menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Full Freeview on the Rowridge (Isle Of Wight, England) transmitter

first published this on - UK Free TV
sa_streetviewGoogle Streetviewsa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps50.676,-1.369 or 50°40'35"N 1°22'7"Wsa_postcodePO30 4HT

 

The symbol shows the location of the Rowridge (Isle Of Wight, England) transmitter which serves 620,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

This transmitter has no current reported problems

The BBC and Digital UK report there are no faults or engineering work on the Rowridge (Isle Of Wight, England) transmitter.

Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Rowridge transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 V max
 H max
C24 (498.0MHz)
320mDTG-200,000W
200,000W
Channel icons
1 BBC One (SD) South, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, plus 17 others

PSB2
D3+4
 V max
 H max
C27 (522.0MHz)
320mDTG-200,000W
200,000W
Channel icons
3 ITV 1 (SD) (Meridian (South Coast micro region)), 4 Channel 4 (SD) South ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 South ads, 18 More4, 26 ITV4, 28 ITVBe, 30 E4 +1, 35 ITV1 +1 (Meridian south coast), 71 That’s 60s,

PSB3
BBCB
 V max
 H max
C21+ (474.2MHz)
320mDTG-200,000W
200,000W
Channel icons
46 5SELECT, 101 BBC One HD South, 102 BBC Two HD England, 103 ITV 1 HD (ITV Meridian Southampton), 104 Channel 4 HD South ads, 105 Channel 5 HD, 106 BBC Four HD, 107 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others

COM4
SDN
 H -6dB
 V -6dB
C25 (506.0MHz)
299mDTG-850,000W
50,000W
Channel icons
20 U&Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 38 Channel 5 +1, 41 Legend, 42 GREAT! action, 57 U&Dave ja vu, 58 ITV3 +1, 59 ITV4 +1, 64 Blaze, 67 TRUE CRIME, 68 TRUE CRIME XTRA, 81 Blaze +1, 83 Together TV, 91 WildEarth, 93 ITVBe +1, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, 251 Al Jazeera English, 255 FRANCE 24 (in English), 265 Rok Sky +1, plus 29 others

COM5
ArqA
 H -6dB
 V -6dB
C22+ (482.2MHz)
302mDTG-850,000W
50,000W
Channel icons
11 Sky Mix, 17 Really, 19 U&Dave, 31 E4 Extra, 36 Sky Arts, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 60 U&Drama +1, 65 That's TV 2, 70 Quest +1, 74 &UYesterday +1, 76 That's TV 2 MCR, 233 Sky News, plus 13 others

COM6
ArqB
 H -6dB
 V -6dB
C28 (530.0MHz)
302mDTG-850,000W
50,000W
Channel icons
12 Quest, 25 U&W, 27 U&Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 52 GREAT! christmas, 56 That's TV (UK), 63 GREAT! romance mix, 73 HobbyMaker, 75 That's 90s, 82 Talking Pictures TV, 84 PBS America, 235 Al Jazeera Eng, plus 18 others

LSO
 H -13dB
C37 (602.0MHz)299mDTG-1210,000W
Channel icons
from 22nd December 2014: 7 That's Solent,

DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)

Which BBC and ITV regional news can I watch from the Rowridge transmitter?

regional news image
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 26km north (354°)
to BBC South region - 39 masts.
regional news image
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 24km north-northeast (20°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford

Are there any self-help relays?

Portsmouth DocksTransposer2 km N city centre50 homes Estimate. Group of houses'

How will the Rowridge (Isle Of Wight, England) transmission frequencies change over time?

1950s-80s1984-971997-981998-20122012-132 May 2018
VHFA K TA K TA K TA K TW T
C3BBCtvwaves
C21C4wavesC4wavesC4waves+BBCBBBCB
C22+ArqAArqA
C24BBC2wavesBBC2wavesBBC2wavesBBCABBCA
C25SDNSDN
C27ITVwavesITVwavesITVwavesD3+4D3+4
C28ArqBArqB
C29LSO
C31BBC1wavesBBC1wavesBBC1wavescom7
C37com8
C55tv_offcom7tv_off
C56tv_offCOM8tv_off

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-4 500kW
PSB1||, PSB1≡, PSB2||, PSB2≡, PSB3||, PSB3≡(-4dB) 200kW
COM4≡, COM4||, COM5≡, COM5||, COM6≡, COM6||(-10dB) 50kW
com7≡(-13.1dB) 24.4kW
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D*(-14dB) 20kW
com8≡(-14.3dB) 18.4kW
LSO≡(-17dB) 10kW

Which companies have run the Channel 3 services in the Rowridge transmitter area

Aug 1958-Jan 1992Southern Television
Jan 1982-Dec 1992Television South (TVS)
Jan 1993-Feb 2004Meridian
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Rowridge was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Comments
Tuesday, 24 April 2012
D
Denzil Dexter
8:47 PM
Poole

Thanks very much for the advice Dave. I did as you suggested and switched the aerial to vertical polarisation, removed the amplifier and tried again. Problem is the same, all channels are fine except those on the COM5 multiplexor. The interference happens every 32 seconds, which is really strange.
DD

link to this comment
Denzil Dexter's 3 posts GB flag
Denzil's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Dave Lindsay
sentiment_very_satisfiedPlatinum

8:56 PM

Denzil Dexter: I'm not sure what else to suggest. Perhaps one of the pros will be along soon.

jb38 can you help Denzil?

link to this comment
Dave Lindsay's 5,724 posts GB flag
S
Solent-Viewer
sentiment_satisfiedBronze

10:41 PM

My problems are with all programmes withing COM5 (C22) too, just like Denzil Dexter. I have tried everything and all I get is pixelation and drop-outs since the retune on the 18th. I used to enjoy watching Sky News but now it is impossible. All the other muxes are fine, its just COM5.

link to this comment
Solent-Viewer's 39 posts GB flag
M
Mark Fletcher
sentiment_satisfiedGold

10:52 PM
Halifax

Denzil Dexter,Poole.One possibility of your difficulty in what you mentioned the ArqA/COM5 multiplex on frequency 22 from the main Rowridge transmitter is your first post,you stated your aerial is a group W wideband aerial (tipped black) plus you use a 17db-27db mast head amplifier as without it you lose the channels you stated.

