Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.130,-0.242 or 52°7'47"N 0°14'33"W |  | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sandy Heath (Central Bedfordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
| 1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
| VHF | A K T | K T | K T | W T | W T | ||||
| C6 | ITVwaves | ||||||||
| C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
| C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C35 | _local | ||||||||
| C36 | ArqA | ||||||||
| C39 | C5waves | C5waves | |||||||
| C43 | _local | ||||||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | SDN | ||||||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
| SDN, ARQA, ARQB | (-7.7dB) 170kW | |
| com7 | (-13dB) 49.6kW | |
| com8 | (-13.1dB) 49.1kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
| Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Thursday, 12 May 2011
Maz: As above "The commercial multiplexes at Sandy Heath will remain on their pre-switchover channels and powers for a period after digital switchover. SDN will then temporarily move to channel 31 (at 20kW ERP) on 31 Aug 2011, before adopting its final allocation of channel 51 on 18th April 2012. Arqiva A will adopt its final allocation of channel 52 on 23 Nov 2011. Arqiva B will temporarily move to channel 67 (at 20kW ERP) at switchover and then it will adopt its final allocation of channel 48 on 14 Sept 2011"
| link to this comment |
Tuesday, 17 May 2011
A
Andy Hicks11:08 AM
We have experienced "sound drop" on some freeview boxes (metronic) since the "Switch over" can you advise if this is down to various tests and changes over this period as we have consumers complaining that there products appear to be faulty.
Please can you advise officially what the status is and when things are going to be "set"
Thanks in advance
Andy Hicks
| link to this comment |
Andy Hicks: I would see Freeview intermittent interference | ukfree.tv - independent free digital TV advice but the most likely explanation is you have too much signal.
If you have any boosters or amplifiers, remove them from your system. If you don't you may have to fit an attenuator.
| link to this comment |
S
Steve12:27 PM
Wrexham
Why are tuners not equipped to recognise and deal with a strong signal?
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Steve: Because they are built to a specification of what a reasonable signal level will be. Attenuators cost only a few pounds, much easier to provide the correct signal level to your equipment.
| link to this comment |
S
Steve1:12 PM
Wrexham
But it would probably only cost a few pence to add circuitry to cope with the highest likely signal strengths.
And why is there no effort to publicise this problem? I don't recall seeing it on ads re changeover, or in manuals for tuners.
I am far more technical than the average viewer, and I am only aware of the problem from you posting about it!
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Steve: OK, you seem to know best.
The information is included in ALL switchover documentation. For example Digital UK's Anglia Aerial Installer Newsletter :
"DSO provides for substantial DTT power increases at all UK transmitters when analogue services end, to enable Ofcom's
condition of matching the 98.5% UK analogue coverage figure. Power increases for individual muxes vary. The average is a
ten-fold increase that provides a further 10dB gain into the Freeview receiver. We will notify you of the transmission power
increases for Sudbury and Talconestion and their relay transmitters in future newsletters.
Amplifiers
When transmission powers increase, homes with aerial amplifiers could experience service loss or picture and sound
disturbance due to the DTT receiver's tuner being overloaded. Old aerial amplifiers with poor filtering could cause video/
audio synchronisation problems where the receiver trying to read noise as a DTT signal. Removing the amplifiers should
rectify both issues. "
| link to this comment |
S
Steve7:44 PM
Wrexham
Brian - Yes, they have told YOU - the professional who probably knew already.
But I don't recall seeing the information in anything sent to the mass of viewers; or broacast on the TV.
Have I missed it?
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Steve: Clearly you have until now. I've been going on about it for .. about a decade now.
Why are you so upset about having to spend a fiver?
| link to this comment |
Wednesday, 18 May 2011
S
Steve12:47 AM
Wrexham
Brian - I don't even have the problem. I'm upset on behalf of the people who have had the problem imposed on them.
Digital switchover is a pain - and a cost - for me. But at least I have a background to understand it.
I have just fought through the DSO process on behalf of a disabled person. It took 4 visits and a GREAT deal of me being VERY purposeful.
There must be tens of thousands of disabled people who do not have a me to fight for them.
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Select more comments
Your comment please