Hi. For me to help you, just think of your problem and answer each question in turn. First, are you seeing the words "No Signal" or "Technical fault" on the TV screen?
Click if no Click if yesStart again
Tuesday, 29 March 2022
C
Chris.SE4:32 PM
ray:
It is location dependent on which multiplexes you can receive, sometimes a predictor can give results that represent part of a locale and not a specific postcode.
London TV (LCN8) is carried on the Local Multiplex UHF C35 for the London area.
That's TV (UK) LCN91 is carried on the COM7 HD multiplex UHF C55. there could be several reasons that you aren't getting this.
You need a set with a T2/HD tuner - do you get BBC1,2, ITV, C4, C5 in HD on LCNs101-105 at all? If so you have a T2 tuner (but note, those stations are carried on the PSB3 multiplex).
COM7 C55 is transmitted at lower power than the other main multiplexes - it is only a temporary mux in any event and is due to close by the end of June 2022, there's been no announcement about what may happen to the channels on it.
If you have a very old aerial, it may be channel Group A, which will not pick up C55 unless you are very close to the transmitter. It's would not be worth spending any money changing/upgrading the aerial when COM7 is due to close in 3 months.
If you provide a full postcode, we should be able to advise about your reception predictions.
link to this comment |
Tuesday, 24 May 2022
C
Chris.SE1:43 AM
david faulkner:
It's quite well known that HDMI can cause interference to some UHF channels but especially UHF C55 (COM7). It's best to keep aerial cables as well separated as possible from other cables such as HDMI, mains etc.
link to this comment |
D
david9:37 PM
Chris.SE:
thanks....all seems good today - 100% quality on all channels
looks to have been an issue with the connections on the outer / screen...I tightened up all the outer rings and the problem has gone....for now!
link to this comment |
D
david9:44 PM
david:
and I get the same error when I try to subscribe to messages..... and I never get notified of any replies
link to this comment |
C
Chris.SE10:01 PM
david:
Thanks for that. Hopefully the site owner can sort that out. You can ignore the fatal error when posting as the posts still seem to get through, but wait several minutes before checking that the post appears.
link to this comment |
Wednesday, 25 May 2022
I'm just postiing this test message to see if the PHP error message outputs
link to this comment |
Brian's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
C
Chris.SE1:05 PM
Brian Butterworth:
Thanks for taking a look at this Brian.
link to this comment |
C
Chris.SE1:10 PM
The previous post still took well over two minutes to appear.
link to this comment |
C
Chris.SE1:10 PM
Although that last one appeared instantly.
link to this comment |
C
Chris.SE1:13 PM
Well that was on "The most recent postings"/"Your comments page". It still took time to appear here.
link to this comment |
Select more comments
Your comment please