menuMENU    UK Free TV logo Help!

 

 

Click to see updates

My Sky box has a "no signal message" - what do I do?

My Sky box has a "no signal message" - what do I do?

My Sky box has a  no signal message  - what do I do?
published on UK Free TV

If you are getting the message "no signal" this would indicate that there is a problem with the signal from your dish into your box. Even without a card inserted into a Sky Digibox, if there is a signal, you will always get Sky Guide and the free channels.

Try powering off your box, remove the card, check carefully the cables, especially the connection to the dish, reapply the power and then when asked to insert your card you should then be able to see (for example) Sky News on 501 and the BBC News channel on 503.

Once you can see any channel, reinsert your card. This should, after about one minute, give you the channels you expect, such as 103, 104 and 105.

There are three ways you can attempt to reset your box. Please see What can my do when my Sky Digibox says 'No Signal' ?.

If you continue to get "No signal", you dish may have been misaligned, or there may be a fault with the cables and connectors, or a problem with the Digibox. You can see the signal strength by pressing SERVICES, then 4-SYSTEM SETUP and 6-SIGNAL STRENGTH.



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau2
Can I stop paying Sky and use my satellite receiver to get Freeview ?3
I have a Panasonic TV with integrated Freeview how can I record Freeview channel4
How do I change the RF output channel on a Sky Digibox?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Thursday, 7 November 2013
M
mel
4:37 PM

I recently changed my sky (multiroom) box to a sky+ box which when I installed worked only 2 days later some channels were missing saying no signal until eventually no signal on any channel I called sky who said I have a wiring issue and therefore need to pay them to come out . I have gone back to my original box which is working just fine on all channels !!!! As the +box was my aunts ive been told to reset the box which I have but still not recieving signal. Any ideas????

link to this comment
mel's 1 post GB flag
J
jamie stevens
sentiment_satisfiedSilver

5:43 PM

mel:

If the box still does not work after a reboot then there is clearly an issue with the box.

Even if the box was working at your aunts house, they never choose a specific time to develop a fault.

regards

link to this comment
jamie stevens's 207 posts GB flag
Sunday, 22 December 2013
F
Faraz
6:07 AM

Hello my problem is that 1 of my standard sky box has a 'no signal' message however I also have a hd sky plus box and another standard sky box and those 2 are working just fine and all 3 of my sky box are connected to the same dish, I have tried everything from checking the wires to updating the box nothing seems to work do you have any ideas? Thx

link to this comment
Faraz's 1 post GB flag
J
jb38
sentiment_very_satisfiedPlatinum

9:01 AM

Faraz: If the box in question has been disconnected from the mains and its LNB input feed being swapped over with one used by one of your other boxes that's known to be OK, then if when you power the box up again and the result of its "searching for listings" is another "no signal" message then its almost guaranteed that its internal power supply has failed, something not exactly unheard of in older boxes.

link to this comment
jb38's 7,179 posts GB flag
J
jb38
sentiment_very_satisfiedPlatinum

10:22 AM

Faraz: In addition to that said, prior to carrying the out the aforementioned check that the boxes LNB settings are as below.

Procedure:
1. Press sky followed by services.
2. Highlight "System Setup" and press select.
3. Press "0 then 1 then select".
4. Press select again to access the LNB setup screen.
5. Press the red button to re-set the default settings.
6. Using the up/down arrows, highlight "Save New Settings" and press select.
7. Press select to confirm that the settings have been reset.


The correct settings are:
- 9.75 for the low frequency.
- 10.60 for the high frequency.
- The LNB power supply should always be set to on.
- The 22KHz Command should always be set to on.

link to this comment
jb38's 7,179 posts GB flag
Monday, 23 December 2013
M
M. Joshi
11:42 AM

Just noticed a typo when reading this page:

If you continue to get "No signal", you dish may have been misaligned,

It should be your dish.

link to this comment
M. Joshi's 1 post GB flag
Tuesday, 24 December 2013
L
Linda
9:41 AM

Hi our sky + hd box says no signal , we have tries re powering.
In a sky box upstairs works fine it's not hd
We unplugged and put our old sky + in and that is fine , it just seems to be the sky +hd .?
We have tried 2 boxes now so it can't be the box

link to this comment
Linda's 1 post GB flag
J
jb38
sentiment_very_satisfiedPlatinum

4:36 PM

Linda: If the disconnecting from the mains procedure has not resolved the problem then the next step is to try a "new installation" as per the undermentioned instructions.

1 : Press "Services" on your Sky remote and you'll see the "Options" menu highlighted.

2 : Press the right arrow to select "Settings" then press on same.

3 : Press (in smooth succession) " 0 - 1 - Select" to view the set up screen.

4 : Press the right arrows to highlight "Install" which then changes to "New Install" then press "select".

5: Follow the instructions on your TV screen until you see the message"Installation Complete" displayed then press select.

Further info dependant on feedback..

That said is on the assumption that you have tried swapping the two input feed cables over whilst the box was disconnected from the mains?


link to this comment
jb38's 7,179 posts GB flag
Monday, 13 January 2014
D
d vlajcic
1:15 AM

I have the Sky Guide, but neither channel shows the programme. This morning everything was alright, but at 10pm I could not follow any programme whatsoever.

link to this comment
d vlajcic's 3 posts GB flag
D
d vlajcic
1:18 AM

Sirs,

ACCOUNT .220023881125

I have recently arranged by telephone with Sky viewing certain programs for a monthly payment of £13.50. It was agreed that instead of paying £10 for the use of recording facilities only, that I could follow light entertainment for that price, too.

When I turned on Sky today, I found to my amazement that not only light entertainment channels were taken off, but also all BBC and ITV channels, the news and everything that belonged to FreeView package.

You have taken £18.50 last month, and you will presumably take £13.50 this month, but will you please explain to me what is going on with my channels and what will £13.50 cover?

You do not seem to answer to my correspondence.

Regards,

Dobrivoje Vlajcic

link to this comment
d vlajcic's 3 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.