Full Freeview on the Malvern (Worcestershire, England) transmitter
Google map | Bing map | Google Earth | 52.116,-2.331 or 52°6'56"N 2°19'53"W | WR14 4AD |
The symbol shows the location of the Malvern (Worcestershire, England) transmitter which serves 58,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Malvern transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Malvern transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-midlands-today.jpg)
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 49km northeast (36°)
to BBC West Midlands region - 66 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-central.jpg)
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 49km northeast (35°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Malvern (Worcestershire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
C/D E | C/D E | C/D E | C/D E T | W T | |||||
C29 | SDN | ||||||||
C31 | ArqA | ||||||||
C37 | ArqB | ||||||||
C41 | BBCA | ||||||||
C44 | D3+4 | ||||||||
C47 | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C51tv_off | _local | _local | |||||||
C53tv_off | BBCA | ||||||||
C55tv_off | ArqB | ||||||||
C56tv_off | BBC1waves | BBC1waves | BBC1waves | ||||||
C57tv_off | D3+4 | ||||||||
C59tv_off | -ArqA | ||||||||
C60tv_off | -BBCB | ||||||||
C62 | BBC2waves | BBC2waves | BBC2waves | ||||||
C66 | ITVwaves | ITVwaves | ITVwaves | ||||||
C68 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 2kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-10dB) 200W |
Local transmitter maps
Malvern Freeview Malvern DAB Sutton Coldfield TV region BBC West Midlands Central (West micro region)Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Friday, 23 September 2011
R
Rich11:47 AM
Both of the following:
1) when looking at the channel source some channels have both the main frequency and the 166 MHz offset
2) Other TVs in the house all at 100% strength and quality
are true for me, although I am further from the transmitter. Oh, and the offset on mine seems to be 167MHz.
I'll be interested to know how you get on.
link to this comment |
S
sid8:16 PM
Rich:
The problem with media center is that the only visable tuning indication is a row of dots that that move from left to right as it tunes up the UHF band.
This would mean that it tunes into the Sutton Multiplexes 39 to 46 before the Malvern ones in the 50s.
There is no way you can find the actual Ch numbers in Media Center.
Regards
link to this comment |
Saturday, 24 September 2011
A
andy walker10:05 AM
I get no reception at all from com 5 ch 59 from malvern. All other channels fine. Is it online? Went off on 21st.
link to this comment |
B
Brian WR510:20 PM
Richard, Malvern,
Thanks for the comments, good to know it's not just me !!
I have taken out my booster/splitter and am still getting 60% in MC. I also have the offsets (both + and - on some frequencies) showing at the same 60%. In addition I have these "shadow" frequencies appearing - one is even at 80%. I am also getting some Malvern frequencies showing 0% quality but when I select them and disable the others, the picture is fine.
We have lots of trees and houses around and the signal has always been bad so I'm not convinced it's a problem with too much signal. My Humax shows 70% strength and 100% quality (same aerial, the RF cable goes to the Humax and then loops through to the HTPC).
Brian
link to this comment |
B
Brian WR510:29 PM
Richard, Malvern,
Just a quick PS to my previous post - in relation to your comment about the number of sources, I assume you expect 4 sources because you have two dual-tuner cards? I have a single dual-tuner card and on some channels I am getting 18 sources ...
Brian
link to this comment |
Sunday, 25 September 2011
R
Rich11:19 AM
Sid,
Is there really no way of choosing a transmitter in Media Center 7? Am I just stuck with this problem?
Rich
link to this comment |
R
Richard Worthington12:13 PM
Brian,
Yip - I've got two dual tuners hence expect 4 sources but do get 4,8,12 or 16 on various channels. I had a session yesterday to try and resolve the problems. I bought a variable attenuator from Maplins (Blackpole) and set the power of the signal to around 90% using a TV to show the power/quality. I then had various rounds of setting up the TV signal in media center (MCE)- did notice it would detect (or not detect) different channels on different scans in an inconsistent way. Eventually did get a good scan that detected the channels as expected - I think MCE does strange things if it has channels already so I suggest doing a scan and when it's complete you have the option to delete channels. Do this, reboot and then rescan and this seems to solve the scanning issue.
I also invested in a new graphics card (PNY GT430 Nvidia PC World £59.99) that had hardware video processing since did notice PC was struggling decoding the HD signal.
So by the evening was getting all the channels without any problems and recorded/watched BBC1 and ITV in HD with no problems.
Now this morning am getting interference on BBC1 and ITV1. This got me thinking since had noticed before I had problems in the morning but seemed to be ok later on in the day which led me to think about interference from a source. With a bit of googling came across this
TV Interference Advice, Solve TVI Problems | TVI Filters
Since so close to the Malvern transmitter and close to the fire station this is potentially a problem. I've ordered a filter (via ebay for £10 but this has the details http://www.garex.co.uk/AK…htm) so will let you know if this makes any difference.
BTW you can use 'Sitefinder' Mobile Phone Base Station Database to see if there is a Tetra transmitter close by - I stuck in your postcode and there is one on Williamson Rd so depending on where you live could be an issue.
Will let you know how I get on with the filter !
Cheers,
Richard
(WR141QJ)
link to this comment |
R
Richard Worthington12:20 PM
Malvern
Rich,
Suggest trying the "deleting" approach in my previous post and see if that works
"I think MCE does strange things if it has channels already so I suggest doing a scan and when it's complete you have the option to delete channels. Do this, reboot and then rescan and this seems to solve the scanning issue. "
I did try pulling out the aerial until the scan got to 50% (to get the higher channels) but that didn't seem to work though that was before I deleted the channels first so might be worth a try if the above still doesn't work !
cheers,
Richard
link to this comment |
Richard's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
R
Rich2:06 PM
Richard,
Thanks for the advice. I'll give these things a try!
Cheers,
Rich
link to this comment |
G
Graham5:52 PM
andy walker: I'm receiving all channels off Malvern without any problems - check that you haven't got a sky box or VCR with an RF output tuned to channel 59 (simplest way is to switch them off).
link to this comment |
Select more comments
Your comment please