Full Freeview on the Crystal Palace (Greater London, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 51.424,-0.076 or 51°25'26"N 0°4'32"W |  | SE19 1UE |
The symbol shows the location of the Crystal Palace (Greater London, England) transmitter which serves 4,490,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Crystal Palace (Greater London, England) mast?
Crystal Palace transmitter - Crystal Palace transmitter: Possible effect on TV reception week commencing 25/11/2024 Pixelation or flickering on some or all channels 
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Crystal Palace transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Crystal Palace transmitter?
BBC London 4.9m homes 18.4%
from London W1A 1AA, 12km north-northwest (335°)
to BBC London region - 55 masts.
ITV London News 4.9m homes 18.4%
from London WC1X 8XZ, 11km north-northwest (345°)
to ITV London region - 55 masts.
Are there any self-help relays?
| Charlton Athletic | Transposer | Redeveloped north stand Charlton Athletic Football Club | 130 homes |
| Deptford | Transposer | south-east London | 100 homes |
| Greenford | Transposer | 12 km N Heathrow Airport | 203 homes |
| Hendon | Transposer | Graham Park estate | 50 homes |
| White City | Transposer | 9 km W central London | 80 homes |
How will the Crystal Palace (Greater London, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 21 Mar 2018 | ||||
| VHF | A K T | A K T | A K T | A K T | W T | ||||
| C1 | BBCtvwaves | ||||||||
| C22 | ArqA | ArqA | |||||||
| C23 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C25 | SDN | SDN | |||||||
| C26 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C28 | -ArqB | ArqB | |||||||
| C29 | LW | ||||||||
| C30 | C4waves | C4waves | C4waves | -BBCB | BBCB | ||||
| C33 | BBC2waves | BBC2waves | BBC2waves | com7 | |||||
| C35 | com8 | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 4 Apr 12 and 18 Apr 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 200kW | |
| com7 | (-13.7dB) 43.1kW | |
| com8 | (-14dB) 39.8kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D*, LW | (-17dB) 20kW |
Local transmitter maps
Crystal Palace Freeview Crystal Palace DAB Crystal Palace AM/FM Crystal Palace TV region BBC London LondonWhich companies have run the Channel 3 services in the Crystal Palace transmitter area
|
|
Saturday, 28 May 2016
K
KJB11:00 AM
Reading
I have an aerial on roof directed to Crystal Palace. Everything has been fine for years and always update when notified of new channels. Recently we have been experiencing poor signal for BBC 1 & 2 but BBC 1 HD & 2 HD have been relatively fine. On the non HD channels the picture starts to break up but after a while it recovers. It will e okay for a few days and then the break up occurs again. Last night we lost BBC 1 & 2 completely. The HD channels are still okay as are all the other channels. Have reset / retune a couple of times and now it does not even find any signal so does not allocate a channel number to them. HD versions are still fine. When retuning we have 5 TV channels with from memory 91 total channels.
We have recently seen large "birds" hanging around on the aerial near to where the cable picks up its feed. My wife thinks they might have been pecking that termination point causing damage. I am not sure this could be the case as I would have thought that would impact all of the channel and not just these two.
Before I get an aerial person in to check wanted to see what anyone might think about what is happening.
| link to this comment |
KJB's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
K
KJB11:03 AM
Reading
KJB: Correction - we have 65 TV channels not 5!
| link to this comment |
KJB's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
Monday, 30 May 2016
A
Alex 4:01 PM
Iver
Hi,
I can't receive COM7, CH33 in Iver Heath SL0 0PT, although all coverage maps show strong signal. I know 100% that for example Talking Picture channel 81 definitely worked on the same receiver before, now it is gone. I tried all sort of reset/ retuned without cable then tuned again, nothing helped.
My Polaroid HD model DTT 1810 shows no signal on CH33, all other CHs up to 29 have good signal.
