There are no longer any television transmissions on the The Wrekin B (Telford and Wrekin, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.670,-2.552 or 52°40'13"N 2°33'6"W | TF6 5AH |
The symbol shows the location of the The Wrekin B (Telford and Wrekin, England) transmitter. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the The Wrekin B (Telford and Wrekin, England) transmitter.This transmitter is no longer being used for TV
In the past, television services were provided from this transmitter. However, these have not been withdrawn.Please see the table below for details of the historic used of this transmitter location.
How will the The Wrekin B (Telford and Wrekin, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 27 Feb 2018- | |||||
A K T | A K T | A K T | A B C/D E K T VHF | A B C/D E K T VHF | |||||
C23 | ITVwaves | ITVwaves | ITVwaves | ||||||
C26 | BBC1waves | BBC1waves | BBC1waves | ||||||
C29 | C4waves | C4waves | C4waves | ||||||
C33 | BBC2waves | BBC2waves | BBC2waves | ||||||
C35 | C5waves | C5waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 6 Apr 11 and 20 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 100kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-17dB) 2kW |
Local transmitter maps
The Wrekin B Freeview The Wrekin TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the The Wrekin transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldWednesday, 27 April 2011
A
Aerialman6:03 PM
Richard Turner,you can receive the public service channels in upper Welshpool,off the Wrekin,hopefully,eventually all services,after Sept 28th.
link to this comment |
Wednesday, 4 May 2011
A
Allan Gainer5:42 PM
Wolverhampton
Thanks for your help, Briantist. All working perfectly since the retune was completed on 20th April.
link to this comment |
Allan's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
Allan Gainer: Thanks, I'm pleased to hear everything is working for you.
link to this comment |
Friday, 15 July 2011
T
terry11:59 PM
Kidderminster
hi just wondering if the wrekin transmitter is now at its strongest output, i live in kidderminster dy10 1lf, and unfortunately according to aerial installer i can only get a signal from the wrekin! my signal is pretty poor on some channels eg more four and itv3 and 5* and i cant get alot of the chanels such as itv4, pick tv, film 4 etc, my aerial is approx 18months old and is mounted on the roof, is this the best its going to get?
link to this comment |
terry's: ...
Saturday, 16 July 2011
K
KMJ,Derby5:56 PM
terry: The COM muxes from The Wrekin are currently using temporary frequencies at low power.On 28th September 2011 the frequencies will be changed and power increased. The Digital UK postcode checker currently does not make any prediction for reception of the COM muxes from The Wrekin, after 28th September reception is shown as poor. It does however predict that you should already have a full Freeview service from Ridge Hill with good reception on all muxes, and after 21st September 2011 all six muxes should be available from Sutton Coldfield, all with excellent reception. These predictions are, of course, subject to no local obstructions such as trees or tall buildings blocking the signal path.
link to this comment |
A
Aerialman6:00 PM
Terry,you should be able to receive all channels fom Wed 28th Sept,if you then do a first time installation.Channels such as ITV 3 5* wil be transmitted at a much higher power also.
link to this comment |
Wednesday, 11 July 2012
A
A1batman10:25 PM
Sandbach
Central frequency range aerial on roof and can get all programs on mux's PSB1, PSB2, COM4, but not mux's COM5 & COM6. The TV's indicated signal strength and quality for rf channel 41 is 63% and 66% respectively. All programs on this frequency tune in okay, where as the sig level and strength for rf channel 44 is only 61% & 58% but no programs are found. Is this likely to be due to the lower power output level for mux COM5 although it's indicated as being the same output level as COM4 which gives me no problem. Is the power output going to be increased from the indicated 10Kw in the near future?
Kind regards from A1batman.
link to this comment |
A1batman's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
A1batman: The COM channels do not have as wide a coverage as the PSBs. They are only carried on the largest transmitters and in some cases are at lower power, as is the case with The Wrekin.
Have you had your Group A aerial replaced with a wideband (or Group K) one?
How does the strength of PSB1 and PSB2 compare to COM4?
The sensitivity of a Group A aerial will drop off outside of the Group.
For aerial groups, see:
Aerials, TV Aerial and Digital Aerial
Some example gain (sensitivity) curves:
Gain (curves), Again
If you do have a Group A aerial (red tip) and am looking for information, either to be briefed when you get a professional in, or to do it yourself or get a friend who likes heights to do it, then see:
The Wrekin
link to this comment |
Tuesday, 25 September 2012
L
Lib2:53 PM
Stourbridge
I have re programmed my 2 tvs but now have lost channels 18 & 19 on 1 why?
link to this comment |
Lib's: mapL's Freeview map terrainL's terrain plot wavesL's frequency data L's Freeview Detailed Coverage
Friday, 7 April 2017
J
john12:35 PM
hi,my new sky dish double black cable comes into my daughters room and her sky box works from either cable of the double cable,i tested both and made sure.
so to get freesat box working in the next room on another tv i've attached a tv cable to the spare line of the double cable and run through to the spare room,but for some reason when i connect the cable to the freesat box and then to the tv all i get on the tv screen are the channel number and titles,but no picture,the box is fine i know it works.
what can be causing their to be no picture? ive done exactly the same thing downstairs using the double cable,one to the sky box in the front room ,and then added tv cable to the the spare one of the double and to my kitchen freesat box,thats working perfectly?
doing my nut in cant understand it,any suggestions,john
link to this comment |
Select more comments
Your comment please