Full Freeview on the Bilsdale (North Yorkshire, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 54.358,-1.151 or 54°21'30"N 1°9'2"W | TS9 7JS |
The symbol shows the location of the Bilsdale (North Yorkshire, England) transmitter which serves 570,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Bilsdale (North Yorkshire, England) mast?
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bilsdale transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bilsdale transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-look-north-newcastle.jpg)
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 74km north-northwest (336°)
to BBC North East and Cumbria region - 70 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-tynetees.jpg)
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 75km north-northwest (333°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
Garsdale (pin Fold) | Transposer | 63 homes (coverage together with SH34) | |
Hawsker Bottom | Active deflector | 150 caravans | |
Langthwaite | Active deflector | 30 homes |
How will the Bilsdale (North Yorkshire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | |||||
A K T | A K T | A K T | K T | W T | |||||
C21 | BBCB | ||||||||
C23 | C4waves | C4waves | C4waves | BBCB | |||||
C24 | _local | D3+4 | |||||||
C26 | BBC2waves | BBC2waves | BBC2waves | BBCA | |||||
C27 | BBCA | ||||||||
C29 | ITVwaves | ITVwaves | ITVwaves | D3+4 | |||||
C30 | _local | ||||||||
C31 | com7 | ||||||||
C33 | BBC1waves | BBC1waves | BBC1waves | ||||||
C35 | C5waves | C5waves | |||||||
C37 | com8 | ||||||||
C40 | ArqB | ArqB | |||||||
C43 | SDN | SDN | |||||||
C46 | ArqA | ArqA | |||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
com7 | (-14.3dB) 18.5kW | |
com8 | (-14.4dB) 18.1kW | |
Mux 2*, Mux A*, Mux B*, Mux C* | (-19.2dB) 6kW | |
Mux 1* | (-20.2dB) 4.8kW | |
Mux D* | (-24.9dB) 1.6kW |
Local transmitter maps
Bilsdale Freeview Bilsdale DAB Bilsdale TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Bilsdale transmitter area
|
|
Is the transmitter output the same in all directions?
Radiation patterns withheldThursday, 10 January 2013
J
Jon11:35 AM
Bedale
Bizarrely I can acutally receive the ITV mux from the local relay as well on channel 39 (even though the aerial is the wrong polarisation and groupA) although the signal is less than from bilsdale. No signal on the other frequencies though.
Guess this is due to the groupA aerials gain curve again, but now I have 2 copies of the ITV channels and nothing else from an aerial setup that should not get anything.
link to this comment |
Jon's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Jon: Digital reception is pretty much an "all or nothing" system. So either the picture is "perfect" or "nothing".
I believe that the PSBs are radiated from a single antenna array.
The reason for the differences in reception is due to other variables. Different frequencies get reflected and refracted to differing degrees due to adjacent objects. Aerials, broadcasting and receiving, spread and are sensitive to frequencies to differing degrees.
The gain of an aerial is simply at the expense of greater "loss" in other directions. The less gain you have the less directional it is.
As you've seen, yagi aerials' gain curves slope downwards on lower channels. The size of the reflector on the rear is important as the lower the frequency the longer the wavelength and hence the longer the reflector needed to achieve the same level of "reflection" and hence directivity. Hence, because the reflector is the same length, the gain must be less. (Other factors may also play a part in causing this slope; I'm just considering the effects of the reflector.)
Bill Wright, a great authority on aerials, talks about "short reflector syndrome":
http://www.wrightsaerials….pdf
If you are looking at new aerial, then have a look at ATV's site for information: A.T.V (Aerials And Television) TV Aerial, DAB Aerial, FM Aerial.
If you try to achieve the full complement of channels from Bilsdale, then a Group K aerial is the best single aerial to use. Or, alternatively, a Group A aerial diplexed with a Group B one with a diplexer that "splits" at C38.
