Full Freeview on the Crystal Palace (Greater London, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.424,-0.076 or 51°25'26"N 0°4'32"W | SE19 1UE |
The symbol shows the location of the Crystal Palace (Greater London, England) transmitter which serves 4,490,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Crystal Palace (Greater London, England) mast?
CRYSTAL PALACE transmitter - AM: Radio 4 on MW has now closed. Please retune to FM, Digital Radio, digital TV, BBC Sounds or smart speakers to continue listening. More information can be found on the front page of this Reception Advice website. from 15 Apr 00:00. .
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Crystal Palace transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Crystal Palace transmitter?
BBC London 4.9m homes 18.4%
from London W1A 1AA, 12km north-northwest (335°)
to BBC London region - 55 masts.
ITV London News 4.9m homes 18.4%
from London WC1X 8XZ, 11km north-northwest (345°)
to ITV London region - 55 masts.
Are there any self-help relays?
Charlton Athletic | Transposer | Redeveloped north stand Charlton Athletic Football Club | 130 homes |
Deptford | Transposer | south-east London | 100 homes |
Greenford | Transposer | 12 km N Heathrow Airport | 203 homes |
Hendon | Transposer | Graham Park estate | 50 homes |
White City | Transposer | 9 km W central London | 80 homes |
How will the Crystal Palace (Greater London, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 21 Mar 2018 | ||||
VHF | A K T | A K T | A K T | A K T | W T | ||||
C1 | BBCtvwaves | ||||||||
C22 | ArqA | ArqA | |||||||
C23 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C25 | SDN | SDN | |||||||
C26 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
C28 | -ArqB | ArqB | |||||||
C29 | LW | ||||||||
C30 | C4waves | C4waves | C4waves | -BBCB | BBCB | ||||
C33 | BBC2waves | BBC2waves | BBC2waves | com7 | |||||
C35 | com8 | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 4 Apr 12 and 18 Apr 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 200kW | |
com7 | (-13.7dB) 43.1kW | |
com8 | (-14dB) 39.8kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D*, LW | (-17dB) 20kW |
Local transmitter maps
Crystal Palace Freeview Crystal Palace DAB Crystal Palace AM/FM Crystal Palace TV region BBC London LondonWhich companies have run the Channel 3 services in the Crystal Palace transmitter area
|
|
Saturday, 16 June 2012
Peter: If manufacturers started using F-connectors, apart from the fact that adapters would often be needed, people would go connecting satellite dishes to terrestrial receivers.
link to this comment |
J
jb385:36 PM
martyh: Well there shouldn't really be any noticeable difference in the overall colour of the screen area when the set isn't switched on, although on some tubes including flat screen CRT types, the corners can appear to be slightly darker by a combination of the glass being thicker in this area as well as it turning inwards. i.e: not quite so much looking straight through the glass but slightly diagonally.
That said this would not affect the picture size any, and even although you might have set the TV's picture ratio to auto you have make sure that widescreen (or 16:9) has also been selected on the Logic as well, the selection being offered on "First time installation" under "TV type" using the <-> arrows.
Maybe you could have a check on that.
link to this comment |
M
martyh6:30 PM
Hijb38. As per my previous posts I have tried every combination re: unifying settings between my TV and the Logic, including altering the extensive options on the TV, whilst trying differnet modes on the Logic.Just to refresh the leaflet for my TV is here: http://download.p4c.phili….pdf and maybe you may be able to look through it and spot something that perhaps I'm missing in the technical blurb? Thanks for your reply to my last post but there has definately been a 'physically visible' change in terms of what I see (when looking close up) when the TV is off (and unplugged), bearing in mind I can clearly see that the 'black' edge surrounds on the actual screen have definately become bigger, and un-uniformed (that's to say there is no longer an even measure (of non picture showing area around the four sides of the screen as was before)thus seemingly reducing the viewable area. It's hard to get this across in writing on here. However, the problem still persists whereby I have to ask why would this picture size thing suddenly change without me altering any of the settings on either the Logic or TV all of a sudden, just like that? ie: switching the TV off one week where it was working fine, then switching on the next to find it not. I am a persistant chap however, and will keep trying over this weekend to see if I can do something that will fix the issue, and of course let you know how I get on, though from what you siad last post, maybe it could indeed be a problem with the Logic. THANKS for all the help and suggestions on this jb38, am determined to get to the bottom of it! Regards, martyh
link to this comment |
J
jb387:04 PM
martyh: Yes, but its not so much a combination of both devices that I would suggest that you concentrate on but making sure that the Logic is left permanently on 16:9 and then only making your ratio selections on the Philips, these being either 16:9 movie expand with or without subtitles, or alternatively just being left on automatic, as there isnt really any other adjustments that you can choose, unless that is you had previously selected "zoom" whilst on one of these modes but which had reverted to normal.
