Full Freeview on the Whitehawk Hill (Brighton and Hove, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 50.825,-0.113 or 50°49'29"N 0°6'47"W | BN2 5EL |
The symbol shows the location of the Whitehawk Hill (Brighton and Hove, England) transmitter which serves 96,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Whitehawk Hill (Brighton and Hove, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Whitehawk Hill (Brighton and Hove, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Whitehawk Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Whitehawk Hill (Brighton and Hove, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Whitehawk Hill transmitter?
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 43km northeast (36°)
to BBC South East region - 45 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 80km west (274°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Whitehawk Hill (Brighton and Hove, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 16 Oct 2019 | ||||
VHF | C/D E | E | E | C/D E T | W T | ||||
C2 | BBCtvwaves | ||||||||
C34 | ArqA | ||||||||
C35 | C5waves | C5waves | D3+4 | ||||||
C36 | BBCB | ||||||||
C40 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBCB | ||||||||
C53tv_off | C4waves | C4waves | C4waves | D3+4 | |||||
C54tv_off | LBN | ||||||||
C56tv_off | ArqA | ||||||||
C57tv_off | BBC1waves | BBC1waves | BBC1waves | SDN | SDN | ||||
C60tv_off | ITVwaves | ITVwaves | ITVwaves | -BBCA | BBCA | ||||
C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 10kW | |
Analogue 5 | (-3dB) 5kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 4kW | |
Mux B* | (-10dB) 1000W | |
Mux 2*, Mux C*, Mux D*, LBN | (-14dB) 400W | |
Mux 1*, Mux A* | (-17dB) 200W |
Which companies have run the Channel 3 services in the Whitehawk Hill transmitter area
|
|
Wednesday, 21 September 2011
Mikescki: The ones all over Brighton say "IN SIX MONTHS TIME" on them...
link to this comment |
Heavenscentrose: The work will be done when it's done. It is difficult, heavy and complex work which is being done at the top of a mast 172m above sea level.
It's not like replacing a domestic aerial, not even slightly.
The power of the transmitter after switchover will be much higher than for most other main transmitters (-4dB compared to -7dB) so the coverage will be much better than the analogue coverage.
At switchover the transmitter will be off air for about six hours from midnight.
link to this comment |
H
Heavenscentrose10:43 PM
Brighton
Thanks for the info, Brian. I can understand the difficulties of working on such a high mast in an exposed site! I, along with everyone else, will have to be patient and won't rearrange the channels until all is up and running properly again.
It's very reassuring that reception will be better after the digital switchover. I wonder whether we'll be able to receive some of the French digital stations which are at present sometimes available when the weather conditions are right? It will be interesting to see - we may be able to access lots more channels - something to which to look forward.
link to this comment |
Heavenscentrose's: mapH's Freeview map terrainH's terrain plot wavesH's frequency data H's Freeview Detailed Coverage
Heavenscentrose: You should only see French channels when there is a temperature inversion...
It would be best to wait for the work to be completed before doing any rescanning.
Arqiva, the mast owners, will be keen to get the work done with as little disruption to viewers are they possibly can.
link to this comment |
H
Heavenscentrose11:45 PM
Brighton
Hi Brian
Unfortunately, when there is a problem, we have to rescan as we cannot access any channels without doing this. (a message keeps appearing on the screen telling us to rescan). So we have to rescan to be able to view any TV at all. However, as the numbers assigned to the channels are illogical and out of sequence we have to renumber them. Until the problems are sorted, we won't be renumbering! Our TV is very difficult to set up after rescanning so we'll just have to use the EPG to find the channels we want! However, this is a small price to pay to get a better service.
Thanks again.
link to this comment |
Heavenscentrose's: mapH's Freeview map terrainH's terrain plot wavesH's frequency data H's Freeview Detailed Coverage
Heavenscentrose: You might find this method - My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice - less frustrating.
link to this comment |
Thursday, 22 September 2011
Hi Brian
Thanks for the engineering work updates and changing the engineering banner info too. I appreciate you are unable to name a date when the engineering work is complete. Can I ask 2 questions: 1) Will there be a message update on here telling us all engineering work we are experiencing now is completed & if there will be anymore engineering works in the future.
2)While this engineering work is going should I not re-scan the TV for channels but instead leave the TV alone & wait for the channels to come back on. I was just wondering because I am not sure if you have to do a re-scan in order to get all channels again. Sorry for the dumb questions but I am not IT minded at all. Thank you.
link to this comment |
clare McNeil: OK.
1) Usually you just see "no work for this week" and that's it. The air works are unlikely to continue much later into the year - once it gets cold and windy the work is impossible to carry out safely.
2) If you can rescanned whilst the services were off-air, rescan again after 6pm. If you didn't, the services should just reappear in their correct places when the work is done.
link to this comment |
Friday, 23 September 2011
Hi Brian
Thank you for your speedy response I think I won't re-scan as the TV channels did appear again in their right place without me doing a re-scan. I just wasn't sure if I had to keep doing a re-scan after every time the TV channels went down during engineering work.
Thanks for the engineering updates and for your reply. I appreciate this must be a busy time for you in this area.
link to this comment |
Clare's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Saturday, 24 September 2011
P
Peter Smith5:53 PM
Brighton
Apologies for double posting but I think I put this query in an inappropriate place. This one seems more relevant:
I'd like some advice from anyone who understands the modulation techniques and error-correction provided by digital TV.
I'm trying to decide what we should do with the MATV system at Brighton Marina after the DSO next March. With the analogue signals we transpose frequencies (channels) so as not to get RF pickup on any badly shielded drop leads etc and this is normal practice. For the digital channels we currently transpose three of the muxes but not the other three (why? I don't know - it was introduced on a legacy system before I moved here).
My question is: with the high power digital transmitters, should we transpose frequencies to avoid any direct RF pickup clashing with the (slightly delayed) MATV data stream and clobbering the BER? Or is it completely unnecessary with digital transmissions?
The corollary of these questions poses another: does it do any harm to transpose channel frequencies for digital TV? If not, we might as well transpose all six since our head-end equipment is frequency agile. Can I assume that there is nothing RF-specific in the data streams?
I'd be very grateful for any informed opinion or advice.
link to this comment |
Peter's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Select more comments
Your comment please