Full Freeview on the Bilsdale (North Yorkshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 54.358,-1.151 or 54°21'30"N 1°9'2"W |  | TS9 7JS |
The symbol shows the location of the Bilsdale (North Yorkshire, England) transmitter which serves 570,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Bilsdale (North Yorkshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bilsdale transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bilsdale transmitter?
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 74km north-northwest (336°)
to BBC North East and Cumbria region - 70 masts.
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 75km north-northwest (333°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
| Garsdale (pin Fold) | Transposer | 63 homes (coverage together with SH34) | |
| Hawsker Bottom | Active deflector | 150 caravans | |
| Langthwaite | Active deflector | 30 homes |
How will the Bilsdale (North Yorkshire, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | |||||
| A K T | A K T | A K T | K T | W T | |||||
| C21 | BBCB | ||||||||
| C23 | C4waves | C4waves | C4waves | BBCB | |||||
| C24 | _local | D3+4 | |||||||
| C26 | BBC2waves | BBC2waves | BBC2waves | BBCA | |||||
| C27 | BBCA | ||||||||
| C29 | ITVwaves | ITVwaves | ITVwaves | D3+4 | |||||
| C30 | _local | ||||||||
| C31 | com7 | ||||||||
| C33 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C35 | C5waves | C5waves | |||||||
| C37 | com8 | ||||||||
| C40 | ArqB | ArqB | |||||||
| C43 | SDN | SDN | |||||||
| C46 | ArqA | ArqA | |||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 500kW | |
| BBCA, D3+4, BBCB | (-7dB) 100kW | |
| SDN, ARQA, ARQB | (-10dB) 50kW | |
| com7 | (-14.3dB) 18.5kW | |
| com8 | (-14.4dB) 18.1kW | |
| Mux 2*, Mux A*, Mux B*, Mux C* | (-19.2dB) 6kW | |
| Mux 1* | (-20.2dB) 4.8kW | |
| Mux D* | (-24.9dB) 1.6kW |
Local transmitter maps
Bilsdale Freeview Bilsdale DAB Bilsdale AM/FM Bilsdale TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Bilsdale transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldMonday, 26 September 2011
N
nigel lee10:14 PM
Coventry
I have a Logik LDR1a digibox, which since we went all digital has had an "improved epg". The current one is continuallyupdating, and is most iritating.
How do we get the old format back (it says you can, but when you try it just goes through another 20 min update)?
How doe we contact anyone who nkows what has happened. Note non of or oither digiboxes have had this poroblem. We are in CV5 6DG postcode, on Sutton Coldfield. We have ample (maybe too much ) signal at all the aerial points.
| link to this comment |
nigel's: mapN's Freeview map terrainN's terrain plot wavesN's frequency data N's Freeview Detailed Coverage
Thursday, 29 September 2011
Friday, 21 October 2011
M
Mark Fletcher12:42 AM
Halifax
In the case of Bilsdale after DSO2 from Wednesday 26 September 2012,a group K aerial will give a slightly better performance than the group W wideband aerials.However those in the overlap Bilsdale/Emley Moor area within North Yorkshire such as York city for example who watch both Bilsdale and Emley Moor transmissions on diplexed aerials,should diplex a group K aerial directed towards Bilsdale,and on this occasion a group W wideband aerial directed towards Emley Moor.
| link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Sunday, 6 November 2011
D
Darren1:10 PM
Middlesbrough
On Bilsdale transmitter, post code TS9 6QH. Channels on Cghannel 34 are fine, then become pixellated for a few seconds, and then back to normal Signal strenght is 47%, quality 100%, but during pixellation, these drop to 4% for each. The weather today (the time I've had to look & think about things), is fine & dry with no wind. Any suggestions? Ariel is wideband (I think) DIY fitted a few months ago.
| link to this comment |
Darren's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Monday, 7 November 2011
Darren: Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice might offer you some suggestions, otherwise please see Freeview intermittent interference | ukfree.tv - independent free digital TV advice .
| link to this comment |
Friday, 11 November 2011
M
mike Roberts 1:43 PM
Wigan
I wonder if you can get Bilsdale anywhere in the Northwest of England
| link to this comment |
mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
M
Mark Fletcher3:56 PM
Halifax
mike Roberts.Wigan.From a terrestrial point of view receiving Bilsdale transmissions from both the present analogue and currently lower powered pre-digital signals anywhere within North West England now up to their DSO come September 2012,the answer is yes in the case of analogue but only snowy broadcasts and only in the area you mentioned on the far eastern fringes of North West England,one possible area being east of Clitheroe.In the case of lower powered pre-digital switched signals,the answer most likely is no.However come DSO when analogue and low-power pre-digital signals are eventually turned off for good,is is a possibly that the three 100kw high powered mux's from Bilsdale BBCA,D3+4,BBCB (HD),can be received over a wider area namely around Clitheroe (50kw SDN,ArqA,ArqB mux's maybe ?),and other eastern fringes of North West England,but that possibly is it.
| link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Thursday, 24 November 2011
F
Frank 9:29 AM
Hi, I'm in Harrogate (HG1 4) - my analogue reception has become poor, and the few digital channels I can't get any longer. Has something haoppend to the Bilsdale signal ?
| link to this comment |
Saturday, 26 November 2011
P
Philip Knowles2:17 PM
I have a Philips Freeview Recorder with HD. It seems to think that Bilsdale is now broadcasting in HD and asks me to select SD/HD whenever I change channel. It is extremely annoying. They obviously are not broadcasting HD yet (and won't be for nerarly a year) so why can't they turn off the identifier?
| link to this comment |
Saturday, 10 December 2011
P
Phil4:40 PM
I appear to be still picking up some analogue channels from Bilsdale. I am getting BBC1 Tyne Tees area and other channels. Is this possible?
| link to this comment |
Select more comments
Your comment please