There are no longer any television transmissions on the Croydon (Greater London, England) transmitter
 | Google map |  | Bing map |  | Google Earth |  | 51.410,-0.086 or 51°24'35"N 0°5'10"W |  | SE19 2QN |
The symbol shows the location of the Croydon (Greater London, England) transmitter. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Croydon (Greater London, England) transmitter.This transmitter is no longer being used for TV
In the past, television services were provided from this transmitter. However, these have not been withdrawn.Please see the table below for details of the historic used of this transmitter location.
How will the Croydon (Greater London, England) transmission frequencies change over time?
| 1955-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 31 Mar 2018- | ||||
| VHF | A B C/D E K T VHF | A B E K T | A B E K T | A B C/D E K T VHF | A B C/D E K T VHF | ||||
| C9 | ITVwaves | ||||||||
| C37 | C5waves | C5waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 4 Apr 12 and 18 Apr 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 5 | 1000kW |
Which companies have run the Channel 3 services in the Crystal Palace transmitter area
|
|
Tuesday, 26 January 2021
C
Chris.SE7:36 PM
Brenda:
What sort of aerial are you using? That close to the transmitter reception should not be a problem. Make sure it's still pointing at the transmitter - about 8 degrees east of due N, and it's rods horizontal.
Check all your coax plugs etc for bad connections or corrosion. Remove them and plug them in again.
Have you changed anything? Make there are no HDMI leads close to aerial leads or flyleads.
You should be able to get excellent signals from the Crystal Palace transmitter, but if you are using an indoor aerial you may not reliably pick up signals at present as the transmitter is listed for Planned Engineering with "Possible weak signal".
If you retuned at any point when signals were missing, it will likely have just cleared the correct tuning and you'll need to retune again.
| link to this comment |
Select more comments
Your comment please