Regards,
Alex
| link to this comment |
Alex's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
M
MikeB11:20 PM
Alex : Whats your signal strength? If the remaining muxes are low, points to the obvious - you've got a problem with your system, and the whole thing is gradually going. Frayed cable, etc most likely reason. Start with the fly lead from the back of the TV - swapping it out is easy, cheap, and might cure it. If not, at least yo know its not that and then you can follow the signal path back.
| link to this comment |
Tuesday, 31 May 2016
V
Vic10:23 PM
Well I bought an indoor aerial and can get all the channels perfectly, including several I couldn't even tune in before. Up to 138 odd channels now and it's all working perfectly. Signal quality is much better and occassionally the picture breaks up during bad weather but it;s only for a split second and miles better than the rubbish outdoor aerial that could barely manage the main channels and would often go dead for minutes.
I bought the One4All SV9395 as have had good experience with One4All kit previously. Works great and very happy with the results. Am based in Esher area.
| link to this comment |
Wednesday, 1 June 2016
MikeP
1:11 PM
1:11 PM
Vic:
Knowing the Esher area fairly well having worked from Tolworth, I suspect your 'old' outdoor aerial was faulty or the cabling from it to the TV set was. The signals from Crystal Palace should be received perfectly well by a good aerial system, so I would advise having a contractor examine your outdoor system and correct the faults found. An indoor aerial is not guaranteed to give reliable results.
| link to this comment |
Thursday, 2 June 2016
R
Richard Cooper11:19 AM
Norwich
Alex : Hi Alex in Iver. Are you sure your Freeview receiver or box can decode HD (high definition) signals? I ask because COM7 is an HD multiplex rather than a standard definition (SD) multiplex. Standard definition (SD) receivers will not list HD multiplexes or channels on them when you carry out a service search or retune even if you do a manual tune, because they can't decode HD. You can purchase an HD set-top box for 43 online. I checked myself just the other day when my Freeview HD receiver failed: it simply connects via the HDMI connection to your tv set! Hope this helps, Richard, 11:18, Thursday 2nd June 2016, Norwich.
| link to this comment |
Richard's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
V
Vic4:41 PM
Hi MikeP,
I already connected directly to the aerial from the roof (it runs to a junction box inside the house) and although the picture is perfect there when I tested on the day, it still doesn't pick up half a dozen of the channels. I think the missing channels is because the aerial can't pick them up (I've never been able to tune them in properly) and either needs replacing for a wideband one or is not pointing in the right direction, perhaps because of bad weather knocking them askew. The picture dropping for channels I can receive does point to an internal cable problem but it's so intermittant and erratic that I've not the time or enthusiasm to spend hours trying to figure out what it is. The internal aerial works so much more reliably than the outdoor one with a much higher signal quality that there's no point trying to fix the outdoor one.
Cheers,
Vic
| link to this comment |
MikeP
7:19 PM
7:19 PM
Vic:
When you mention a 'junction box' do you mean an active splitter, a passive splitter or just a join between three or more coaxial cables?
There may be faulty connections inside a 'junction box' and you should double check all joints and connectors are fitted proper. If you are using a passive splitter, with no power supply needed, are all the output cables connected to a TV set? If not, an unconnected cable can give rise to frequency selective reflections within the cable and/or impedence mismatch which can cause you type of problem. Aerials must be connected to a 75 Ohm load, adding a passive splitter with an unconnected cable will change that dramatically! So check that there are no breaks in any of the cables too.
Any aerial for Crystal Palace must be either a Group A type (but not a wide band one, they will not help you) or else a log-periodic (which are wide band coverage) and all with the rods horizontal.
| link to this comment |
Monday, 6 June 2016
V
Vic11:54 AM
Hi MikeP,
I mean an active splitter. The aerial runs first to an amplified signal booster (goes from 0 to 20db but changing attentuation makes no difference though) and then from there to a powered active splitter. The splitter is used to feed an aerial connection to several rooms.
I've connected a TV direct to the aerial in three places; before it goes to the booster, after the booster and before the splitter and then finally, directly after one of the splitters. There are still half a dozen channels missing and same results so I don't think it's that.
The wiring was all done professionally but was a long time ago. What I don't get is that the channels will be fine one day (although still a bunch missing - channel 33) and then other times a multiplex will be completely screwed although it always seems to be the same set of multiplexes (channels 22 and 30).
With the indoor aerial, everything works all the time with only very minor interference.
Cheers,
Vic
| link to this comment |
Select more comments
Your comment please