Full Freeview on the Emley Moor (Kirklees, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.611,-1.666 or 53°36'41"N 1°39'57"W | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
Derwent B | Active deflector | 74 homes | |
Derwent C | Active deflector | (second level) | |
Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
Hmp Leeds | Transposer | 30 homes | |
Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
VHF | B E T | B E T | B E T | B E T | W T | ||||
C10 | ITVwaves | ||||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C36 | ArqA | ||||||||
C37 | C5waves | C5waves | |||||||
C39 | _local | ||||||||
C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-5 | 870kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
com7 | (-12dB) 54.8kW | |
com8 | (-12.3dB) 51.2kW | |
Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
Mux A*, LLS | (-22.4dB) 5kW | |
Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Monday, 5 November 2012
Ron Lake
11:45 PM
Wakefield
11:45 PM
Wakefield
David,
I am pleased to hear that it has now been upgraded to the same power as the others. I am, at the moment, sorting out my gear between redecorating, as everything in this bungalow has changed. I am running the downline from my rooftop aerial through the loft to feed three rooms, easy peasy, no floors to lift. Finally my TV's can be wall mounted.
link to this comment |
Ron's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
Tuesday, 6 November 2012
D
David Parker4:07 PM
Ron Lake
I would offer to help, but I have a traped nearve in my left leg.
So I wish you all the very best
Davep
link to this comment |
Thursday, 8 November 2012
N
Nigel8:36 PM
Malton
THIXENDALE self help as been switch off due to lack of use Info from resident I spoke to in June
link to this comment |
Nigel's: mapN's Freeview map terrainN's terrain plot wavesN's frequency data N's Freeview Detailed Coverage
Monday, 12 November 2012
J
Joanne Lomas9:17 PM
We have just moved to a HD8 postcode yet the free view box only picks up a bad signal from North East and not Yorkshire tv! How do we connect the freeview box to receive a signal from Emley Mast??
link to this comment |
Joanne Lomas: The answer as to the cause may be due to the fact that the Bilsdale transmitter (which carries Tyne Tees/North East programming) uses lower channels/frequencies than Emley and is therefore picked up first during the scan. If, having done the scan, the receiver simply goes with the first it found, then maybe that explains why it goes with Bilsdale.
There is a simple way around it and that is to have the aerial lead unplugged for the first 30% of the scan so as to have it out for Bilsdale and in for Emley.
link to this comment |
Joanne Lomas: If, having tuned it to Emley Moor, you still have difficulty, then your receiver could perhaps be being overloaded due to too high a signal level brought about by its close proximity to the transmitter. See:
Freeview signals: too much of a good thing is bad for you | ukfree.tv - 10 years of independent, free digital TV advice
It may also be worth checking that it is tuned to Emley Moor by viewing the signal strength screen whilst on each of the following and ensuring that the tuned UHF/RF channel number (frequency) is that of Emley:
PSB1 | BBC One | C47
PSB2 | ITV1 | C44
PSB3 | BBC One HD (if applicable) | C41
COM4 | ITV3 | C51
COM5 | Pick Tv | C52
COM6 | Film4 | C48
link to this comment |
J
Joanne9:39 PM
Thanks Dave! The first suggestion worked perfectly... Better signal and better quality!
link to this comment |
Sunday, 25 November 2012
Hi for months now both my tvs(one has freeview already in it. The other a freeview box. The channels freeze consantly,on both, im not even sure how to see whether its emley point etc. When we auto tune it stops at 57% and wont go any further, please help, its stressing me out, btw the freezing is even worse during adverts.
link to this comment |
J
jb389:05 AM
barbara jackson: As far as an autotune stopping at 57% is concerned you should carry out a complete reset on the TV or box in question, this generally referred to as "factory reset" or "default setting" etc, alternatively you might see "first time installation" as these names are dependant on the manufacturers definition.
As you haven't provided a location, this being in the form of a post code or one from nearby, then its not possible to check on the signal levels expected at your location.
link to this comment |
Saturday, 22 December 2012
G
Gerry12:53 PM
During the last week or so channel 52 has become impossible to receive. I have tried retuning Auto and manual with no luck. All other channels and strengths ok. No signal strength showing on ch52. I live at Hambleton near Selby. Anyone else having problems?
link to this comment |
Select more comments
Your comment please