Full Freeview on the Fenton (Stoke-on-Trent, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google map | Bing map | Google Earth | 53.003,-2.146 or 53°0'11"N 2°8'46"W | ST4 2NX |
The symbol shows the location of the Fenton (Stoke-on-Trent, England) transmitter which serves 130,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Fenton (Stoke-on-Trent, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Fenton transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Fenton transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 61km south-southeast (164°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 61km south-southeast (164°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Fenton (Stoke-on-Trent, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
A K T | A K T | A K T | A K T | W T | |||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C22 | +ArqA | ArqA | |||||||
C24 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C25 | SDN | SDN | |||||||
C27 | BBC2waves | BBC2waves | BBC2waves | D3+4 | D3+4 | ||||
C28 | ArqB | ArqB | |||||||
C29 | _local | _local | |||||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | C5waves | C5waves | |||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 10kW | |
BBCA, D3+4, BBCB | (-7dB) 2kW | |
SDN, ARQA, ARQB | (-10dB) 1000W | |
com7, com8 | (-18.5dB) 140W | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-20dB) 100W | |
Mux C*, Mux D* | (-23dB) 50W |
Local transmitter maps
Fenton Freeview Sutton Coldfield TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Thursday, 8 September 2011
Derek Ellerton: True, I should check when I copy and paste from an official document.
link to this comment |
Monday, 12 September 2011
A
Alan Hewitt10:05 AM
Stafford
I have recently done a re scan following the sept 7th switch off.
I was looking at your list of Mux's and they do not agree with what I get when I scan. I get the following mux's: Mux A 482, Mux B 506 Mux C 530, Mux D 562, Mux 1 498, and Mux 2 570.
You list Mux 2 as 545. Am I reading this incorrectly? My Post code is ST5 area
link to this comment |
Alan's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
R
russ11:32 AM
Hi There
Was wondering if the digital signal from Fenton
will increase significantly after 21/09/11.
I'm currently receiving a weak ITV1 signal.
link to this comment |
M
Mike Dimmick11:44 AM
russ: So far only the multiplex containing the BBC SD channels is on its final channel and power level. The other multiplexes will change to their final channels, modes and power levels on 21 September.
The post-switchover power levels are 20x pre-switchover levels, but more to the point are calculated to give equivalent, or slightly better, coverage compared to analogue. (Exception: SDN is 10x Mux A's pre-switchover power - it used to carry a PSB channel, Channel 5, but this moved to Mux 2/D3&4 a couple of years ago.).
link to this comment |
Alan Hewitt: It does say above "D3&4 at Fenton will move to ch33 (100W) in advance of switchover on 20th April 2011. The final frequency, C27, will be adopted at switchover."
link to this comment |
A
Alan Hewitt5:05 PM
Newcastle
Sorry about that was reading from much further up!
link to this comment |
Alan's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
Tuesday, 13 September 2011
Alan Hewitt: Sorry, there are a few transmitters with odd changes that don't fit into the standard template.
link to this comment |
A
Alan Hewitt9:28 AM
Newcastle
Hi Brian what I was referring to was the listing of Mux's just below the distribution map. Mux 2 is listed there as "a digital multiplex transmitted on frequency C30- (545.8MHz)"
I take that this graphic does not show the upto date information for the Fenton Transmitter? but reflect that of July 2010?
link to this comment |
Alan's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
M
Mike Dimmick11:54 AM
Alan Hewitt: It reflects the situation in 2007 before the switchover programme really got going. Brian has put an additional line in for transmitters that had major changes early on - Rowridge, where the line-up changed a lot, and Sheffield, where one mux had to move to squeeze in HD at Emley Moor - but mostly the pre-switchover changes, and any parking channels used after switchover, have not been listed.
link to this comment |
Mike Dimmick/Alan Hewitt: I have to make manual changes to the code to make them display these little extra changes, and the problem is that the rest of the site is data-driven and doesn't see the bit of code that drives these pages, which then makes it inconsistent.
link to this comment |
Select more comments
Your comment please