Unfortunately, "if" you find that you can receive COM channels from Bilsdale with a Gruop B aerial you will be unable to combine this with an aerial on the West Relay (for PSBs) because it also uses interleaved Group B channels. Therefore, in such circumstances you would have to receive Bilsdale's PSBs, although, as I've said, the COMs are inferior to the PSBs, so if the former are possible, then common sense suggests that the latter will be.
If you were to purchase only a Group B aerial for reception of Bilsdale's COMs and it didn't work, then you may be able to use it for reception of West Runton's PSBs. If you find that you can pull in the COMs, then you could add a Group A aerial.
link to this comment |
Jon: If you are conversant with going up on the roof safely, then you may find that reorientating the aerial(s) (and switching them to vertical) will work on the relay. Perhaps this will be until you get a more suitable aerial, but will provide reception until then.
It might be worth replacing the cable with double-screened coax typically used for satellite installations where the higher frequencies necessitate it:
Satellite, Television, FM, DAB, Aerial, Coaxial Cable, Plugs, Sockets, Connectors & Leads
If you do sucessfully receive from Bilsdale, then a mast-head amp to boost the signals might be necessary.
link to this comment |
Jon: Of course, a Group K aerial would also be suitable for the local relay. So if you tried it on Bilsdale and it won't pull in the COMs, then you could switch it to the relay instead.
link to this comment |
Jon: I'm not a professional and don't have any formal qualifications in this subject.
See also my posting to M S Hahn on aerials' acceptance angles which are narrower the higher the gain:
Freeview retune day - how was it for you? | About UK Free TV | ukfree.tv - 10 years of independent, free digital TV advice
Therefore, there is a trade off and higher gain might not be what you want as you don;t have a "beam" to point your aerial at because the terrain does not allow. You are trying to receive what is being refracted over the brow.
A professional on here has commented that a lower gain log periodic aerial used in conjunction with an amplifier may yield better results.
As I say, I'm not a professional, so it might be worth seeing what others on here say before buying an aerial.
link to this comment |
Thursday, 28 February 2013
A
Andrew9:44 PM
I have a cottage in Whitby near Baxtergate and at the moment we receive just a few freeview channels from the Whitby Transmitter. I wonder if I would be able to receive the full complement of channels from the Bilsdale transmitter If I were to fit an antenna with high gain (quoted for use in fringe areas) and also a mast head amplifier. Is it a case of try it and see or will it definitely not work?
link to this comment |
Friday, 1 March 2013
J
jb388:15 AM
Andrew: Based on having knowledge of the Whitby area I would say that there is almost no chance of you receiving a signal from the Bilsdale transmitter anywhere around the Baxtergate level, as indeed neither can many locations somewhat higher up as you climb out of the valley and with any signal that might be received being totally erratic.
The other aspect that makes the situation worse is that Bilsdales PSB channels transmit on twice the power of the commercials, and the erratic reception I refer to is when on the PSB channels.
link to this comment |
Wednesday, 20 March 2013
B
Beverley10:29 AM
Guisborough
I have my aerial on the single storey roof. The tv is full hd and the quality is superb. However, I now realise that we will not get all the channels available. ie ITV3 and film 4 but can get gay rabbit!! style channels - seems crazy. Can I put up another aerial pointing to Bilsdale and so possibly get the other channels, although I read that reception will not be as good? I live in Guisborough
link to this comment |
Beverley's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
Beverley: Maybe.
The difficulty may be that the high-ground at Newton Moor has trees. This would be the crown over which you would be receiving the signal. This may or may not prove an issue and its effect may or may not be seasonal.
I suggest that you consult a professional aerial installer for an opinion as to how successful it might be.
link to this comment |
Monday, 29 April 2013
S
steve8:18 PM
i have a caravan on the cliff tops just to the south of whitby abbey [stoop cross]. at the moment i have a circular status caravan aerial which is giving me a lot of breakup. question can i use an ordinary tv aerial and tune in to either bilsdale or scarborough, which will give me more channels. and how many elements would the aerial need to be.please help.
link to this comment |
Select more comments
Your comment please