Feedback
For the last six years, I have answered many thousands of personal emails that you have sent to UK Free TV.
Sadly, I am unable to offer this personal service at the moment.
Until I can restore this service, please can you leave any questions you have on an appropriate page, where they will be answered as soon as possible, or below, if you can't figure out where to ask.
I look forward to your questions!
Help with TV/radio stations?
In this section
Sunday, 13 July 2014
Hi i seem to hvae lsot reception to Freeview 11 and 12 Pick and Dave are thare any known problems?
My postcode is IP31 2JH
link to this comment |
David's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Giant rollup TV's (BBC News/Technology) See; BBC News - Giant rollable TVs on the horizon, says LG (RH163LB) !!
link to this comment |
Monday, 14 July 2014
S
Steve P12:17 AM
Ade I don't know. Ask on an Irish in UK website.
Or try with an Irish box.
link to this comment |
David Messer: Channels can disappear for a number of reasons. In my experience it is often a reception problem. This can be due to water in the aerial or water in the cable or interference from Tree growth. Did the loss happen over time or almost immediately?
link to this comment |
Tuesday, 15 July 2014
M
mark6:48 PM
No Signal Help. Recently lost signal 2 input. Switched cable input into box and can then get input 2 but not one. Checked all cables, dish and tried troubleshooting options listed here
link to this comment |
MikeP
8:38 PM
8:38 PM
Mark
I will assume you are talking about a Sky+ box? If that is the case then by swapping the two cables between the inputs you have shown that there is a fault with the feed that was originally plugged into Input 1. The possibilities are that the cable has a fault, the connectors at end (or both) have a fault, possibly a short circuit (often caused by the fine braid outer screening touching the inner core) or else the LNB on your dish has developed a fault.
Do you have a dual LNB or a Quad? The first has just two output connectors inside the weather cover and the latter has four connectors. If you have the latter, and you can gain safe access to the LNB, you might try swapping the twpo cables to the other pair of connectors. But do make sure they are screwed on correctly and the weather cover is put back in place to prevent water getting into the cables.
link to this comment |
MikeP
8:39 PM
8:39 PM
Mark.
Applogies, I meant that you have shown that the feed that was originally Input 2 is faulty. Input 1 feed ios still working fine.
link to this comment |
M
michael8:43 PM
I keep meaning to ask : what do the coloured bars at the bottom of each posting signify? ( It was doubtless explained somewhere, but I missed it.)
link to this comment |
M
mark10:02 PM
thanks for the reply Mike.
Just to be sure, the fact that the socket on the sky+ box won't register input 2 or input 1 (when cables are switched) indicates cable or LNB fault not box fault ?
appreciate your help
mark
link to this comment |
J
Julian10:42 PM
I live in North Swindon, I am trying to realign an old aerial to the Mendip transmitter by copying the direction of nearby aerials. The channels I am receiving are mainly 41 and 47 Wenvoe ? My research indicates this should be 49, 48, 52 etc. Both my neighbours have aerial amplifiers i read this should not be necessary for freeview?
link to this comment |
Select more comments
Your comment please