I have now lost all signal can you tell me what the problem might be?
Brian Butterworth published on UK Free TV The problem could be one of:
- the aerial has been moved or damaged;
- the cables or connectors that connect the digibox to the aerial are damaged;
- the digibox has broken.
If you have a "spare" digibox you use this to test the aerial connection. Can you still watch analogue TV OK?
All questions
In this section
Monday, 22 July 2013
grandma: These devices have two types of guide:
One says Guide Plus and will no longer work. If yours is coming up as Guide Plus then it needs changing to "Guide (Digital)".
Go to System Menu > Initial Setup > Basic > EPG Type Select and change to "Guide (Digital)".
| link to this comment |
Monday, 5 August 2013
C
Charlie Sheppard6:39 PM
I kept loosing tv channels and music channels. I brought a signal booster and since plugging that in I have lost all signal on every channel. Can anyone help please?
| link to this comment |
Saturday, 17 August 2013
G
gavin11:06 AM
My technika dvd digital built in tv wont giv me any channels try to tune it in wont let me on dtv no signal bt it will let u tune n search on normal tv which is no good
| link to this comment |
Monday, 19 August 2013
M
Mary Fletcher10:20 PM
We have a panasonic recorder DMREX75 and it won't now show any digtal channels. Please help.
| link to this comment |
Thursday, 22 August 2013
Mary Fletcher: Have a look at the Freeview reception has changed? | Freeview Interference | ukfree.tv - 11 years of independent, free digital TV advice page for some suggestions please.
| link to this comment |
Monday, 9 September 2013
D
Dean8:05 AM
Lost (08/09/13) all Freeview reception in Tonbridge, was working in morning, no signal for 16 hours or so! Any thoughts?
| link to this comment |
D
Dean10:04 AM
Hi Briantist: Thank you for your reply. I have around 4 units running off a fitted roof aerial. In fact I tried to connect a new TV yesterday and ran the set up, but it couldn't find any signal. As in my previous question, everything was running fine in the morning. I'm rather puzzled?
| link to this comment |
Dean: There are no TV transmitter faults anywhere in the UK this morning.
Did the problems start before or after you "tried to connect a new TV"?
Perhaps you have a powered splitter box? If so, I would check the fuse, or bypass it by connecting one of the TVs directly to the "input" to the splitter.
| link to this comment |
D
Dean10:15 AM
Briantist: It happened before I fitted the new TV. Although I had disconnected the old one a couple of hours previously. A splitter box is located on an outside wall, so will need to check this out. Thank you for your advice.
| link to this comment |
Select more comments
Your comment please