First of all Rowridge transmitter is an all group A mast and the group W wideband aerial you are using is largely of little use on an all group A transmitter within a poor/marginal reception area within Rowridge itself,especially on the lowest frequencies such as what you described earlier in your first post.

Your best remedy at extra cost is to replace your group W wideband aerial and possibly your mast amplifier (retain the latter just in case) and buy a group A Yagi 18A or preferably for slightly extra gain in your location a group A X beam XB16A aerial with black coloured superior copper-copper co-ax cable and importantly brass co-ax plugs.

If you did decide to follow the above then position your new group A aerial (X Beam preferred at your location) if you decided to proceed,vertically.If you still find the gain a wee bit low then try your mast head amplifier as a last resort,however you may find that a new group A X beam aerial with new cable and plug what i described above positioned vertically at your location aimed at Rowridge should do the trick.

One reminder i forgot to add a group A aerial will be tipped red and only group A aerials should be used on an all group A transmitter such as Rowridge itself in a poor/marginal reception area on this mast.
Look up the ATV Sheffield website,they are the UK's No1 aerial retailers,believe me they are the best,forget the rest !

link to this comment
Mark Fletcher's 673 posts GB flag
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Wednesday, 25 April 2012
B
Bill
5:25 PM
Newport

We are on the Rowridge Transmitter and lost Film 4 and others on Channel 28.

The aerial is in the loft with a mast head amplifier ( which was essential with analogue ).

The solution to the problem was to remove the mast head amplifier, the lost channels became available at a stroke when retuning.


link to this comment
Bill's 1 post GB flag
Bill's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
Thursday, 26 April 2012
R
Robin Burnett
12:12 PM
Newport

After fitting a new roof aerial, there are missing channels - ITV3 (Channel 10) no signal and Yesterday (Channel 12) pixelates badly from the Rowridge transmitter. Returned three times with the same result.
Any advice would be appreciated.

link to this comment
Robin Burnett's 2 posts GB flag
Robin's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
Dave Lindsay
sentiment_very_satisfiedPlatinum

1:03 PM

Robin Burnett: At just over a mile from this high power transmitter, your receiver could well be suffering from signal overload problems or at least the higher power (horizontally) Public Service channels acting to make reception of the Commercial ones more problematic.

I am wondering why you have replaced your aerial. The one used for analogue would be expected to work fine as all channels are within Group A.

The situation with Rowridge is that it now transmits horizontally and vertically. The Public Service channels (BBC, ITV1, C4, C5 etc) are 200kW horizontally and vertically and the Commercial ones (those you're having issues with) are 50kW horizontally and 200kW vertically. If you haven't done so, then switch your aerial to vertical.

You really need the smallest aerial you can get. Have a look at:

Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice

With just over a mile, you may well find that a 20dB attenuator isn't enough. Perhaps you will need a high value fixed one (e.g. 24dB) and a variable 20dB one. Connect them inline and adjust the variable one.

One of the issues that is likely occur is that the high power signals will desensitise your receiver to signals that aren't as strong. This is like when your eyes desensitise when exposed to higher levels of light.

Don't get me wrong, at a mile a 50kW signal is very strong!!!

link to this comment
Dave Lindsay's 5,724 posts GB flag
R
Robin Burnett
1:46 PM
Newport

Many thanks Dave for extremely useful advice which I will follow through with the firm who installed the new aerial. They also fitted a booster when they installed 3 lines from the aerial and it appears that this is needed to get any reception. Previously used Sky through a dish but discontinued to transfer to Freeview on switchover.

It could be that the property, whilst only about a mile from the transmitter, is in a valley and the transmitter cannot be seen. Not sure if this is affecting the signal.

I appreciate your help.

link to this comment
Robin Burnett's 2 posts GB flag
Robin's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
Friday, 27 April 2012
B
Bob Norris
12:10 PM

After reading through the problems other people have been having re. Rowridge and pixelation on ITV3,Yesterday etc I did what was suggested and turned my aerial through 90deg. from horizontal to vertical. The picture is now perfect. Thanks for the help.
I am in the SO31 area

link to this comment
Bob Norris's 1 post GB flag
Dave Lindsay
sentiment_very_satisfiedPlatinum

12:31 PM

Robin Burnett: Whilst line-of-sight is of course the best, such a high power transmitter can still be effective (and not require a booster) over the brow of a hill.

It is possible that the signal strength from your aerial into your amplifier is too high for the amp to cope with. This means that all outputs will be distorted and no level of attenuation on the inputs to the TVs will repair this bad signal.

The purpose of the booster is presumably to provide equal signal levels at each aerial socket.

link to this comment
Dave Lindsay's 5,724 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.