menuMENU    UK Free TV logo Help!

 

 

Click to see updates

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?
published on UK Free TV

Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]



Then press [4] to go to the RF output menu.



You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.

HD and "new EPG" boxes

If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.

Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau2
Can I stop paying Sky and use my satellite receiver to get Freeview ?3
I have a Panasonic TV with integrated Freeview how can I record Freeview channel4
My Sky box has a "no signal message" - what do I do?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Tuesday, 1 March 2011
Briantist
sentiment_very_satisfiedOwner

5:55 AM

Carole: You will need to "tune in" the TV to the RF2 signal.

link to this comment
Briantist's 38,910 posts GB flag
Wednesday, 2 March 2011
P
Peter Dent
6:51 PM

Hi, I have just had a new Sky HD box fitted in my living room and now I can't get a picture on my small TV in my kitchen. I gather this is something to do with the RF tuning on the Sky HD box. I have noted the channel is 68 but i have no idea how to tune in the small tv to this channel. All I have succeeded in doing is to delete all the freeview channels which I have failed to be able to retune. All I get is 1 channel, BBC1 which is really fuzzy.

link to this comment
Peter Dent's 1 post GB flag
Briantist
sentiment_very_satisfiedOwner

7:39 PM

Peter Dent: You should put your TV into analogue mode, and then use the tune or autotune in the TV menus.

See the above instructions for finding out the RF channel in use by your Sky+HD box.

link to this comment
Briantist's 38,910 posts GB flag
Friday, 4 March 2011
A
aaron
9:44 PM

need sum help, i av a sky dish n use it2receive free channels via sky box, ( no subscription ) i got given a sky + box and bought a quad lnb adaptor, i installed th lnb and it works for th2 sky boxes, bt i cant pick up ne signal for th sky box, thus cant view ne channels yet th 2 otha standard sky boxes work perfectly, need sum elp, do i need2register th box with sky to pick up a signal, or am i doing sumut wrong,bit puzzled as standard sky boxes work perfectly off th quad lnb adaptor.

link to this comment
aaron's 1 post GB flag
A
aaron
9:52 PM

need help, here goes -

- i av a sky dish, and get free viewing via sky standard box ( no subsrciption & old card )
- i got given a sky plus box,and anotha standard box and bought a quad lnb adaptor
-i installed th quad lnb and it works th 2 standard sky boxes perfectly
- however th sky plus boxe wont pick up ne signal,thus not working
- i av tried to adjust th sky dish, bt still no joy, i no ther is signal strength ther as i plugged standard box in,and works perfectly
- do i need to register with sky2 pick up a signal for th sky plus box or am i doing sumut wrong.

link to this comment
aaron's 1 post GB flag
Thursday, 10 March 2011
K
krups
2:29 PM

hi, got a sony bravia tv. when i watch sky it cuts off the sides of most channels. is this likely to be because i have connected the tv to my digital box with a scart lead rather than a hdmi cable?

link to this comment
krups's 1 post GB flag
Briantist
sentiment_very_satisfiedOwner

2:33 PM

krups: No, it is because you have not selected 16:9 in the Pictures Settings Menu. Why has my widescreen TV just made everyone look fat? | ukfree.tv - independent free digital TV advice .

link to this comment
Briantist's 38,910 posts GB flag
Tuesday, 15 March 2011
D
Dave G
10:36 PM
Chelmsford

Hi. i am trying to change the output channel of RF2 on my sky+ box. I get the menu, type in the new frequency but then just get a white screen when I try to save. TV is connected via scart cable. When I go back to the menu via services etc. channel change has not been saved. Any ideas?

link to this comment
Dave G's 1 post GB flag
Dave's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Thursday, 17 March 2011
T
Tony Davies
1:05 PM
Bolton

My local transmitter is Winter Hill: a new aerial was put in the loft about 6 months agho, when I was told the signal was OK.
At Christmas we supplemented our Freeview TV with new gadgets, and this is how the system is now set up.
The sound from the new Digital Stream HD Freeview PVR is hooked up to the new Home Cinema System, and the the existing Freeview TV is used simply as a monitor, connected to the PVR via a HDMI cable. The RF feed has been going only to the PVR.
Since Christmas the reception from various channels has steadily worsened, until some of the channels generated a "No Signal" display on the TV screen.

Last week, after finding your site, I managed to find the signal strengths, and details for the main multiplexes (and the channel tested) are as follows:
PSB1 (BBC1) 67% Ch62 Q: 46-77%
PSB2 (ITV1) 68% Ch59 Q: 2%
PSB3 (ITV3) 67% Ch58 Q: 0%
COM4 (Dave) 61% Ch61 Q: 15%
COM5 (Yesterday) 60% Ch55 Q: 0%
COM6 (HD) 0% - Q: 0% -

As you suggested, I retuned the PVR before contacting you - and some of the multiplexes disappeared altogether! The list now looks like this:
PSB1 (BBC1) 66% Ch62 Q: 73-79%
PSB2 (ITV1) 65% Ch59 Q: 2%
PSB3 (ITV3) not present
COM4 (Dave) 61% Ch61 Q: 22-29%
COM5 (Yesterday) not present
COM6 (HD) not present

All channels are still available without problem on the TV when connected directly to a RF aerial feed, even when passed through the PVR. However, when the TV is playing a channel from the PSB2 multiplex (the only one left where this effect occurs) via the RF feed and the PVR is set to the same channel, the quality of the picture and sound deteriorate rapidly.

One option you suggest is to change the RF output channel: I cannot find how to access this on the Digital Stream; but would this also affect the signal through the HFMI output?

Please help! Thank you.

link to this comment
Tony Davies's 1 post GB flag
Tony's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.