Full Freeview on the Rowridge (Isle Of Wight, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 50.676,-1.369 or 50°40'35"N 1°22'7"W | PO30 4HT |
The symbol shows the location of the Rowridge (Isle Of Wight, England) transmitter which serves 620,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Rowridge (Isle Of Wight, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Rowridge transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Rowridge transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 26km north (354°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 24km north-northeast (20°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
Are there any self-help relays?
Portsmouth Docks | Transposer | 2 km N city centre | 50 homes Estimate. Group of houses' |
How will the Rowridge (Isle Of Wight, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 2 May 2018 | ||||
VHF | A K T | A K T | A K T | A K T | W T | ||||
C3 | BBCtvwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C22 | +ArqA | ArqA | |||||||
C24 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C25 | SDN | SDN | |||||||
C27 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C28 | ArqB | ArqB | |||||||
C29 | LSO | ||||||||
C31 | BBC1waves | BBC1waves | BBC1waves | com7 | |||||
C37 | com8 | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
PSB1||, PSB1≡, PSB2||, PSB2≡, PSB3||, PSB3≡ | (-4dB) 200kW | |
COM4≡, COM4||, COM5≡, COM5||, COM6≡, COM6|| | (-10dB) 50kW | |
com7≡ | (-13.1dB) 24.4kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-14dB) 20kW | |
com8≡ | (-14.3dB) 18.4kW | |
LSO≡ | (-17dB) 10kW |
Local transmitter maps
Rowridge Freeview Rowridge DAB Rowridge TV region BBC South Meridian (South Coast micro region)Which companies have run the Channel 3 services in the Rowridge transmitter area
|
|
Sunday, 3 June 2012
Terry: Yes, vertical will be better as all signals are the same power vertically.
Horizontally the Commercial multiplexes (which include Film 4) are weaker than the Public Services ones (BBC, ITV1, C4, C5 etc).
link to this comment |
Monday, 4 June 2012
M
Mark Fletcher1:35 AM
Halifax
Terry,Winchester.As Dave Lindsay rightfully states vertical polarisation is the better option.However if i may add is your aerial a group A (coloured red at its tips) type,or a group W wideband (coloured black at its tips) aerial.Group W wideband aerials unless residing in a good/medium reception area on an all group A transmitter perform badly on all group A frequencies,especially more so on an all group A transmitter within Rowridge itself in a poor reception/marginal area.Check the colour tips of your aerial at the same time you realign the polarity from horizontal to vertical,that you are using the right aerial red tipped group A and not the wrong aerial black tipped group W wideband for all group A mast Rowridge in a poor/marginal area itself.
link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Terry, Mark Fletcher: I think even if Terry's aerial is a wideband, that it will work if it has worked before, which it clearly has.
Whilst it is true that the gain of wideband yagi aerials is lower on Group A channels, if it has been proven to work, then I see no reason to replace it.
I think that one of the main issues that Terry and other users of Rowridge have to contend with is the fact that the Commercial multiplexes are only 50kW horizontally whereas they are 200kW vertically (and the Public Service channels are 200kW vertically and horizontally).
So there is a marked difference in strength horizontally and this is probably the biggest issue.
link to this comment |
T
Terry3:28 PM
I'll give it a go.
I'll also check alignment with a Maplin A55HJ Aerial Signal Strength Meter which I have
link to this comment |
T
Terry5:34 PM
I'm back
Firstly the aerial.
No coloured tips. All plastic mounts are black and brittle!!!!!!
Turned the elements vertical and tested.
Got occasional flickers on the 70dB led.
Hooked up TV lead and checked TV. Best signal quality I've ever had on Film4 and Really, which have always been pretty weak.
Picture ok for now but I think that a new aerial is on the cardsTerry
link to this comment |
Terry: If you have a booster, then try removing it. Keep the aerial vertical as that is definately the best for Rowridge.
link to this comment |
Terry: If you do decide to get another aerial, you might like to take a look at Rowridge Transmitter
link to this comment |
Tuesday, 5 June 2012
M
Mark Fletcher5:47 AM
Halifax
Terry,Winchester.The aerial you stated appears to be an inferior group W wideband contract aerial.If you decide that a new aerial is on the cards then replace with a superior group A (red coloured tips) antenna,preferably at your location a Yagi 18A polarised vertically,with at the same time new superior copper-copper black coloured co-ax cable and importantly superior brass co-ax aerial plug.I would strongly recommend looking up the ATV (Aerials and Television) of Sheffield website,believe me they are the No1 UK aerial accessories retailer and the best,forget the rest.
link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Friday, 8 June 2012
R
Ray8:43 AM
Andover
Dave Lindsay: something you mentioned at the time when I asked for help:
interference from other transmitters: it is worth checking that the right channels are being selected. One of my freeview sets needed to be tuned manually.
link to this comment |
Ray's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
Ray: Yes, sometimes the automatic tuning procedure can leave the wrong transmitter tuned in.
Hannington and maybe Midhurst look as though they may be possibilities for you. Perhaps swapping to vertical polarisation would also reduce the likelihood of that happening as they are horizontal only.
Looking at the channel allocations for these transmitters, you should be able to unplug the aerial lead at 30% so as to scan Rowridge's channels and avoid those of Hannington and Midhurst.
link to this comment |
Select more comments
Your comment please