Full Freeview on the Midhurst (West Sussex, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.017,-0.701 or 51°1'2"N 0°42'4"W | GU28 9EA |
The symbol shows the location of the Midhurst (West Sussex, England) transmitter which serves 94,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Midhurst (West Sussex, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Midhurst (West Sussex, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Midhurst transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Midhurst (West Sussex, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Midhurst transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 51km west-southwest (256°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 41km west-southwest (248°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Midhurst (West Sussex, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 2013-18 | 2013-17 | 16 Oct 2019 | |||
C/D E | C/D E | C/D E | C/D E | C/D E T | C/D E T | K T | |||
C29 | SDN | ||||||||
C33 | ArqB | ||||||||
C34 | ArqA | ||||||||
C35 | D3+4 | ||||||||
C36 | BBCB | ||||||||
C48 | BBCA | ||||||||
C50tv_off | ArqB | ArqB | ArqB | ||||||
C54tv_off | SDN | SDN | |||||||
C55tv_off | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | BBCA | |||
C56tv_off | D3+4 | D3+4 | |||||||
C58tv_off | ITVwaves | ITVwaves | ITVwaves | BBCB | BBCB | BBCB | |||
C59tv_off | ArqA | ArqA | ArqA | ||||||
C61 | BBC1waves | BBC1waves | BBC1waves | D3+4 | |||||
C62 | SDN | ||||||||
C68 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 29 Feb 12 and 14 Mar 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 100kW | |
BBCA, D3+4, BBCB | (-7dB) 20kW | |
SDN, ARQA, ARQB | (-10dB) 10kW | |
Mux C* | (-16dB) 2.5kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-17dB) 2kW | |
Mux D* | (-20dB) 1000W |
Which companies have run the Channel 3 services in the Midhurst transmitter area
|
|
Saturday, 28 July 2012
MIKE HAMPTON
Hi Mike, the key things to take into concideration are
1. how old is your system
- external aerials have a lifespan of about 20 years
2. how good are the connections on the system
3. Is the aerial suitable for your location
4. how (clean) is the signal you are receiving
As you have only recently moved into the area you do not know the history of the system and cannot confirm if it has worked well recently.
The best thing to do is have a system test done which will identify any issues you may have.
I am a Digital Approved Installer who covers the liss area.
regards
Jamie
Jays Cabling Services
link to this comment |
jamie's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Monday, 6 August 2012
P
Phil5:00 PM
Liss
Mike Hampton:
Hi Mike Ive lived in Liss since the 80s and the signal has always been dire. You have a choice of 3 transmitters depending on which road you are in. I point to Midhurst and into trees and a hillside. Some are on Isle of Wight and some I believe on Hannington. I have trouble with SDN channels sometimes because I believe there is a clash with Oxford transmitter which is also using CH62. Having said that I do now receive a reasonable service subject to a few glitches on all channels. Best check which direction your aerial is facing and work out which transmmitter you are on.
link to this comment |
Phil's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
P
Phil5:04 PM
Liss
Mike Hampton:
PS Should have mentioned I have an aerial on the highest point of the roof with a masthead amplifier also a distribution amp in the house taking the signal to various rooms.
link to this comment |
Phil's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Saturday, 11 August 2012
General advice for you all.
The location of the aerial is key to good reception.
Not specifically being at the highest point.
You could actually have the aerial lower on the building, but 2 foot to the right.
This could make all the difference.
You should test the reception at different parts of the building before deciding to mount it onto your home.
If you cannot acheive the minimum signal levels required, then dont bother to fit it as you will always have issues.
Once you have acheived the signal needed, you must only fit an amplifier to the system if the amount of connections you are adding to the system subsequently makes your signal drop below the minimum requirement.
link to this comment |
jamie's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Monday, 20 August 2012
Some program's not recording lately & I'm wondering whether the Humax PVR-9200T is past it or are they messing with the program indents they're beaming out. Any ideas? I'd hate to have to buy a new box just now.
link to this comment |
M
Mark Fletcher6:24 PM
Barnsley
Stuart.Probably the latter of what you stated,messing with the program indents they're beaming out.Highly unlikely that a reputable brand like Humax should suffer occasional faults.No need for now at least to purchase a new replacement unless it is faulty (yer box that is) and Humax boxes rarely have faults.Technika on the other hand is the complete opposite and if i were you if you did replace the Humax (if faulty) dont purchase Technika boxes,avoid them at all costs as the majority of them are dodgy.
link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Wednesday, 22 August 2012
STUART.
If you can view programs correctly on your box and only have issues when recording, then your box is probably to blame.
Anything electrical can develop a fault at anytime in its life, it doesnt matter how good a brand it is.
Saying that, HUMAX is the best you can get.
Recorder units tend to have issues the older they get, with you constantly recording and deleting recordings, the drive tends to develop issues, a little bit like a computer does with age.
link to this comment |
Jamie's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Monday, 24 September 2012
Stuart
6:08 PM
6:08 PM
Mark & Jamie - cheers chaps! I've re-tuned & not had the problem since so who knows what it was? I will format the drive soon to perhaps clean that up a little. Incidentally, I can't do automatic re-tunes now as I get two lots of a certain Mux - the BBC Mux. Must be from another close by area lol. I use Humax as I once worked for Philips & Humax use their tuners. They are by far the most sensitive & best in the business in my opinion.
link to this comment |
Wednesday, 3 October 2012
C
Charlie9:55 AM
I have poor signal on my tv noticed it last night. Wonder if anyone knows whats going on. Or when signal be back to normal
link to this comment |
There was a retune event last night. PSB2 moved from C61 to C56 and COM4 moved from C62 to C54.
link to this comment |
Select more comments
Your comment please