By providing a full postcode (such as W1A 1AA), national grid reference (for example SE123456) or latitude, longitude pair (like 54, -0.5) this page will provide a map, terrain plot and detailed information of the location showing the UK and RoI television transmitters that it is possible you receive Freeview, Freeview HD, Youview, BT TV and Saorview from.
(Don't know your postcode? Find it at Post Office Postcode finder).
UK Free TV uniquely shows you transmitter coverage maps, aerial to transmitter terrain plots, the closest 10 mobile phone masts (for possible 5G-at-800 interference) as well as tabulated information (sorted by direction, by received signal strength, by frequency, by service names or by transmitter name).
Your privacy is important
We do not pass information onto third parties and will not contact you by email. Please see our UK Free Privacy policy.
See sample prediction pages
Click on these links to see how this page looks with these sample postcodes: NP253NQ, OL82ES, DY139NG, SL19HE, KY114XP, NE716DN, LU69NB, ST179UE, E58TN, CM186DP.
Please note
These predictions are based upon a rooftop aerial and depend on the suitability of the aerial, the distance to the transmitters, the power of their signals, the postcode area, and local terrain.Monday, 19 February 2018
MikeP
11:08 AM
11:08 AM
Peter Rance:
Having your neighbour's aerial leaning against yours does not help either. You need to get them to have it refitted correctly so it does not touch or even get near to yours.
| link to this comment |
P
peter rance1:43 PM
MikeP: Thank you mike very helpful, ill look into that once my new tv arrives
| link to this comment |
Tuesday, 20 February 2018
P
peter rance12:51 PM
Hi again Mikep i looked at attenuators, there are 3db 6db and higher, So i am totally confused as to what one i should be getting, also is it a connection where i can take my arial out of the humax and plug it into the attenuator then back into the humax freeview, or do i need a Arial guy to fit it outside on the arial, God im thick .any help much appreciated
| link to this comment |
P
P Mitchell1:39 PM
Macclesfield
Freeview reception at my address in Macclesfield has always been problematic. Reception is fine but the problem is that I receive only 20 TV channels and 16 radio channels despite having done the rescan as described above. I have two television sets and a DVR, all of which receive the same small group of Freeview channels.
I once did a rescan on the main TV and lots of new channels came up. However, when I tried to watch any of these new channels, no sound or picture appeared.
I know my aerial is pointed at a smaller (relay?) transmitter rather than at the main transmitter for the area.
My postcode is SK10 2EH
| link to this comment |
P's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
M
MikeB2:17 PM
peter rance: The easiest way to think about it is that signal strength is measured in db, and therefore a 3db attentuator will reduce that by 3, a 6db by 6, etc.
Obviously you dont know exactly how much you need to reduce the signal strength until you try it, and remember that different muxes have different strengths - so that reducing a very powerful mux will also impact a weaker one - its a balancing act.
Get a range of them - a 3, a 6, and a 9 would be a good start - the ones from Amazon are fine and you'll save on postage by buying two or three. They are very easy to fit - simply get the existing aerial lead, and push one onto the end. And then get another aerial lead (they are cheap enough) and plug into the back of the PVR, etc.
If the signal strength comes down to around 75% on the mux you are having problems with, job done. Start with the smallest number - you can always add more. If 3db isn't enough, try the 6db instead. And so o. You can also combine them together (the fit together), so that a 3 + 6 = 9.
Its not perfect, since signal strength can be slightly different at different times of year, each tuner might be slightly different, and the muxes are not all the same power, but it should cure much of the problem.
If you have a booster, etc that you can bypass, that will make life much easier. In my case, I have a masthead amp plus another one in the loft which I have bypass at some point (there was even a third one when I first moved in!). Good luck.
| link to this comment |
M
MikeB2:24 PM
P Mitchell:
Have a look at the links below your post - it will show you that although the local 'light' transmitter is the one that will get you the best signal, it also has the fewest channels.
Winter Hill looks like a good get for you, even though the terrain checker looks like there is something in the way pretty close to you. However, its pretty much in the opposite direction from the local transmitter, so while you might get it off the back of the aerial, its likely to be a bit iffy, unless you move the aerial. Check what the rest of the road is doing.
You can either go for Winter Hill, but move the aerial, or perhaps think about Freesat - if you've a dish already, all you will need is a receiever or PVR, and many TV's have a sat. tuner built in anyway. But since you have an aerial, perhaps its modify what you've already got.
| link to this comment |
P
P Mitchell5:56 PM
Macclesfield
MikeB:
Many thanks for explaining the situation.
You are absolutely right, of course, to say that the local transmitter has far fewer channels than the main transmitter at Winter Hill. I never knew that before today but, having checked the relevant link, I now see that the local transmitter is, in fact, doing an excellent job of transmitting every channel it has available and that my two TVs and DVR are doing an excellent job of receiving them even though the total is only 20 TV channels.
Having today taken a short walk up and down the road outside my house, I see that some aerials are pointed towards Winter Hill while others are pointed towards the local transmitter.
Interestingly, If I cast my mind back 30 years when I moved into this house, I do now recall an aerial fitter explaining that the Winter Hill signal would be impeded by two large trees about 30 yards from the house and that the signal would be even worse in summer when they were in leaf.
| link to this comment |
P's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
P
peter rance6:01 PM
MikeB: ok i undestand that, so around 75% should be about right, as they are cheap ill get a few ,Thank you once again for your help
| link to this comment |
Thursday, 22 February 2018
B
Bob10:59 PM
Stonehouse
We are at GL10 3BJ but receive our Freeview signal direct to the Mendip Transmitter. Out TV aerial is pointing to the Mendip Transmitter. Should our reception change in March 2018 please?
| link to this comment |
Bob's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
Wednesday, 28 February 2018
C
Chris9:33 PM
Otley
ITV3 is now available on all Freeview transmitters on channel 788. Apparently it is higher resolution than the existing transmission on channel 10 (for those on full service transmitters) Presumably it will become the default broadcast after a testing period.
| link to this comment |
Chris's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Select more comments
Your comment please