C33 (570.0MHz) after switchover
The map below shows all the transmitters in the UK using C33 once digtial switchover is complete. Please click the icon to see the coverage area, and double click for more information.
map is loading, please wait...
What do the map symbols mean?
Saorview multiplex 2.Before switchover
Click on a selection to see the use of the frequency use before switchover:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 C63 C64 C65 C66 C67 C68
Switchover complete
Click on a selection to see the use of the frequency use when switchover is complete:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 * * * * * *
Saturday, 4 October 2014
J
jb3812:59 PM
Coleford
Mike Tucker: If any doubts exist as to whether or not you were previously receiving COM7 transmissions from Mendip, then the easy way to find out is by trying a manual tune on the only two alternatives seen using a couple of test P/Codes, the alternatives being Wenvoe's COM7 on Ch31 and Ridge Hill on Ch32, test codes used being for the GL16 7E_ areas.
By the way, no engineering work is listed as being carried out at Mendip, although even if it was and the power was temporarily reduced, your 100% signal level would not vanish.
| link to this comment |
jb38's: ...
Dave Lindsay
11:07 PM
11:07 PM
Mike Tucker: If you have an aerial in the days of four-channel analogue then it might be a Group C/D one and therefore C33 is out-of-group for your aerial.
See:
Aerials, TV Aerial and Digital Aerial
Basically, Group C/D is the top third of the band of TV frequencies (UHF channels) and such an aerial is most sensitive on those frequencies. (You may have had your C/D aerial replaced to pick up analogue Channel 5 on C37.)
Also, try a manual scan of UHF channel 31, which is COM7 from Wenvoe.
| link to this comment |
Sunday, 9 November 2014
K
Keith5:06 PM
Market Rasen
After switchover unable to receive any channels available via com7 from Belmont transmitter. My Humax freeview/youview box scans and fails to pick up any of them but we did have them prior to switchover....we are only 4 miles from the transmitter!
| link to this comment |
Keith's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
Select more comments
Your comment please