Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.130,-0.242 or 52°7'47"N 0°14'33"W |  | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sandy Heath (Central Bedfordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
| 1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
| VHF | A K T | K T | K T | W T | W T | ||||
| C6 | ITVwaves | ||||||||
| C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
| C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C35 | _local | ||||||||
| C36 | ArqA | ||||||||
| C39 | C5waves | C5waves | |||||||
| C43 | _local | ||||||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | SDN | ||||||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 1000kW | |
| BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
| SDN, ARQA, ARQB | (-7.7dB) 170kW | |
| com7 | (-13dB) 49.6kW | |
| com8 | (-13.1dB) 49.1kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
| Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Monday, 2 May 2011
J
James10:23 AM
Norwich
Why does the picture on ESPN look poor compared with Sky Sports 1 & 2 on Freeview?
Yet Sky Sports 1 & 2 are on a similar mux which even more channels?
| link to this comment |
James's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
J
James10:25 AM
Cambridge
Sorry previous post should be Sandy Heath transmitter in Cambridge
| link to this comment |
James's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
S
Steve11:10 AM
Wrexham
John - suspect it is what they plug in that is poor, not the trransmission - seen other complaints about ESPN.
John - Could be that the Skybox is overamplifying the RF input. Or could be that the channel it is using to output its own signal is in conflict with one you need.
But can't see a need to have RF in or out of the skybox anyway.
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
J
John12:18 PM
Without a Signal Level Meter it is an impossible task on the levels Steve but I suspect the Sky box will give no gain, and I strongly suspect the Sky box is corrupting the signal.
| link to this comment |
S
Steve12:54 PM
Wrexham
If the sky box is designed to take the main feed from the aerial then pass it on to the TV it almost certainly will amplify it as well, as if not it might attenuate unacceptably.
Indeed if the box was unpowered that could be the problem.
If you want to experiment, try powercycling the skybox and see if it has any effect. Esp. on analogue channels if you still have any.
And see if you can find out what RF the skybox usses. This page will show "safe" channels if you input your postcode.
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
J
John1:42 PM
I tried several compilations Steve, the box doesn't provide gain I put the set top aerial in and the signal strength was the same to the TV with the box in or out! same symptoms on the quality level "None" I may just have a rogue box? I will try and borrow one from a friend.
| link to this comment |
S
Steve2:11 PM
Wrexham
Well if the strength was 100% it could show no higher!
It is conceptually feasible that something in the boxes RF handling circuits spoil the QAM, but I know nothing of this.
But surely you have no need to put RF into or out of the skybox anyway?
| link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
J
John5:11 PM
The Aerial ins and out have been the same for a couple of years the only thing that has changed is the TV and you are correct I don't need the through path of the Sky box so the cause was found that's the main thing!
| link to this comment |
J
JohnB5:18 PM
Peterborough
Steve/John
Does a Sky box put an analogue signal out on the rf output. I beleive this is how I get Sky signals to other teles via an distrib.amp.
I was hoping BTVision box would do the same but have had no luck.
| link to this comment |
JohnB's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
J
John5:25 PM
Steve I forgot to add the set top aerial was attenuated a lot by placing it on the floor in the wrong direction so I got 70% signal before the box and it was the same through the box apart from no quality showing and yes JohnB it will pass through no problem mine has for a couple of years.
| link to this comment |
Select more comments
Your comment please