Full Freeview on the Bluebell Hill (Medway, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.324,0.520 or 51°19'25"N 0°31'13"E | ME5 9RD |
The symbol shows the location of the Bluebell Hill (Medway, England) transmitter which serves 200,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Bluebell Hill (Medway, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bluebell Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bluebell Hill transmitter?
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 28km southwest (218°)
to BBC South East region - 45 masts.
ITV Meridian News 0.7m homes 2.7%
from Maidstone ME14 5NZ, 5km south-southeast (155°)
to ITV Meridian (East) region - 36 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Bluebell Hill (Medway, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 19 Jul 2018 | |||||
E | E | E | W T | W T | |||||
C21 | _local | ||||||||
C28 | _local | ||||||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C39 | +ArqA | ||||||||
C40 | BBC1waves | BBC1waves | BBC1waves | +BBCB | SDN | ||||
C43 | ITVwaves | ITVwaves | ITVwaves | D3+4 | ArqA | ||||
C45 | SDN | BBCB | |||||||
C46 | BBC2waves | BBC2waves | BBC2waves | BBCA | ArqB | ||||
C54tv_off | ArqB | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off | ||||||||
C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 13 Jun 12 and 27 Jun 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 30kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-1.8dB) 20kW | |
com8 | (-7.8dB) 5kW | |
com7 | (-8.1dB) 4.7kW | |
Mux 1*, Mux B*, Mux C*, Mux D* | (-10dB) 3kW | |
Mux 2*, Mux A* | (-11.8dB) 2kW |
Local transmitter maps
Bluebell Hill Freeview Bluebell Hill DAB Bluebell Hill TV region BBC South East Meridian (East micro region)Which companies have run the Channel 3 services in the Bluebell Hill transmitter area
|
|
Sunday, 22 January 2012
Ken Collyer: You will not have the issue again when Crystal Palace switches over in April unless you retune. As there is no change in services from Bluebell Hill, then you should leave your sets as they are.
Once Bluebell Hill has switched, you might have an issue, although with all transmitters on high power (including the one you want), you might get away with it.
After Bluebell switchover, if you do pick up Crystal Palace, you can avoid this by having your aerial lead unplugged for the first 25% of the scan.
Sudbury/Rouncefell isn't so easy to avoid if it causes problems because the channels used are inbetween those used by Bluebell. Let's hope that doesn't happen!
link to this comment |
John Buchanan: I don't know how these things work. It might depend on your receiver. Perhaps the message appears not as a result of the channel you are watching, but as a result of those you have stored in your receiver's memory.
To avoid picking up Crystal Palace, do an automatic tuning scan with the aerial unplugged for the first 30%.
Then you will need to add Ch24 D3&4 (ITV1/C4 etc) from Bluebell and Ch27 Mux A (ITV3 etc) from Bluebell.
link to this comment |
Wednesday, 25 January 2012
I am seeing these popups on my Sony Bravia KDL-32CX523 Freeview HD smart TV.
I think it retunes automatically all the time of its own volition.
It has a setting "Digital Auto Service Update" which is currently set to ON. The help page tells me this "detects and stores new digital services as they become available".
I can put up with being told about the Crystal Palace switchover, I know it doesn't affect me. I just wonder who else, less knowledgable, is getting this misleading rubbish and will retune on April 4, even though they are not required to, and it shoudld not make any difference.
Will we then start getting popups to tell us to retune in June?
link to this comment |
John's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
John Buchanan: I wonder what it does as far as automatic retuning is concered. It might not be retuning as such, but adding new services.
I can think of two possibilities:
1. The TV adds new services that are being broadcast by transmitters that you already have multiplexes stored for. Perhaps either that information is carried on those multiplexes (information about new services) or it does a scan through the band to see if there are new services available from the same transmitter(s), ignoring those that are from other transmitters.
2. The TV scans through the entire band and stores any signals from any transmitters that it has never stored before.
If it is 1, then you might get around it storing new Crystal Palace services (and those of other transmitting stations within range) by either preventing it from storing them when you do the auto tune scan or deleting them (if the receiver allows).
