By providing a full postcode (such as W1A 1AA), national grid reference (for example SE123456) or latitude, longitude pair (like 54, -0.5) this page will provide a map, terrain plot and detailed information of the location showing the UK and RoI television transmitters that it is possible you receive Freeview, Freeview HD, Youview, BT TV and Saorview from.
(Don't know your postcode? Find it at Post Office Postcode finder).
UK Free TV uniquely shows you transmitter coverage maps, aerial to transmitter terrain plots, the closest 10 mobile phone masts (for possible 5G-at-800 interference) as well as tabulated information (sorted by direction, by received signal strength, by frequency, by service names or by transmitter name).
Your privacy is important
We do not pass information onto third parties and will not contact you by email. Please see our UK Free Privacy policy.
See sample prediction pages
Click on these links to see how this page looks with these sample postcodes: CF402RP, SY235PH, BH89PP, TF65DF, N1P1XD, LS279QA, NE51JR, EH126JH, PR83HZ, M274HH.
Please note
These predictions are based upon a rooftop aerial and depend on the suitability of the aerial, the distance to the transmitters, the power of their signals, the postcode area, and local terrain.Thursday, 27 September 2018
L
Les Phillips9:21 AM
Tiverton
Martin: Loss of signal. Lots of pixilation on all channels.
I believe the aerial is directed at Stockland Hill
| link to this comment |
Les's: mapL's Freeview map terrainL's terrain plot wavesL's frequency data L's Freeview Detailed Coverage
MikeP
10:34 AM
10:34 AM
Chris:
Tacolnston transmitter is working correctly at present and no faults reported.
Please check your aerial system and connections.
| link to this comment |
MikeP
10:36 AM
10:36 AM
Les Phillips:
Please check your aerial cables and connections. If there are coaxial plugs/sockets please unplug them and refit. That will clear any corrosion/oxidation of ther contacts, which is a well known cause of the problems you report. DO NOT RETUNE.
| link to this comment |
Saturday, 29 September 2018
K
Kirk10:17 PM
Hull
I have an Edison HDMI Modulator for my CCTV system and have tried setting it to various channels, no matter what channel I select, when in use I cannot tune in any bbc / itv etc channels on my TV's.
Any help on channel selection to eliminate signal loss would be appreciated.
Location - Humberside
| link to this comment |
Kirk's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
Sunday, 30 September 2018
MikeP
11:19 AM
11:19 AM
Kirk:
Assuming you are tuned to the Belmont transmitter, try using a channel between 40 and 49 as they are not used by that transmitter now nor in the future.
However, it could be that the HDMI cables are radiating themselves and disrupting the TV UHF signals carried by the aerial cables- expecially if they are close to each other. So try moving the cables as far apart as is reasonably possible. If that helps then it is worth considering buying better cables with improved screening.
| link to this comment |
Monday, 1 October 2018
C
Chris10:50 AM
MikeP
Thanks for the Tacolneston advice. With no equipment changes the Channel 56 signal was off and on for me on Thursday/Friday (varying no signal at all to 90%) but stable since Saturday pm. Maybe there has been some 'tweaking' going on and I am right on the edge.
| link to this comment |
C
Chris4:24 PM
Hmm,. Channel 56 Tacolneston back to zero signal again, channel 55 (also a low power transmitter) is 95% signal. Something must be going on!
Chris
| link to this comment |
Tuesday, 2 October 2018
MikeP
10:27 AM
10:27 AM
Chris:
Have you checked your aerial connections as previously suggested? Poor connection can cause loss or interuption of just one channel. There is no reported work at the transmitter at the time of writing.
| link to this comment |
C
Chris7:38 PM
Saxmundham
Yes, I have checked these thoroughly and re-terminated a couple I thought might be imperfect - no change. What I can't understand is why COM7 on channel 55 is consistently 90% signal strength, 90% signal quality, whilst COM8 (which I thought had about the same 24kW output at COM7) and is on a bearing of 142 degrees from Tacolneston to me, and therefore not restricted by the radiation pattern (according your polar diagram), is currently zero signal today and yesterday (but was solidly 90% on Saturday and has in previous weeks been absolutely fine). 8MHz higher frequency should not affect reception that much.
Are we sure the wind hasn't blown the COM8 aerial away!? A comparison of channel 55 and 56 signal strengths at your location might be interesting.
| link to this comment |
Chris's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Wednesday, 3 October 2018
MikeP
11:16 AM
11:16 AM
Chris:
The aerial at the transmitter radiates ALL the channels, there is not a separate aerial for any of the multiplexes. They all use a design known as a trapezoid slot aerial where the signals are radiated from different sections of the slot depending on the frequency. So they are all radiated by all the trapezoid slots and not by separate aerials for each multiplex.
An 8 MHz difference in frequency can make a considerable difference to the transmission and reception of the signals.
Looking at the Digital UK Coverage Checker for your location, see Coverage Checker - Detailed View it shows that reception of COM8 is expected to be poor and unreliable, as it is for other multiplexes from Tacolnston.
Where is your arial positioned? If it is possible, it might be worth trying a different position - on the othert end of the roof perhaps? Such a change has given good results in the past in my experience.
| link to this comment |
Select more comments
Your comment please