Full Freeview on the Sutton Coldfield (Birmingham, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.600,-1.835 or 52°36'1"N 1°50'5"W |  | B75 5JJ |
The symbol shows the location of the Sutton Coldfield (Birmingham, England) transmitter which serves 1,870,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sutton Coldfield (Birmingham, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sutton Coldfield transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sutton Coldfield transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 15km south-southwest (200°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 15km south-southwest (201°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
Are there any self-help relays?
| Burton (shobnall) | Transposer | 1 km W Burton-on-Trent | 60 homes |
| Coalville | Transposer | 18 km NW Leicester | 600 homes |
| Solihull | Transposer | Land Rover building | 400 homes |
How will the Sutton Coldfield (Birmingham, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | ||||
| VHF | B E T | B E T | B E T | B E K T | W T | ||||
| C4 | BBCtvwaves | ||||||||
| C33 | com7 | ||||||||
| C35 | com8 | ||||||||
| C36 | LOCAL2 | ||||||||
| C39 | +ArqB | ArqB | |||||||
| C40 | BBC2waves | BBC2waves | BBC2waves | +BBCB | BBCB | ||||
| C42 | SDN | SDN | |||||||
| C43 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C45 | ArqA | ArqA | |||||||
| C46 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C48 | _local | ||||||||
| C50tv_off | C4waves | C4waves | C4waves | ||||||
| C51tv_off | LB | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 200kW | |
| com7 | (-10.5dB) 89.2kW | |
| com8 | (-10.7dB) 86kW | |
| LB | (-20dB) 10kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-21dB) 8kW |
Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Tuesday, 8 October 2013
M
MikeB10:20 PM
John: Please please give us a postcode to work with - there could be lots of reasons for your problem, but without a postcode its difficult to pinpoint them.
| link to this comment |
J
john10:41 PM
I have also just been reading on here high pressure can cause problems as well
| link to this comment |
Wednesday, 9 October 2013
J
john8:12 PM
Hi mike b its john here from last night I still have reception problems tonight but I'm now also getting it off the BBC channels now I sent you my post code last night but still not heard from you yet I do believe Sutton cold field have finished engineering works now so I don't no what the problem is any ideas thanx
| link to this comment |
M
MikeB8:38 PM
john: OK - Looking at the terrain plot, you should be fine for either transmitter (although there is a tiny something possible sticking up very close to you from Suttons path), and looking at Streetview (taking a page out of Dave Lindsay's investigative book), your right that pretty much everyone does point to Waltham.
My gut feeling is that you have the normal problem of too much signal strength - the signal is popping and spluttering. Your 48km from Sutton, but its a really powerful transmitter and even at that distance, it can be a problem. Check signal strength on both the TV and the Humax, and then take the booster out of the circuit if you can, and look again. 75% is perfect, but you can live with higher.
Humax tuners are really sensitive, although Samsungs dont like high signal strength either, but obviously its just enough for the Humax to complain.
Let us know what happens.
| link to this comment |
J
john10:19 PM
My humax recorder was about 76% signal strength and my Samsung TV at 100% but with bit error rate at 2000 right across in the red now I have just changed my aerial cable that comes from the booster to the humax its a lot thicker cable and ITV 4 5 and all others on that frequency seem to be OK at the most with the signal strength on both to be between 38% to 40% is that high enough please let us no than for your help
| link to this comment |
M
MikeB10:38 PM
john: Just try bypassing the booster entirely - although if your signal strength has gone down to 40% just by changing the cable, something strange is going on.
| link to this comment |
Thursday, 10 October 2013
J
john7:20 AM
Hi again mike right my signal went back to 100% after changing that cable last night now I have taken your advice and bypassed the booster so the aerial no goes straight in to the back of the humax but the signal is now only 35% or there about HD is about 30% through the humax instead of 75% with booster and tele is between 68% to 74% picture is now fine but my humax instructions say you at leat near 30% for stable sound and picture when its foggy or snowing misty etc will my sinal drop even more in the humax hence problems with signal again and I'm in a poor signal area hence that's why I had booster what do you think please let me no cheers guys
| link to this comment |
J
john7:09 PM
So like I said earlier my TV is still OK so the signal has gone from100% signal to around 68% to 74% and the humax from 75% to 36% since I have bypassed the booster just hope my humax records my programmed later if not I found a old booster with variable signal strength on it what do you think because of the signal difference between the humax and tele cheers
| link to this comment |
M
MikeB7:23 PM
john: I think you have several possible issues, but they are all a bit mixed up, not helped by a possibly duff cable. Try to break everything down, so you can isolate the problem.
I'm not sure your in a 'poor signal area' - the TV signal strength is fine (74% is great). In fact you might have too much signal, or even be catching Walthams signal.
OK - start with the seperate bits. Presumably, your original setup was socket, booster, Humax and then TV, which involves three aerial leads. Thats a chain which has a lot of links, and therefore most prone to problems.
Start by testing the leads, one at a time, going from the socket to the back of the TV. If all of them show a good signal strength, great, but I'm wondering about the 'thick cable' you used. Do the same thing with the Humax - straight from the socket, and note signal strength.
Ok - assuming the TV is fine with an aerial cable, look to see what transmitter your actually tuned into - Sutton is 43, Waltham is 49. Do the same with the Humax - are they on the same transmitter?
By this point, you should start to see what the problem is. Hopefully, its simply that the Humax just has a problem with the cable, or that its tuned into Waltham, and that signal is being caught by the aerial, but not strong enough. Your last post said that the TV was fine without the booster, but the Humax struggled. If changing the cable (or tuning to another transmitter) has not solved the problem, then my best suggestion is to get a decent splitter (and another decent aerial lead if poss.) Split the signal so that one goes straight into the back of the TV, and the other goes via the booster to the Humax. At least you'll get a decent signal on both, even if its less elegant than before.
I split my signal because its easier to sort out any problems (and my PVR hated being looped through for a while) - if you have a lead coming from the wall, and then splitting from there (like a 'Y'), there is less weight on the socket. Not elegant, but workable.
Hopefully, you can get it sorted, but if not, tell us anyway whats happening.
| link to this comment |
Select more comments
Your comment please