What can I do when my Sky Digibox says 'No Signal' or 'Technical fau
![Contributor picture Brian Butterworth](https://de8as167a043l.cloudfront.net/styles/userimage/230680524.jpg)
How to Reset a Sky Digibox when 'No Signal' appears.
Reset method 1 - Delete and Rescan
- Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.
- Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.
- Check cables and connectors are in good order.
- Wait for at least 30 seconds.
- With the card still out of the machine, plug the Digibox back into the mains.
- Ignore all the messages, and wait for around a minute.
- Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
- Insert viewing card, wait a few seconds.
- Check 104 for Channel 4 and 105 for five.
Reset Method 2 - Reset the LNB
If the above method does not work, the LNB may have a fault.- Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]
On Sky HD, press the [SERVICES] button and then press [0] [0] [1] then [SELECT]
Press the buttons in the sequence above exactly - do not atttempt to use [UP] or [DOWN]. Note that when you press the second 0 and 1 nothing happens on the screen until you press the final [SELECT]. This is a "hidden menu". - Then press [1] to go to the RF output menu.
- Press [DOWN] three times to highlight the line 22Khz Command and then press [RIGHT] to change the value to [OFF].
- Press [DOWN] and [SELECT] to select Save New Settings.
- Press [SKY].
- Again press [SERVICES], [4], [0], [1], [SELECT]; then [1] again for the LNB Menu. (SERVICES 0 0 1 SELECT for Sky HD).
- Now press the [RED] button (reset all settings), then [DOWN] until you can select Save New Settings again.
- Press [SKY].
Reset Method 3 - Upgrade the system software
If there are still problems:- Turn the Digibox off at the mains again and remove the viewing card.
- Whilst holding down the BACKUP key on the Digibox - NOT ON THE REMOTE - turn the mains power on.
- Keep hold of BACKUP until the screen displays a "UPGRADING SYSTEM SOFTWARE" message ââ¬â this will be white text on a black screen. On some boxes this can appear as a half screen.
- Wait 10 to 20 minutes for the software to download and install. The box will restart when the process is complete.
- Ignore all the messages, and wait for around a minute.
- Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
- Insert viewing card, wait a few seconds.
- Check 104 for Channel 4 and 105 for five.
All questions
In this section
Saturday, 14 April 2012
S
sam10:48 PM
Hello my sky box has been playing up for the last 6 weeks. It goes funny and then says no signal. If i turn it ofem at the plug it works for about 30 mins and then does it again. I have done all the tests so now i need help please
link to this comment |
Sunday, 15 April 2012
J
jb387:26 AM
sam: If your box "always" works again for a limited period of time after having been temporarily disconnected from the mains supply then that generally points to a defect in the boxes internal power unit, not exactly an uncommon thing to happen.
link to this comment |
Tuesday, 17 April 2012
L
Larry10:41 AM
Hi
I hope to receive some advice from ye. Up to very recently I was getting perfect free to air reception on a sky pace box with the sky card upside down and this was over the last 3-4 years after I stopped having sky subscription tv.
I watched the tv one night last week and reception was perfect. The following night a error 29 message appeared, 'No signal received etc'. I am handy enough at TV tuning and checking leads etc.I dont believe its the dish that suddednly moved overnight and anyway had far worse weather over the years and I dont believe its the leads and rf cables as checked them too and look ok. I have checked the box and even updated it with the updated software and still to no avail so I am at a loss to know what it could be!
Could it be that the sky viewing card has expired?
Could it be that Sky have deactivated the signal given that I no longer pay for subscription TV or is that my imagination getting carried away?
Unlike the free to air non sky boxes the sky box requires a viewing card to view even the free to air channels?
If its the card that has expired or Sky has deactivated anyone know where I could get a cheap card or a way around this?
Regards
Larry
link to this comment |
J
jb385:31 PM
Larry: All Sky boxes no matter of what type can receive "free to view" programmes without a card inserted.
You should carry out a signal check by pressing "services" then 4-6, but if nothing is seen indicated on the strength / quality bar then its either the box itself has failed (usually the power unit) or that the dish has moved a fraction, other possibles being that the "F" connector plug might be internally waterlogged, or the LNB has developed a fault.
The only way you can verify one way or the other where the fault might be is by either trying another box on your dish, or alternatively your box on another dish.
link to this comment |
R
Richard8:31 PM
hello. i've got a very old sky box and it works fine. im thinking of getting a amstrad sky hd + box. but i only really want to splash the cash if im able to get hd channels n be able to record channels via a community aerial the council installed. would this work. thanks in advance its really doing my head in
Richard
link to this comment |
Wednesday, 18 April 2012
J
jb381:11 PM
Richard: When you say "community aerial" are you meaning dish? as a community (or communal) aerial is used for Freeview reception and not satellite, so if you are "not" meaning dish then that aerial connection is of no use for Sky.
Another point to note is that you cannot record or playback anything on a Sky+ box unless you pay a subscription to Sky, as only then will Sky unlock access to the recording side of the box, as otherwise the box will just operate like any other Sky box.
The other thing to keep in mind being that you really require to have two feeds from the dish for satisfactory operation of a Sky+ box.
On the plus side you should be able to receive non-subscription HD channels such as BBC / ITV etc.
link to this comment |
R
Richard6:45 PM
ah thank you. yeah its a dish n aerial. i got two sky ports, a radio port n a tv port. think i'll save up for them a humax box then. thanks for the info.
link to this comment |
Thursday, 19 April 2012
S
sheldon8:33 AM
Now that we have gone digital I am unable to get the sky channel and if I reload the analogue channel I get a picture but no sound
link to this comment |
P
Peter Walters8:49 AM
I have a splitter which distributes Sky and Freeview. Since 18th April Freeview has a good signal 70% but Sky picture has deteriorated.I can no longer use reset method 2 or 3. could it be that my sky digibox is out of date?
link to this comment |
M
margaret price11:21 AM
Harrow
I have all the channels except ITV 1. I am using an indoor aerial which onbviously works for all the BBC channels etc. What is wrong?
link to this comment |
margaret's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Select more comments
Your comment please