By the way I have the manuals for both these devices.
link to this comment |
J
jb387:25 PM
martyh: Also meant to add, that if nothing you do seems to resolve that issue then carry out "factory settings" on the Philips, as that guarantees that you are starting afresh and then you can take things from there.
link to this comment |
Sunday, 17 June 2012
M
martyh8:30 PM
ok, thanks jb 38. I tried several attempts flicking through the aspect ratio on the Logic and on the 6th attempt in a row, the screen corrected itself. The picture being slightly better, also helped by use of the DNR button on the TV remote. Picture is now even. I think you are right re picture quality etc, in that I can no longer benefit from the processing features as seen before when pictures delivered straight thru the ariel, as some options no longer work using the Logic with scart connection. So I think I just have to put up with how things are, or when enough money saved up, buy one of the latest HD TV's. I think I'm done on this now, so thanks for the time and effort you've put in. It's just a shame that the format for the new signal made my TV somewhat redundant, when I'm sure it still has years of life left. Philips could also have been more pro-active as well I feel, leaving customers thinking their TV's would be ok for the new signal, when they were not but I know the government has quite a bit of blame there. I still feel cheated thinking about the £1600 I initially forked out though!! Regards, martyh
link to this comment |
Monday, 18 June 2012
J
jb3812:07 AM
martyh: I would suggest that before you completely resign yourself into having to purchase a new HD TV you should try and borrow a normal Freeview box from someone for purposes of comparing its picture quality (after having been adjusted) with what you are getting from the Logic scart receiver.
I fully sympathise with your feelings regarding your TV being effectively redundant as I know a number of people who feels exactly the same, and especially if the CRT's in their TV's are still OK and not suffering from low emission because of the tubes cathode being on the way out, as should a TV with a good CRT be sat beside a modern LED illuminated flat screen LCD set, the picture on the LCD / LED set always looks positively flat and lifeless, and I havent seen one yet that doesn't.
Plasma TV's aren't quite so bad though, as just like in a CRT set the actual screen itself is illuminated and not being done via a back light as in LCD sets.
link to this comment |
Tuesday, 19 June 2012
M
martyh6:33 PM
Thanks jb38. Out of interest, would a new flat panel TV (of same screen size 32") consume less electricity than my Philips, which consumes 175 watts (normal operation), not forgetting the logic which consumes another 4 watts - total 179 watts please? martyh.
link to this comment |
J
jb389:35 PM
martyh: Its very difficult to give an exact figure, but the average I get using a few 32" models as examples, e.g: Sony / Panasonic / LG's etc gives a figure of around 120 watts, one of the Sony's only being listed as having 90 watts consumption.
Plus of course you wouldn't really be using the Logic with a new set anyway, so its really out of the equation.
Will say though, your Philips CRT set does seem to be a bit greedy on power consumption, as a 32" (4:3) Panasonic CRT set with pro-logic sound that I used to have only consumed 140 watts, as I used to run it from a 175 watt 12volt / 250 volt inverter when the power failed, the inverters cooling fins only ever becoming mildly warm albeit there wasn't that large of a power loading safety margin.
link to this comment |
Wednesday, 20 June 2012
M
martyh11:22 AM
Thanks jb38, I see. LED TV's are on the market now, any opinions on them. Not that I can afford to change mine yet, will hang on to it for the foreseeable future, unless I have to replace for some reason.
link to this comment |
Select more comments
Your comment please