Full Freeview on the Kilvey Hill (Swansea, Wales) transmitter
Brian Butterworth first published this on - UK Free TV
Google map | Bing map | Google Earth | 51.629,-3.920 or 51°37'45"N 3°55'12"W | SA1 7BL |
The symbol shows the location of the Kilvey Hill (Swansea, Wales) transmitter which serves 120,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Kilvey Hill (Swansea, Wales) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Kilvey Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Kilvey Hill (Swansea, Wales) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Kilvey Hill transmitter?
BBC Wales Today 1.2m homes 4.7%
from Cardiff CF5 2YQ, 50km east-southeast (108°)
to BBC Wales region - 206 masts.
ITV Cymru Wales 1.2m homes 4.7%
from Cardiff CF5 6XJ, 49km east-southeast (113°)
to ITV Wales region - 206 masts.
Are there any self-help relays?
New Inn C/p | Transposer | 8 km NE Tenby | 1 homes 100 caravans |
How will the Kilvey Hill (Swansea, Wales) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2009 | 2009-13 | 17 Jul 2019 | ||||
VHF | A K T | A K T | A K T | A K T | A K T | ||||
C2 | BBCtvwaves | ||||||||
C21 | BBCA | ||||||||
C22 | ArqA | ArqA | |||||||
C23 | ITVwaves | ITVwaves | ITVwaves | BBCA | |||||
C24 | D3+4 | ||||||||
C25 | SDN | SDN | |||||||
C26 | BBC2waves | BBC2waves | BBC2waves | D3+4 | |||||
C27 | BBCB | ||||||||
C28 | ArqB | ArqB | |||||||
C29 | C4waves | C4waves | C4waves | BBCB | |||||
C30 | _local | ||||||||
C33 | BBC1waves | BBC1waves | BBC1waves | ||||||
C34 | _local | ||||||||
C35 | C5waves | C5waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Aug 09 and 9 Sep 09.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 10kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 2kW | |
Mux 1*, Mux 2*, Mux B* | (-12.2dB) 600W | |
Mux A* | (-15.2dB) 300W | |
Mux C*, Mux D* | (-20dB) 100W |
Which companies have run the Channel 3 services in the Kilvey Hill transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldMonday, 22 July 2019
C
Chris.SE8:43 PM
regis:
Which channels are you missing? Also is the aerial rods (or x's) vertical or horizontal? And which way is it pointing (roughly) ie. N or SW or whatever?
link to this comment |
C
Chris.SE8:51 PM
Preece J:
John best to have a read Freeview modes - a simplified explanation | free and easy
If you look at the predicted reception for your postcode at Digital UK - Coverage checker and then hover your mouse over each UHF channel number, it will provide details.
link to this comment |
N
nobody10:00 PM
Preece J: There is a trade-off between available capacity and the amount of error correction.
The more error correction there is, the easier it is to get the multiplex without error, but at the cost of available capacity.
The PSBs, BBCA and D3&4, have 1/3 of the transmitted data devoted to error correction, leaving 2/3 for actual services.
The COMs ARQA, ARQB and SDN have 1/4 of the transmitted data devoted to error correction, leaving 3/4 for actual services.
So, for example, BBCA has an available capacity of 24 Mbps (Mega bits per second) while SDN has 27 Mbps.
link to this comment |
M
Michael 10:36 PM
Spanner + works : you get my drift... The prediction sites are not infallible. They cannot include very local factors, such as buildings, hills, estuaries etc. What they tell me I should receive, I don't, or unsatisfactorily. What they don't list is what I receive :-) Noting down postcodes further away and inserting them into the prediction boxes can result in interesting alternative predictions - and channels worth trying. Where more than one transmitter is in range, auto-tuning can be tortuous. Manual tuning is preferable, but in many receivers well hidden and not user-friendly. Conspiration theorists claim NASA didn't land on the moon; others claim the inimical DTT system intends to prepare us for TV by subscription via 5G. Must all be rubbish, surely???
link to this comment |
Friday, 16 August 2019
S
StevensOnln16:19 PM
Kathryn: It is being reported elsewhere that due to a technical fault, BBC One is unable to broadcast Wales Today. They seem to have decided to replace it with Newsline from BBC One Northern Ireland, rather than the red screen or BBC News channel. This is not a transmitter or equipment fault, do not attempt to retune.
link to this comment |
Thursday, 10 October 2019
A
amanda lewis3:39 PM
Swansea
hello we have had irregular signal since the retune dates in july. sometimes the bbc channels work. othertimes they are scrambled. beginning to wonder if it is ever going to be back to the way it was. did speak to someone previously about this they said at the time the transmitter was at fault and to wait postcode is sa8 3jh. wigfafarm house. thanks
link to this comment |
amanda's: ...
C
Chris.SE6:40 PM
amanda lewis:
Hmm. Putting your postcode into the DigitakUK checker About us | Freeview shows that predicted reception from Kilvey Hill at your location is likely to be variable to poor! (Try it yourself).
Are you able to receive the COMs 4/5 & 6 multiplexes from Kilvey Hill, or could you get them before the retune event?
See Channel listings | Freeview for the channels on those multiplexes if you aren't sure.
The strange thing is that you are 2km from the Pontardawe transmitter which is line-of-sight but there's no predicted coverage from it according to DigitalUK !! But it's not radiating much signal in your direction, and it was off-air briefly this morning.
I'm wondering if when you retuned, you ended up tuned to the wrong UHF channels which won't help.
You need to enter your TV's tuning section and see which UHF channels you are actually tuned to.
For Kilvey Hill it's 21, 24, 27, for the PSB1/BBCA, PSB2/D3&4, PSB3/BBCB HD multiplexes and 25, 22, & 28 for the COMs 4,5 & 6 multiplexes.
For Pontardawe its 33, 36, 48 only as it doesn't have the COM muxes.
(Note aerial rods should be vertical for these two transmitters).
Kilvey Hill will give you the best choice for the Welsh region IF you can get the COM muxes. Otherwise predicted reception from Carmel is better (for the Welsh region) for the 3 PSB muxes (although the aerial rods need to be horizontal). You probably wouldn't get the COMs from Carmel because of interference from Pontardawe which uses the same UHF channels !!
It may pay you to get someone who is very familiar with reception in your area to look at you aerial installation to see which transmitter may give you the most stable reception.
Otherwise the other possible option is to consider going Freesat - a lot of modern TVs have built-in Sat tuners so you only need a Dish and LNB.
link to this comment |
Friday, 22 November 2019
A
Alun Short4:55 PM
I am using a aerial for signal to my dtv , I have tried to retune my tv but am getting a no signal from my uhf antenna , individual aerials are working on all my others TVs ?
link to this comment |
Saturday, 23 November 2019
C
Chris.SE12:01 AM
Alun Short:
Could you please be a bit more precise about your installation? I'm getting the impression that you have several TVs with each TV having its own aerial. On the other hand you may have one aerial with a splitter (maybe combined with a booster) giving a separate output for each TV.
Does another TV work OK plugged in the place of the TV you are having problems with?
Does the TV you are having problems with work in one of the other places where another TV works?
link to this comment |
Select more comments
Your comment please