If it is 2, then disabling the auto service update might be your only option. However, if it puts new services in the 800s, this might not be such an issue, although I find that when mine does do this, I have to go through the menu to skip them so that from 728 upwards, the next logical channel is 1.
link to this comment |
John Buchanan: Yes, a lot of people will be confused and perhaps carry out unnecessary scans thereby causing more problems such as getting the wrong transmitter stored as the main one. Perhaps some will assume that this is the correct one and wonder why it is that their transmitter is now a poorer signal (breaking up etc).
Storing of the incorrect transmitter (i.e. the one for which the aerial does not face) is obviously a common problem, particularly in certain areas. The same thing happened with analogue and this usually meant a poor picture.
link to this comment |
Friday, 17 February 2012
Advice as to aerial and transmitter combination. I live halfway down Bluebell Hill and have noticed that my neighbours with external aerials have them pointed somewhat west, rather than north. I assume they're therefore using Crystal Palace. I only have a loft aerial: I've never put any import on a working aerial until now as I have Sky HD. However, given the weather (snow often blocks the Sky dish) AND the fact I have a shiny new large LED telly with Freeview HD built-in, it's worth having it, even as a back-up. Questions: I assume I should get an external one fitted. Bluebell Hill isn't going HD until 27th June. Should I wait til after that, and use that transmitter, or should I stay with Crystal Palace, and get HD now? Thanks in advance to all you knowledgeable people.
link to this comment |
Jeremy's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Jeremy: I would stay as you are and use the loft aerial on Blue Bell Hill.
Be aware that being so close to a high power transmitter you may find that you have to higher signal level than your TV can cope with. You may need to fit an attenuator. See this page:
Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice
I wouldn't bother trying for Crystal Palace in order to get HD because I think that you won't receive it at your location. CP does transmit HD, but its HD is at lower power than the standard definition channels. It was shoehorned in to provide HD services before switchover. HD is not part of the normal Freeview offering before switchover; Crystal Palace is one of four exceptions.
You could, of course, go for Crystal Palace at switchover on 18th April, but then Blue Bell Hill's switchover will only be ten weeks away.
link to this comment |
M
Mark Fletcher4:05 PM
Halifax
Jeremy,Maidstone.The world is your oyster.If you want to remain with Crystal Palace then yes you will most certainly need a new external aerial,a group A Yagi 18A or X-Beam XB16A as such,however if you decide to use Bluebell Hill instead then you can use either a group B,group E or a group W wideband aerial.However dont buy a group W wideband aerial for Crystal Palace itself if you remain with this transmitter,as being an all group A mast you will find that group W wideband antennas have a poor performance on all the channels in the group A band in a poor signal/marginal signal area within that particular transmitter itself.One final option you may consider diplexing your aerials using group A Yagi or X-Beam aerial for Crystal Palace and either a separate group B,group E (recommended) or even a group W wideband aerial for Bluebell Hill itself.Look up the ATV Aerials and Televisions of Sheffield website on new aerials,co-ax cables,co-ax plugs and diplexers,i am sure they will be of very valuable assistance to you and believe me they are IMHO the best aerial retailers in the business in the UK today.
link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Dave & Mark,
Thank you both for those amazingly fast responses! I bought a new aerial to replace the one in the loft, and when it's pointing at Bluebell Hill, the signal is all right, just a little disappointed I can't get Freeview HD. It sounds like the options are to invest in an aerial to hit CP (and risk not getting HD in any case) or stay with Bluebell Hill and wait. I wanted to go for a good generic solution as the TV goes into a Loftbox and then onto the other TVs in the house which are all getting Freeview built-in (one or two will have Freeview HD too in time I guess). Most of them just use the HDMI that I have sent around the house over Cat6, but in the event I want to use the tuners in them, I needed an aerial with a reasonable signal. Thanks to you guys it sounds like I'd best wait (not something I do well!) until after switchover for Bluebell Hill, and that should meet my needs. Thanks once again guys.
link to this comment |
Jeremy's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Thursday, 23 February 2012
C
chris greenstreet6:34 PM
Gravesend
why when my antenna is facing bluebell hill do i receive anglia which i dont want i have re scanned many times
link to this comment |
chris's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Select more comments
Your comment please