menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Freeview Light on the Mynydd Pencareg (Carmarthenshire, Wales) transmitter

first published this on - UK Free TV
sa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps52.067,-4.077 or 52°4'2"N 4°4'39"Wsa_postcodeSA48 8ED

 

The symbol shows the location of the Mynydd Pencareg (Carmarthenshire, Wales) transmitter which serves 2,600 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

This transmitter has no current reported problems

The BBC and Digital UK report there are no faults or engineering work on the Mynydd Pencareg (Carmarthenshire, Wales) transmitter.

Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Mynydd Pencareg transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 V max
C41 (634.0MHz)460mDTG-24W
Channel icons
1 BBC One (SD) Wales, 2 BBC Two Wales, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, plus 14 others

PSB2
D3+4
 V max
C44 (658.0MHz)460mDTG-24W
Channel icons
5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 South ads, 18 More4, 26 ITV4, 28 ITVBe, 30 E4 +1, 35 ITV1 +1 (Wales), 71 That’s 60s,

PSB3
BBCB
 V max
C47 (682.0MHz)460mDTG-24W
Channel icons
46 5SELECT, 101 BBC One HD Wales, 102 BBC Two HD Wales, 104 Channel 4 HD South ads, 105 Channel 5 HD, 106 BBC Four HD, 110 Channel 4 HD (Wales), 204 CBBC HD, 205 CBeebies HD, plus 1 others

H/V: aerial position (horizontal or vertical)

Are you trying to watch these 44 Freeview channels?

the effected channels
the effected channels
the effected channels
the effected channels

The Mynydd Pencareg (Carmarthenshire, Wales) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: U&Yesterday, 4seven, 5Action, 5STAR, 5USA, Al Jazeera Eng, Al Jazeera English, Blaze, Blaze +1, Challenge, Channel 5 +1, DMAX, E4 Extra, YAAAS!, Film4 +1, Food Network, FRANCE 24 (in English), GREAT! action, GREAT! christmas, GREAT! movies, GREAT! romance mix, HGTV, HobbyMaker, ITV2 +1, ITV3 +1, ITV4 +1, ITVBe +1, Legend, PBS America, Quest +1, Quest Red, Really, Sky Mix, Sky News, Talking Pictures TV, That's 90s, That's TV 2, Together TV, TRUE CRIME, TRUE CRIME XTRA, U&Dave, U&Dave ja vu, U&Drama +1, U&W.

If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.

Which BBC and ITV regional news can I watch from the Mynydd Pencareg transmitter?

regional news image
BBC Wales Today 1.2m homes 4.7%
from Cardiff CF5 2YQ, 86km southeast (138°)
to BBC Wales region - 206 masts.
regional news image
ITV Cymru Wales 1.2m homes 4.7%
from Cardiff CF5 6XJ, 87km southeast (141°)
to ITV Wales region - 206 masts.

How will the Mynydd Pencareg (Carmarthenshire, Wales) transmission frequencies change over time?

1984-971997-981998-20092009-132013-182013-1731 Oct 2018
C/D EC/D EC/D EC/D EC/D E TC/D E TB E K T
C41BBCA
C44D3+4
C47BBCB
C49tv_off BBCABBCA
C54tv_offC4wavesC4wavesC4wavesBBCBBBCBBBCB
C58tv_offBBC1wavesBBC1wavesBBC1wavesD3+4D3+4D3+4
C61ITVwavesITVwavesITVwavesBBCA
C64BBC2wavesBBC2wavesBBC2waves

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 19 Aug 09 and 16 Sep 09.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-4 120W
BBCA, D3+4, BBCB(-7dB) 24W

Which companies have run the Channel 3 services in the Preseli transmitter area

Sep 1962-Jul 1964Wales (West and North) Television (Teledu Cymru)
Jul 1964-Jul 1968Television Wales and the West
Jul 1968-Feb 2004Harlech Television
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Mynydd Pencareg was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Is the transmitter output the same in all directions?

Radiation patterns withheld

Comments
Wednesday, 31 October 2012
Carol Lovekin
5:13 PM

Te: MYNYDD PENCARREG transmitter - Freeview BBC TV off air since 00:21 today. Any idea how long for?

Cheers

link to this comment
Carol Lovekin's 1 post GB flag
Wednesday, 6 November 2013
G
Georgina Rees
3:10 PM
Aberaeron

My Sky+HD box isn't getting a satellite signal. It comes up as For your Information 25.

link to this comment
Georgina Rees's 1 post GB flag
Georgina's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
J
jb38
sentiment_very_satisfiedPlatinum

8:55 PM

Georgina Rees: This type of problem is frequently caused by either the dish having been moved (blown or knocked) out of alignment or alternatively by water having entered the boxes "F" connector where its connected into the dish.

Should the latter apply then this can be checked by swapping the boxes LNB1 & LNB2 inputs over, if though the situation remains the same then this is inclined to point to a possible dish alignment problem, as even although a "no signal" message may have appeared its not necessarily the case that nothing is being received, as signals under a certain level will trigger this message.

