Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sandy Heath (Central Bedfordshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Friday, 10 June 2011
S
Steve12:29 AM
Rob - yee hah!
We are so used to other problems that actual hardware failure is the last thought!
link to this comment |
Friday, 17 June 2011
O
OS110:35 PM
Newmarket
I am starting to think this digital switch over is just a huge con. Before the "power boost" we got 103 radio and TV channels. Now it's 74. Film 4 has gone as has More 4. The box upstairs is displaying artefacts every 30 seconds. The aerial is on a mast on the roof and is almost new and the cabling all good. We have a 4 way splitter box. Now I read something about Sandy Heath not really going full strength until September. Why?! Didn't they have long enough in the first place? I also have been told that the booster in the loft could be an issue but without it how do we split the signal? The Humax box downstairs is giving 74% for signal strength and 100% for quality. Blimey, things were a lot easier in 405 days!!
link to this comment |
OS1's: mapO's Freeview map terrainO's terrain plot wavesO's frequency data O's Freeview Detailed Coverage
Sunday, 19 June 2011
A
Adam Meakins6:29 PM
hi there, I live in the Dunstable area and I see that you say that you cant get all the channels like itv2 and film4 etc. I have an aerial in the loft with a booster and a splitter to 4 points. what do I need to buy to get the rest of the other channels?. kind regards
adam
link to this comment |
S
Steve11:54 PM
Adam - I don't follow your post.
What can YOU get and what can YOU not get?
I for one have no idea where Dunstable is.
If you plug your full postcode in top right there are useful links.
link to this comment |
Monday, 20 June 2011
M
Mike Dimmick2:06 PM
Dunstable
Adam: UHF reception can vary greatly between locations only a small distance apart, so we really need a full postcode to see the situation for you.
Taking a postcode for the centre of Dunstable (Bing Maps gives a co-ordinate of 51.8858052045107,-0.52066370844841 which nearby.org.uk translates to LU6 3SH), I get a prediction of 100% on the PSB multiplexes, 73% on Mux A, 76% on Mux C and 92% on Arqiva B. This is the estimated probability of finding a location for a rooftop aerial that would give reliable reception, at that postcode. The simplified coverage checker for consumers will show that as 'good' on all six multiplexes (the threshold is 70%).
I would start by bypassing the booster and splitter and seeing what the situation is like on each TV connected individually to the aerial. If you can get all the channels, plug the splitter in without the booster and try again. If you find that you can't get all channels with the booster, but can without, leave it disconnected. Otherwise, check that the booster has just enough gain to offset the loss through the splitter. A 4-way splitter typically drops 8 dB.
It may all just fix itself as the switchover programme completes. The retune in August changes the prediction for Mux A to 97%, while that in mid-September puts Mux C to 93% and Arqiva B to 99%. The November retune and mode change turns Mux C into Arqiva A, for which the new prediction is 99%.
link to this comment |
Mike's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Wednesday, 22 June 2011
R
Russ Dring1:33 PM
Peterborough
Nigel.
I too have a 37"Panasonic TV with freeview and freesat tuners built-in. I get, from Sandy Heath, 100% signal on all multiplexes and 100% quality on five of them the HD multiplex shows about 20% quality. There has been no pixelating on any picture and there has not been since April 2011.
I also use a Humax HD recorder,the signal quality on all including the HD multiplex is 100%, signal strength between 90% on the PSB channels and about 78% on the comm. multiplexes.
That is using the same source signal, cable etc. so I wonder if the Panasonic TV is not displaying the quality properly on Ch 21? The same could be happening to yours?
link to this comment |
Russ's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
R
Robert Dawson2:39 PM
Northampton
The aerial is outside on 16ft pole. My tv is HD ready and I have an LG full HD dv3 recorder but no HD transmission. What else do I need?
link to this comment |
Robert's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
S
stoppingservice3:08 PM
You need a recorder or TV which has a "Freeview HD" tuner. See:
What does "Full HD Ready" actually mean? | ukfree.tv - independent free digital TV advice
DTG :: Consumer :: DTV logos and High Definition
link to this comment |
M
Mike Dimmick3:42 PM
Robert Dawson: 'DV3' is probably the stylised DVB logo from DVB - Digital Video Broadcasting - Home . The model number is likely to be on a sticker on the back of the unit.
link to this comment |
Saturday, 2 July 2011
B
Bob Archer8:07 AM
at my location IP27 C67 MUX seems to come & go with the weather???? if it is sunny, the signal is 100%, rain - it's gone completly - all other MUXs are being recieved Fine.
link to this comment |
Select more comments
Your comment please