Full Freeview on the Bilsdale (North Yorkshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 54.358,-1.151 or 54°21'30"N 1°9'2"W |  | TS9 7JS |
The symbol shows the location of the Bilsdale (North Yorkshire, England) transmitter which serves 570,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Bilsdale (North Yorkshire, England) mast?
Bilsdale transmitter - Bilsdale transmitter: Possible effect on TV reception week commencing 04/11/2024 Pixelation or flickering on some or all channels 
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bilsdale transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bilsdale transmitter?
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 74km north-northwest (336°)
to BBC North East and Cumbria region - 70 masts.
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 75km north-northwest (333°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
| Garsdale (pin Fold) | Transposer | 63 homes (coverage together with SH34) | |
| Hawsker Bottom | Active deflector | 150 caravans | |
| Langthwaite | Active deflector | 30 homes |
How will the Bilsdale (North Yorkshire, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | |||||
| A K T | A K T | A K T | K T | W T | |||||
| C21 | BBCB | ||||||||
| C23 | C4waves | C4waves | C4waves | BBCB | |||||
| C24 | _local | D3+4 | |||||||
| C26 | BBC2waves | BBC2waves | BBC2waves | BBCA | |||||
| C27 | BBCA | ||||||||
| C29 | ITVwaves | ITVwaves | ITVwaves | D3+4 | |||||
| C30 | _local | ||||||||
| C31 | com7 | ||||||||
| C33 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C35 | C5waves | C5waves | |||||||
| C37 | com8 | ||||||||
| C40 | ArqB | ArqB | |||||||
| C43 | SDN | SDN | |||||||
| C46 | ArqA | ArqA | |||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 500kW | |
| BBCA, D3+4, BBCB | (-7dB) 100kW | |
| SDN, ARQA, ARQB | (-10dB) 50kW | |
| com7 | (-14.3dB) 18.5kW | |
| com8 | (-14.4dB) 18.1kW | |
| Mux 2*, Mux A*, Mux B*, Mux C* | (-19.2dB) 6kW | |
| Mux 1* | (-20.2dB) 4.8kW | |
| Mux D* | (-24.9dB) 1.6kW |
Local transmitter maps
Bilsdale Freeview Bilsdale DAB Bilsdale AM/FM Bilsdale TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Bilsdale transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldMonday, 19 November 2012
J
Jacqueline Fowler8:52 PM
Stockton-on-tees
Our ariel is in the loft. My son has a Bravia Sony TV. Before switchover his fave programmes were 'Pick' and 'Dave', now he can get niether. Please can you help. I have read al therough this thread, but little of it makes any sense to me. Could you please help using very simple language! Thank you.
| link to this comment |
Jacqueline's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Jacqueline Fowler: I posted an explanation here in response to Alan:
Bilsdale (North Yorkshire, England) full-Freeview transmitter | ukfree.tv - 10 years of independent, free digital TV advice
A number of other people have reported exactly the same issue.
First off, if your TV has manual tuning you should attempt to tune to the missing multiplex (a multiplex is a single signal that carries multiple services).
Go through to the manual tune function (if there is one) and tune to UHF/RF channel 46. The multiplex on C46 carries Dave, Pick TV and others.
| link to this comment |
Monday, 26 November 2012
S
stu11:25 PM
Saltburn-by-the-sea
i am also from TS13 5HR, lost C46
| link to this comment |
stu's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Thursday, 3 January 2013
M
Mike2:01 PM
I've got a slightly odd one here.
I have an EyeTV connected to my computer, but have great difficulty getting BBCA on C26.
I am using an indoor aerial mounted high on the top floor of my house pointing out of the window.
I have to loop the aerial cable half way round the rom to do this (approx 6 metres).
The strange thing is, since switchover, the signal is so strong that I don't need the aerial plugged in (just the loop of cable) to get a good signal on PSB2!
Channels on all other Muxs are fine.
Checking the signal strength and quality, they seem almost identical for both BBCA and PSB2 using the tuning software for the EyeTV.
Any ideas?
Thanks
| link to this comment |
M
Mike2:08 PM
York
Should have said, I am at YO62 6BA.
| link to this comment |
Mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Friday, 4 January 2013
J
jb3812:05 AM
Mike: Its very difficult for anyone to advise in cases where non-standard receivers are being used as devices such as these can suffer problems outside of the norm for Freeview TV's or boxes and there is nothing to compare them with.
That said, if the signal is as strong as you have reported at 10 miles away from the Bilsdale transmitter, then even although the signal strength on PSB1 might appear as being almost identical to PSB2, in reality this might not necessarily be the case and PSB1 is possibly slightly overloading the tuners input, which if this applies is liable to cause instability to occur in the tuner resulting in the corruption any data that might have been picked up, or indeed maybe even completely blocking reception of the mux as this type of thing can happen with standard Freeview TV's or boxes.
Try a reduced signal test by turning aerial about 10 degrees or so away from Bilsdales bearing of 305 degrees, or maybe even just using with a short length of wire (about 5 feet or so) connected into the aerial socket, you will of course have to carry out a retune as the mux data will not have been stored.
| link to this comment |
M
Mike2:22 PM
Thanks for your response jb38.
I'll keep trying different positions for the aerial and see if what helps.
| link to this comment |
B
bob5:12 PM
I have a DVD Recorder with a Freeview Receiver, Samsung Model DVD-SR150M. Since Switch over I have never been able to retune the DVD Receiver. I follow the manual, but its stuck on Language "Austria" and you can not change it.
Any suggestions ??
| link to this comment |
bob: I put <<samsung dvd-sr150m austria>> into Google and perhaps you should do the same:
Samsung DVD-SR150M | AVForums.com - UK Online
I haven't found an answer, or gone much beyond the above link. However, if you find a solution, or indeed come to the same conclusion as Stevenage Neil on AVForums, then it might be useful to others with the same issue.
| link to this comment |
Saturday, 5 January 2013
B
bob10:42 PM
Thanks Dave, I did Google it myself and emailed Samsung Help Centre. I think the solution is I will not be buying another Samsung
| link to this comment |
Select more comments
Your comment please