Full Freeview on the Oxford (Oxfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 51.790,-1.179 or 51°47'25"N 1°10'46"W | OX3 9SS |
The symbol shows the location of the Oxford (Oxfordshire, England) transmitter which serves 410,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Oxford transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Oxford transmitter?
BBC South (Oxford) Today 0.4m homes 1.6%
from Oxford OX2 7DW, 6km west-southwest (258°)
to BBC South (Oxford) region - 6 masts.
BBC South (Oxford) Today shares 50% content with Southampton service
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 102km south (182°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Oxford (Oxfordshire, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 23 May 2018 | ||
VHF | C/D E | C/D E | C/D E | C/D E | C/D E T | W T | W T | ||
C2 | BBCtvwaves | ||||||||
C29 | SDN | ||||||||
C31 | com7 | com7 | |||||||
C37 | com8 | com8 | |||||||
C41 | BBCA | ||||||||
C44 | D3+4 | ||||||||
C46 | _local | ||||||||
C47 | BBCB | ||||||||
C49tv_off | C5waves | C5waves | |||||||
C50tv_off | SDN | SDN | |||||||
C51tv_off | LOX | LOX | |||||||
C53tv_off | C4waves | C4waves | C4waves | +BBCA | +BBCA | +BBCA | |||
C55tv_off | ArqB | ArqB | ArqB | com7tv_off | |||||
C56tv_off | COM8tv_off | ||||||||
C57tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
C59tv_off | -ArqA | -ArqA | -ArqA | ||||||
C60tv_off | ITVwaves | ITVwaves | ITVwaves | -D3+4 | -D3+4 | -D3+4 | |||
C62 | SDN | ||||||||
C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 14 Sep 11 and 28 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
Analogue 5 | (-11dB) 40kW | |
com8 | (-14.7dB) 17.1kW | |
com7 | (-14.8dB) 16.4kW | |
Mux 1*, Mux 2*, LOX | (-17dB) 10kW | |
Mux C*, Mux D* | (-18dB) 8kW | |
Mux A*, Mux B* | (-19.2dB) 6kW |
Which companies have run the Channel 3 services in the Oxford transmitter area
|
|
Thursday, 12 January 2012
N
nicola2:13 PM
Hi Dave,
Both TVs are running of a splitter now and recieving good-very good signal. I managed to get both boxes record the same programme to check that having both on wasnt causing problems. That checked out ok but after an hour of watching and recording my box suddenly stated no signal when trying a channel, but signal details hadnt changed.
I reset the box completely and rescanned several times before getting everything back.
Watching seems ok but when recording anything I get constant skipping again, it seems to be bbc one mainly, Is it worth trying an attenuator for my box, would you suggest a variable one or a specific db
Its great that you are helping
link to this comment |
nicola: I would get a variable attenuator, such as that which is shown on the other page entitled "Freeview signals: too much of a good thing...". These usually give you a range up to 20dB.
Put variable attenuator into eBay and some will come up.
I would try putting it on the feed into one of the boxes. If 60 or 70% strength gives 100% quality, then I would try it at that.
If it works, then you might try putting the attenuator before the splitter and adjusting so that both devices work.
link to this comment |
nicola: Watch out because some of the attenuators have F-connectors (which are the threaded and therefore need screwing together) and some have the coax connectors on (the sort you just plug in as found on the back of TVs and recorders).
The most commonly encountered type of connector used for terrestrial aerials are the plug in coax ones, so you probably want one of these. For example:
TV Aerial Attenuator Variable 0-20Db Freeview Digital | eBay
eBay - The UK's Online Marketplace
link to this comment |
Saturday, 14 January 2012
N
nicola7:53 AM
Hi Dave here is an update, I have been running both boxes on the splitter and have come across a few things, Both boxes get a blank screen when going onto really, and itv2+1 Prob others too. both boxes are skipping when recording.
my box states signal quality good, signal level around 70% so I am worried that I need to boost this rather than use an attenuater to dampen.
link to this comment |
Monday, 16 January 2012
nicola: Be aware that the three commercial (COM) multiplexes are currently on much lower power from Oxford than its Public Service Broadcaster (PSB) ones.
Thus, you will have to ensure that you attenuate enough to make the PSBs watchable without attenuating the COMs too much so as to make them too weak for your machine to show a picture.
On 18th April the COMs will go to their full final power, which will be lower than that of the PSBs (which are already at their full final power). So it is to be expected that there is a difference in signal strength.
The scale on different boxes will differ, so ultimately it is try it and see. As an example, my Sony recorder (HXD-RDR870) gave strengths of around 50 to 60% before switchover and it worked fine. The quality was 100% and therefore the picture wasn't degraded.
If the 70% is on BBC or ITV1/C4 and ITV2+1, Really is breaking up or gone, then you need to reduce your attenuation to let some more of the signals through.
For a full list of Freeview services and what multiplex they are carried on, see here:
DTG :: DTT Services by Multiplex
Basically, I would look at the first service in each multiplex. So check BBC One, ITV1, BBC One HD (if applicable), ITV3, Pick TV and Yesterday. As I say, the trick will be not to attenuate too much so as to loose the last three, but enough to reduce the level of the first three enough.
Come 18th April this will be easier because the COMs won't be so weak with respect to the PSBs.
link to this comment |
N
nicola5:03 PM
Hello again,
I just checked the channels that you suggested and I dont get ITV3 and PickTV at all despite them showing up on the program guide.This is without a booster or attenuator connected, would an antenuator not make this worse rather than better and would a variable booster be better until the signal strength of the transmitter is at full power again.
link to this comment |
D
David Pinfold7:36 PM
Banbury
Nicola - where you are located you should not have any problems receiving any of the channels, even with the power restrictions on the commercial multiplexes. You should easily be able to passively split the signal to 2 receivers. Either there is too much signal (likely if you have a roof mounted aerial) or you have fault (Bad connection, short circuit in the aerial cable etc). My advice would be to have it checked by a profeesional aerial rigger.
link to this comment |
David's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Tuesday, 17 January 2012
nicola: It is a possibility that the reason your receiver isn't picking up two of the (weaker) COMs is because the strong PSBs is desensitising your receiver.
That is, it is less sensitive to the weaker COMs because it is reacting to the strong PSBs.
Change to ITV3 and bring up the signal strength meter. Now connect the attenuator into the aerial lead and turn it and see what happens. Get an idea of where the strength is at its highest. See if adding attenuation actually increases it.
link to this comment |
Saturday, 21 January 2012
L
LJ10:17 PM
Swindon
I keep loosing my freeview signal - sometimes ok for days, sometimes drops for 10 minutes then ok, then sometimes drops for 24 hours+. my aerial (newish one that was sold for digital use) is halfway up my roof outside pointing towards Oxford. Signal is great when its on, then it just drops. It doesn't scatter, just goes to no signal. Has gone off and on about 10 times today, 20-30 minutes at a time. Anyone have the same problem?
link to this comment |
LJ's: mapL's Freeview map terrainL's terrain plot wavesL's frequency data L's Freeview Detailed Coverage
J
jb3811:03 PM
LJ: As Oxford transmits on vastly different power levels between the BBC/ITV and the three commercial multiplexes what channels are you saying that you lose?
link to this comment |
Select more comments
Your comment please