menuMENU    UK Free TV logo Help!



Click to see updates

If you have several TVs at home do you need separate decoders for each set or is

If you have several TVs at home do you need separate decoders for each set or is there a way of connecting them?

If you have several TVs at home do you need separate decoders f
published on UK Free TV

If you want to watch different programmes on different TVs, you need a decoder for each.

With satellite, you will also need a "Quad LNB" on the dish, as each satellite decoder requires a separate "LNB" connection for each.

For digital cable and Freeview, the incoming cable can be split and shared.

There are a few options (such as the Pace Twin PVR) that can be used as a decoder for a second room, using only a standard connection for the second TV.

If you simply want to be able to watch the same programme in a second room, this can be done using a standard TV "UHF" cable.

All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Are all Widescreen TVs digital?1
What connections are used from set top box to TV (such as SCART) ?2
My video doesn't work with my digital TV box, help!3
Can I use a Freeview box if there is no SCART connector on my TV?4
My TV is NICAM, does that mean I have digital TV?5
Why has my widescreen TV just made everyone look fat?6

Saturday, 22 June 2013
6:49 PM

Lol. Ok. This is the state of play because I'm not making myself understood very well.
1. The sender is connected to via scart to the sky box in the living room
2. The receiver is connected to the tv in the bedroom
3. The channel on the sender/ receiver are set to the same channel on each
4. the tv channel is set on its av channel

Everything is wired up correctly, and there is no signal.
What do I need to do differently to make this thing work?

link to this comment
Marlene's 4 posts GB flag

7:34 PM

Marlene: Well you were! but just with a misunderstanding about how the system operates.

However judging by what you have now said suggests that you have everything set up correctly provided that you are referring to the bedroom TV being on its AV channel, and so if the video sender / receiver are both switched on as is the Sky box then there is no reason connection wise for nothing being seen on the bedroom TV, therefore it would be of assistance if you could provide the model number of the video sender being referred to so that this can be checked out just in case there is anything odd about its set up procedure, as variations can exist between different models albeit that the connections are always the same.

Just a small point though, these devices are not very powerful and signal transfer problems can be experienced if the wall the signal is being passing through is particularly dense, only mentioned in case this might apply in your situation.

A second point being, not to have the sender or receiver sitting next to a broadband router.

link to this comment
jb38's 7,179 posts GB flag
9:41 PM

Hi jb38
It's the qose 5.8 GHz wireless video sender & receiver

link to this comment
Marlene's 4 posts GB flag
Sunday, 23 June 2013

8:02 PM

Marlene: If you have connected everything up as per advice given, and being /

(1): The scart lead (supplied) connecting the Sky boxes AV2 scart socket into the "senders" input.

(2): The second scart lead connected the "receiver's" AV output into the bedroom TV's scart input and with this socket being selected as the input on the TV and not DVB.

Then if both external power supplies have been plugged in and switched on (likewise the button on the device) and that you have set the communication channels to the same numbers on each device then nothing can stop the devices working unless the signal is being obstructed, or of course that one of the units is faulty, try moving the receiver to either side of where its postioned as well as experimenting swivelling the dish to either side.

If though you still cannot get it to work then test the unit out by temporarily installing the receiver in the same room as the sender, the procedure to use being to remove the main TV's scart input plug (that comes from the Sky box) and in place of this connect a scart lead from the "receivers" output.

In other words the Sky boxes AV2 is still going into the sender, but the receivers output being is being fed into the main TV rather than the one in the bedroom. If you still do not get a signal try using the Sky boxes AV1 output to feed the sender.

By the way, you "may" have to select AV1 input on your main TV if the receiver does not switch the TV over to its scart input in the same way as happens with the Sky box.

Of course the other way is just to temporarily install the bedroom TV and receiver in the main room, no aerial connection being required by the bedroom TV as its only being used as a monitor.

link to this comment
jb38's 7,179 posts GB flag
Wednesday, 28 August 2013
10:37 AM

Hi i very stupidly disconnected everything and never took note all just for a new stand anyway my brother in law will annihilate me so it goes like this

Livingroom: sharp tv
sky hd
Euro box
Av sender
Need to send signal to bedroom 1 from sky

Bedroom 2 need to get signal from sky via av sender

Loads of cables and scarts just not done it right
Can you help me create the loop I need

link to this comment
Geri's 1 post GB flag
Thursday, 30 January 2014
4:28 PM

I hev a wiztech decoder, can I use it on 2 Tvs in different rooms? if yes, then how?

link to this comment
Moses's 1 post NO flag
Tuesday, 25 November 2014
3:48 PM

Hi. I am having problems connecting a second tv in my house. I have just moved in so I don't fully understand how everything is supposed to work....

I have a new Samsung connected to sky hd in living room - this is working fine
My old tv Grundig GU22DVDBLK is now in a bedroom and is not providing correct signals. It recognises channels when it auto tunes but the picture is shocking. I bought a tv aerial lead and that connects tv to aerial socket on wall. I have only ever used this tv via Sky before.

Do I just need a free view HD box or should this work?

I have Welch 2way bidirectional tv amplifier in a cupboard - cabling untouched. Ie output 1,2 and input all have cables connected.

The Tv aerial is connected to the 'return' socket on the wall where sky cabling comes in.
I share a sky receiver with other houses in my street (all new builds 5 years ago).

Any advice welcomed please.

link to this comment
Kate's 1 post GB flag
Friday, 16 January 2015
Lynne Knight
8:38 PM

Hi, we have Sky + HD box in lounge and a co-axial cable running to conservatory using Sky magic eye to receive same channels as being shown in lounge. We have bought a new TV for conservatory and are having trouble getting the sky channel to appear on this new TV. The best I can get is a very fuzzy/snowy picture and I'm at a loss to make the reception clearer. All connections are good and there doesn't seem to be problem with co-axial cable. Can you suggest anything please?

link to this comment
Lynne Knight's 1 post GB flag

9:19 PM

Lynne Knight: If you are also feeding Freeview into the conservatory via the Sky boxes aerial input socket, then try removing the Freeview aerial connection and see if this clears the problem, if it does then you will have to change the RF channel being used by the Sky boxes RF modulator.

Changing the RF output channel on a Sky+HD box.

(1) : Press "Services" then press > once to "Settings" and press on.

"Picture" should now be highlighted but do NOT press on it.

(2) : Press: "0 - 0 - 1 - Select" and the "Set up" tab should now be

(3) : Press the right hand > button 3 times to scroll along the list to "RF
out" and where the current setting will be seen and where you can change it
by punching in the new number.

Dont forget to press the "green" button to save any changes made before
exiting the menu system.

Should the aforementioned not be applicable, then try removing the magic eye from the circuit, if makes no difference then try the conservatory TV connected directly into the Sky boxes RF1 (not 2) output, if the signal is OK then the lead running into the conservatory has to be defective.

Further advice dependant on feedback.

link to this comment
jb38's 7,179 posts GB flag

9:28 PM

Lynne Knight: By the way, if you do require to change the Sky boxes RF modulator output channel, then do not forget that you will have to rescan the TV used in the conservatory (whilst its set on analogue not DTV) to pick up the Sky boxes new RF output channel.

link to this comment
jb38's 7,179 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.

Privacy policy: UK Free Privacy policy.