Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Tuesday, 5 April 2011
M
Michael Mann4:50 PM
I recently purchased a Digital Stream 8205 Freeview HD recorder and carried out a complete scan. At the end of the scan I had the option of Cambridge & Beds or East Midlands and natually selected Cambridge & Beds living in east Cambs.
Most programs seem OK except ITV3 which comes with a very weak signal this appears to come from East Midlands on CH 29. During the actual scan I noticed ITV3 also came up on CH43 is this the Cambridge & Beds (Sandy) signal if so how can I tune this in?
link to this comment |
D
Derek9:23 PM
Drop of signal strength on all channels and signial quality down to 35% ish from 9 PM tonight
link to this comment |
Wednesday, 6 April 2011
D
Duncan9:01 AM
Hi,
Reading on this link 2011 switch-overs start today at Sandy Heath, Nottingham | ukfree.tv - independent free digital TV advice it says that Sandy Heath will be an 'oddity' and require a wideband aerial - I have only ever had a Type A aerial, and have had freeview since it changed over from OnDigital - I can receive all channels and have no breakup (I only live approx 15 miles from Sandy Heath itself) - After DSO will I suddenly lose a load of channels - or, as I can receive them all now, will all be okay?
Any advice gratefully received...
Thanks,
link to this comment |
M
Mike Dimmick9:16 AM
Reading
Duncan: The pre-switchover digital transmissions are all outside Group A - above C38.
There are really a few possibilities. Either you've had a wideband all this time and not known it, some part of the aerial is missing making it pick up outside the designed channel range, or you're close enough to the transmitter that it actually doesn't matter.
If you're getting all the Freeview channels already, you should still be able to get them all after switchover completes.
link to this comment |
Mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
D
Duncan9:26 AM
Shefford
Thanks for the quick response Mike :)
It's definitely a Type A aerial, so - I shall consider myself lucky (some fat pigeons have - over the years, bent some of the elements, so I guess I could've just got lucky!!)...
Looking forward to the new HD channels - only one week to go!! :)
link to this comment |
Duncan's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Thursday, 7 April 2011
C
Chris7:26 PM
I retuned my Sony VTX-D800U a couple of days ago and since then if I select BBC2 I get BBC2 for about 2 seconds and then the program switches to BBC1, yet all the on-screen data continues to show BBC2. Same problem on BBC4; that also switches to BBC1.
A Google search indicates lots of VTX-D800U owners have the same issue. A retune does not solve the problem, so basically I can no longer view BBC2 or BBC4.
Any ideas what's happened and how do I solve it?
Many thanks.
link to this comment |
M
Mike Dimmick11:03 PM
Chris: Unplug the box, leave it for a few minutes, and plug it back in.
This problem was first reported on Humax boxes. My hypothesis is that the BBC have changed the program ID for the code that pops up the 'Press Red' indicator - reusing a program ID previously used for 'return to last transmission' when you press TEXT to exit the interactive stream. They probably didn't think anyone's box had been on long enough to still have it cached.
Or, they've changed the program and it's not compatible with some MHEG interpreters, but that wouldn't explain why power-cycling the box is working for so many people.
It is recommended that you do a complete retune from scratch at switchover dates, but I can't see how to do this.
I did find this method of doing a software reset:
Digital Spy Forums - View Single Post - Sony VTX-D800U (merged)
That whole thread might be useful. (RG47SH)
link to this comment |
G
Gwyn Jones11:47 PM
To Dave of Ely, I have the same problem with our Philips TV - digital text has stopped working, but it continues to work fine on our non Phillips TV in the bedroom
Burwell Cambs
link to this comment |
Friday, 8 April 2011
C
Chris12:39 PM
Many thanks Mike
I found out how to do a factory reset of the Sony box and that seems to have solved the problem.
link to this comment |
Saturday, 9 April 2011
Gwyn Jones: Doing a "first time installation" usually fixes the digital text problem.
link to this comment |
Select more comments
Your comment please