You should carry out a signal check using the following procedure:

Press "Services" on your Sky remote control and you will see the main menu with "Options" being highlighted.

2:- Select the "Settings" menu using the right arrow button and press select.

3:- Use the left / right arrows to scroll to "Signal" and press select, the grey bars displayed will show you the strength of the signal being received, if any! should though anything be indicated then the strength / quality levels of that seen have to be around 50% minimum to produce a picture, this especially so where the quality is concerned which should never be lower than the strength.

By the way error 25 (sometimes 29) and not receiving a signal means exactly the same thing.

Further info dependant on reply, although if all the aforementioned fails then you could try placing the box in standby for 30 secs or so before disconnecting it from the mains, this then followed by reconnecting it again after a further 30 seconds and going through the installation procedure.

In cases like this its always much easier to verify if the dish is OK or not by trying another box on the dish, if a standard box then try each of the two input leads one at a time.

link to this comment
jb38's 7,179 posts GB flag
Wednesday, 18 January 2017
D
DjHolmes
10:53 AM

Hi I am on pencarreg TV mast since last night i have lost channels 3. 4. 5 and a lot of other channels please could you email me to say what the problem is there are other residents in my street having the same problem from the signal thank you. DJHolmes.

link to this comment
DjHolmes's 1 post GB flag
Thursday, 21 July 2022
G
Glyn Hammond
1:50 PM

Not receiving C47 HD services. Using a wideband aerial
replacement for rusted old group C/D. Vertical mounted on outside roof position.
No HD services for last 3 months.
Mynydd Pencarreg mast can be seen from my roof top. C41 & C44 quality 100. Signal strength 51 C41 & 41 C44.
C47 Quality and Signal both 0.

link to this comment
Glyn Hammond's 5 posts GB flag
S
StevensOnln1
sentiment_very_satisfiedPlatinum

2:14 PM

Glyn Hammond: Those signal strength readings look quite low, in general you should be aiming for somewhere in the range of 70% to 90% for reliable reception. C47 is very close to the 700MHz band which is now used for 4G/5G mobile services, so there could potentially be some interference if once of the mobile networks have deployed 700MHz nearby. It might be worth contacting Restore TV (the organisation setup and funded by the mobile networks to resolve 700 & 800MHz interference issues - see link below) who should send out a free plug-in filter if they believe you may be affected. It's also worth checking for any loose or damaged cables or connections which could be contributing to the reduced signal strength.

If you provide a full postcode we can see your predicted reception and may be able to offer further advice.

https://restoretv.uk

link to this comment
StevensOnln1's 3,680 posts GB flag
G
Glyn Hammond
3:26 PM
Aberaeron

StevensOnln1:
Thank you for your quick reply.
Postcode is SA48 7LT

link to this comment
Glyn Hammond's 5 posts GB flag
Glyn's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
S
StevensOnln1
sentiment_very_satisfiedPlatinum

4:39 PM

Glyn Hammond: Although you said that you can see the transmitter from roof height, you are 6km away and the transmitter output is only 24 watts. RestoreTV are not currently predicting any mobile interference at your postcode, although it's worth bearing in mind that this could potentially become an issue in the future. It may be necessary to fit an amplifier to overcome the low signal strength, which should be as close as possible to the aerial (i.e. a masthead amplifier mounted on the aerial pole or in the loft with as short a cable run as possible from the aerial) rather than behind the TV where it would only be able to amplify an already weak signal). It may be worth talking to a reputable local installer who is familiar with the area and can measure the signal strength at the aerial to see how much is being lost in the cable run to your TV.

link to this comment
StevensOnln1's 3,680 posts GB flag
G
Glyn Hammond
5:44 PM

StevensOnln1: Thank you. Yes. I will try to amplify the signal. the signal

link to this comment
Glyn Hammond's 5 posts GB flag
C
Chris.SE
sentiment_very_satisfiedPlatinum

10:48 PM

Glyn Hammond:

Before you rush off to get an amplifier, what is the state of your coax?
How long ago was the aerial replaced? Was the coax replaced at the same time with quality double screened (eg.CT100 standard) coax?

If it's old coax and there's been any ingress of water at anytime, if the outer sheath has become brittle etc. this will all affect the signal at the set. Certain problems can cause "standing waves" in the coax which can be specific to one frequency, and maybe in your case affect C47. Other problems can just cause severe attenuation especially the higher frequencies.

Were you getting the HD multiplex before the aerial was replaced? If so, I'd be having a close look at the coax if it wasn't replaced. If it was, a thorough check of all the connections.

If you've never had the HD multiplex then may interference could be an issue. Check you haven't got any older equipment (eg.VCR's etc) with RF output operating below C47.
I take it you haven't got any splitters for providing signal to more than one device.

Even though a signal strength reading at the set of 51 for C44 seems low, I'm surprised that it's all 0 at C47.

Should it turn out to be a case of needing an amplifier, make sure it's one with a variable gain control. Too much signal can also cause problems, especially if there are any mobile masts nearby. I would be trying to get a filter from restoretv.uk in any event.

link to this comment
Chris.SE's 4,393 posts GB flag
Select more comments
Page 1

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.