menuMENU    UK Free TV logo Help!

 

 

Click to see updates

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound o

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+
published on UK Free TV

To deal with the problem you must clear the channel list completely and then rescan - if your box has it in the menus, please the 'installation menu' to do an initial scan or a reset to factory settings or First Time Installation. You MUST delete the entire existing list of channels. On most boxes this technique can be also be used:

Try this:

1) unplug your Freeview box (or idTV) from the mains;



2) unplug the aerial from the Freeview box by disconnecting the cable from the 'RF in' socket;



3) wait 30 seconds;

4) plug Freeview box (or idTV) mains back in;



5) do a complete scan for channels - it will fail without the aerial. (This may be in the installation or initialization menu, and is distinct from any 'add channels option'). Once this is done your channel line up should be empty;



6) reinsert aerial by reconnecting to the 'RF in' connection;



7) do a complete scan for channels again.



The Freeview channel line-up provided by six "multiplexes" - each of which carry five or more TV channels, radio channels, text services and EPG data. In this diagram each ROW represents a multiplex. If you are still missing a whole multiplex (ie everything on the row) you may need to replace your aerial with a wideband type, purchase a larger aerial or you may have interference from a VCR, games console, Sky Digibox or similar.



All questions
Removing all barriers to communication between diverse cultures1
How do I get a test card with Freeview2
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau3
Can I receive UK TV in Ghana?4
I would like to know if it is possible to receive UK terrestrial Freeview servic5
[][][
In this section
I have now lost all signal can you tell me what the problem might be?1
I have a Durabrand cg5660-m and I need the lock key code!2
What is the Inversion Effect and why does it effect my Freeview TV reception? 3
My ITV/C4 Freeview channels have disappeared - what can I do? Is it my SCART ca4
My high gain aerial can't get all the Freeview channels I expected5
What are the aerial types about? Are they high-gain?6

Comments
Wednesday, 13 April 2011
P
phyllis
6:03 PM

i live on the outskirts of nottingham and have no itv channels. i have followed the instructions on top of this page with no change to channel list, any ideas. thanks

link to this comment
phyllis's 1 post GB
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

6:23 PM

Alastair: Can you provide a full postcode? It's possible you're using the Waltham transmitter - Multiplex 2 has moved to a different frequency. You will need to do a first-time installation, which some boxes call a factory reset or a default setting, because many boxes don't cope with finding services that they already think they know where to find.

On a communal system, it's possible that the frequencies are filtered and amplified separately, a 'channelized' system. In this case, the building manager will need to get the system retuned for the new channel. They will need to do this again in August when Waltham completes.

link to this comment
Mike Dimmick's 2,486 posts GB
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

6:25 PM

Eric: Is the one that's working connected to a longer run of cable from the aerial than the one that isn't?

If so, you probably have slightly too much signal. Try adding an attenuator to the TV that isn't working. Or, if you have a separate amplifier rather than an amplified splitter, try disconnecting that.

link to this comment
Mike Dimmick's 2,486 posts GB
A
Alastair
6:32 PM
Nottingham

NG2 3BE
Yeah I am sorry dunno how I manged to get mixed up, I'm using the East Midlands transmitter according to my TV.

Thanks
Alastair

link to this comment
Alastair's 2 posts GB
K
Kevin Davey
7:05 PM
Newark

Please can someone help, since early hours this morning i have had to retune my tv with freeview and cannot now for some reason get itv, ch4 or ch5 and possibly some others, My post code is NG22 8QP can someone please advise?

link to this comment
Kevin Davey's 1 post GB
F
Fran
8:52 PM

Hi,
Ive lost all my channels. Iv tried unplugging my arial and tv and then restarting it, but its not finding any channels.
I know there was due to be a hange over today, but I was told that I would be fine as I have a tv that recieves freeview. My arial is on the roof. Can anyone offer any help please.

link to this comment
Fran's 1 post GB
Eric
9:53 PM

Mike Dimmick: Well, I'm not sure but I imagine it's the reverse. The TV that works fine is on the second floor very near the aerial while the one that doesn't work is on the ground floor.

I had another thought. The TV that is having the problems also has a DVD player and PS3 plugged into it. The one that is fine has nothing else plugged in. Could that be the cause?

link to this comment
Eric's 4 posts GB
K
KMJ,Derby
sentiment_satisfiedGold

10:10 PM

Kevin Davey: If you are receiving signals from the Waltham transmitter the frequency of Mux2 changed to C31 early this morning.You will need to clear the channel list by doing a factory reset then do a scan to re-store the channels.If this does not find the missing channels try to do a manual tune to C31 noting signal strength and quality. Check you have no VCR, Sky box or games console with the RF modulator tuned around C31.According to the Digital UK postcode checker good reception may also be possible from the Belmont transmitter.Check for duplicate channels in the 800s of the channel list.

link to this comment
KMJ,Derby's 1,811 posts GB
R
Rob Durant
10:18 PM

I live in Milton Keynes, I have lost ITV, CH4, CH5 plus possibly others - I have tried to re-tune this evening and they are still missing? Could someone please help?

link to this comment
Rob Durant's 2 posts GB
R
Rob Durant
10:23 PM

Also, when I look to reset all settings on the TV, it warns me that this should only be done when there are serious issues - is this still safe?

link to this comment
Rob Durant's 2 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.