Full Freeview on the Bromsgrove (Worcestershire, England) transmitter
 | Google map |  | Bing map |  | Google Earth |  | 52.355,-2.078 or 52°21'18"N 2°4'40"W |  | B61 9JD |
The symbol shows the location of the Bromsgrove (Worcestershire, England) transmitter which serves 30,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Bromsgrove (Worcestershire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Bromsgrove (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Bromsgrove transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Bromsgrove (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Bromsgrove transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 18km northeast (41°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 18km northeast (40°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Bromsgrove (Worcestershire, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
| A K T | A K T | A K T | K T | K T | |||||
| C21 | C4waves | C4waves | C4waves | ||||||
| C23 | D3+4 | D3+4 | |||||||
| C24 | ITVwaves | ITVwaves | ITVwaves | ||||||
| C26 | BBCA | BBCA | |||||||
| C27 | BBC2waves | BBC2waves | BBC2waves | ||||||
| C29 | _local | _local | |||||||
| C30 | -BBCB | BBCB | |||||||
| C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C33 | SDN | ||||||||
| C36 | ArqA | ||||||||
| C41 | +SDN | ||||||||
| C44 | ArqA | ||||||||
| C47 | ArqB | ||||||||
| C48 | ArqB |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 6 Apr 11 and 20 Apr 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 2.8kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-8.5dB) 400W | |
| Mux 1*, Mux D* | (-17.5dB) 50W | |
| Mux 2*, Mux A*, Mux B*, Mux C* | (-20.5dB) 25W |
Local transmitter maps
Bromsgrove Freeview Bromsgrove DAB Bromsgrove TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the Bromsgrove transmitter area
|
|
Friday, 22 April 2011
A
AWED5:17 PM
Mike Dimmick, if I wore a hat I'd take it off to you. I removed one of the two aerial boosters and the TV was now able to tune into channel 26, with no adverse effects on the PVR. Removing both boosters caused the PVR to complain of loss of signal, so I'll stick with one.
Great! Many thanks for the tip!
| link to this comment |
Saturday, 23 April 2011
After the DSO, my PVR is failing to lock onto channels from PSB2 D3+4, Com5 ArqA and Com6 ArqB. It does find them when performing a full scan, it just does not lock onto them when changing channel.
The freeview decoder in my TV itself is able to pick them up without a problem.
I'm suspicious I have the same problem as this viewer, who had problems after the DSO at the Mendip transmitter.
Re: [mythtv-users] MtrhTv: Uk Mendip Transmitter issues
If I'm reading it correctly, his solution was to scan for the Transport Service ID's which his PVR had incorrect values for. Correcting the values fixed his problem.
I haven't been able to perform the scanning he describes, so does anyone know the Transport Service ID's for the Bromsgrove transmitter?
The values in my PVR are as follows:
Multiplex 1, Freq 490000000, Transport Id 16384 (PSB2 Not Working)
Multiplex 2, Freq 514000000, Transport Id 4165 (PSB1 Working)
Multiplex 3, Freq 538000000, Transport Id 8198
Multiplex 4, Freq 570000000, Transport Id 12290
Multiplex 5, Freq 578000000, Transport Id 20480
Thanks in advance for any help.
| link to this comment |
T
t10:35 PM
No bbc at all for me in Bromsgrove. Pressing '1' gives me 'invalid entry. Why?
| link to this comment |
L
LRC11:30 PM
Bromsgrove
Mike,
thanks for the reply and the info.
Don't have a booster but will try and obtain a atenuator..any suggestion on what size? currently have 100% signal and 100% quality on all other channels.
I am puzzled though: why does ArqB need twice as much signal ? if the transmitter is transmitting all the channels at the same power wont they all arrive at my aerial at the same level and so also at the TV receiver/decoder ?
| link to this comment |
LRC's: mapL's Freeview map terrainL's terrain plot wavesL's frequency data L's Freeview Detailed Coverage
Sunday, 24 April 2011
Re my question on the Transport Service ID's for the Bromsgrove Transmitter.
The transport id's in my PVR were incorrect. It seems since the switch over my Hauppauge Nova-T 500 Freeview card isn't detecting them properly.
It is detecting values:
Multiplex 1, Freq 490000000, Transport Id 16384
Multiplex 2, Freq 514000000, Transport Id 4165
Multiplex 3, Freq 538000000, Transport Id 8198
Multiplex 4, Freq 570000000, Transport Id 12290
Multiplex 5, Freq 578000000, Transport Id 20480
But the values should be:
Multiplex 1, Freq 490000000, Transport Id 8198 <- was 16384
Multiplex 2, Freq 514000000, Transport Id 4165
Multiplex 3, Freq 538000000, Transport Id 20544 <- was 8198
Multiplex 4, Freq 570000000, Transport Id 12290
Multiplex 5, Freq 578000000, Transport Id 24640 <- was 20480
I manually adjusted these settings and everything is now working.
Maybe this is an issue with the Nova-T 500, but as it's a popular
card, I thought I'd report the correct values.
| link to this comment |
Malcolm Landon: This is why you are always advised to completely delete any saved setting and do a "first time installation" at a switchover event.
| link to this comment |
R
romia1:10 PM
i forgot to retune on the 20th what can do will i be able to get anything back my tv is brand new and i cant use it
| link to this comment |
Briantist : Those incorrect settings are detected after completely deleting all previous settings - the error definitely isn't caused by old settings. Performing a rescan now, inserts the bad settings again. The only fix appears to be manually adjusting them.
| link to this comment |
Select more comments
Your comment please