Full Freeview on the Bluebell Hill (Medway, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 51.324,0.520 or 51°19'25"N 0°31'13"E | ME5 9RD |
The symbol shows the location of the Bluebell Hill (Medway, England) transmitter which serves 200,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Bluebell Hill (Medway, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Bluebell Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Bluebell Hill transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-south-east-today.jpg)
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 28km southwest (218°)
to BBC South East region - 45 masts.
![regional news image](/styles/images/regionalnews/302x152/itv-meridian.jpg)
ITV Meridian News 0.7m homes 2.7%
from Maidstone ME14 5NZ, 5km south-southeast (155°)
to ITV Meridian (East) region - 36 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Bluebell Hill (Medway, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2012 | 2012-13 | 19 Jul 2018 | |||||
E | E | E | W T | W T | |||||
C21 | _local | ||||||||
C28 | _local | ||||||||
C32 | com7 | ||||||||
C34 | com8 | ||||||||
C39 | +ArqA | ||||||||
C40 | BBC1waves | BBC1waves | BBC1waves | +BBCB | SDN | ||||
C43 | ITVwaves | ITVwaves | ITVwaves | D3+4 | ArqA | ||||
C45 | SDN | BBCB | |||||||
C46 | BBC2waves | BBC2waves | BBC2waves | BBCA | ArqB | ||||
C54tv_off | ArqB | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off | ||||||||
C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 13 Jun 12 and 27 Jun 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 30kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-1.8dB) 20kW | |
com8 | (-7.8dB) 5kW | |
com7 | (-8.1dB) 4.7kW | |
Mux 1*, Mux B*, Mux C*, Mux D* | (-10dB) 3kW | |
Mux 2*, Mux A* | (-11.8dB) 2kW |
Local transmitter maps
Bluebell Hill Freeview Bluebell Hill DAB Bluebell Hill TV region BBC South East Meridian (East micro region)Which companies have run the Channel 3 services in the Bluebell Hill transmitter area
|
|
Wednesday, 25 July 2012
J
jb3811:32 PM
Briantist: No problem whatsoever! as I fully understand that it wasn't the coverage from a single station that was being illustrated.
By the way many thanks for sorting out the sites Twitter link access problem, as with the listings shown not being section dependant but in a continuous stream I find this extremely convenient for making a quick check now and again to see if anyone has replied to any request for further info that I may have made.
link to this comment |
Thursday, 26 July 2012
J
jb3811:37 PM
D: In "some" devices you can delete the offending channels whilst in the EPG listings guide menu, sometimes called "edit channels".
link to this comment |
Saturday, 28 July 2012
J
Julie ayling8:42 AM
Hi we have an old portable with a set top digital box and haven't been able to get bbc since the switch over. I have tried on numerous occasions to retune, both automatically and manually, but it still says we have a poor signal so no bbc. We have a digital tv downstairs that works brilliantly. So my question is do I need to
1. Get a new digibox
2. Get a digital tv
3. Get a new ariel
Or 4. Reposition my ariel
Sorry I am completely rubbish with this sort of thing!
link to this comment |
K
KMJ,Derby9:41 AM
Julie ayling: Have you tried the set top box downstairs to see if it will receive the BBC channels on an aerial connection that you know to be working? If it works, you know that there is a problem with the signal being supplied upstairs and you will need to reposition or improve the aerial. If it still refuses to receive the BBC mux there could be a problem with the sensitivity or characteristics of the box, in this event if you give details of the make/model of the box a check can be made as to whether it is one known to have issues. Likewise, if you give some indication of your location, preferably a postcode, a check can be made on predicted reception in the locality.
link to this comment |
Friday, 10 August 2012
J
Jonathan Currah10:26 AM
Tonbridge
Yesterday I suddenly lost signal from ITV3, Yesterday & Film4
I tried a retune but still could not get a signal.Do you think this is a reception problem or a receiver fault.
I have a new Sony KDL40HX853
link to this comment |
Jonathan's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
K
KMJ,Derby1:01 PM
Jonathan Currah: It appears that you lost reception of SDN and ArqB muxes. Check that your receiver is tuned to the correct transmitter for the direction in which your aerial points. For Bluebell Hill this is C45 for ITV3 and C54 for Yesterday/Film4. You are predicted to have good reception possible from several transmitters, so incorrect frequency selection during a channel scan is possible. There is also the possibility that tropospheric ducting caused out of area signals to block reception of the missing channels, this being possible whichever transmitter is tuned in, but even more likely if, by chance, these two muxes were tuned to the "wrong" transmitter.
link to this comment |
Tuesday, 14 August 2012
J
Jonathan Currah5:23 PM
Tonbridge
Thanks for your help. I have got a signal now but no info on EPG on some channels ( including those mention above ) unless I tune to those channels. I think my TV has tuned to more than one transmitter and I don't seem to be able to delete unwanted ones.
Any suggestions?
link to this comment |
Jonathan's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
J
jb385:36 PM
Jonathan Currah: Try removing the aerial and then carrying out a rescan, as on most equipment (exceptions apply) this will blank out the channel memory, then after reconnecting the aerial again manually tune in the channels provided by KMJ,Derby.
If by the way the aerial out procedure has not blanked out all the channels stored, then carry out a factory reset (sometimes called default setting) and this will, then carry out the manual tune.
link to this comment |
Tuesday, 21 August 2012
M
Mark Allison9:26 PM
Dear Sir/Madam
Since the last re-jigging of the channels at the Bluebell hill transmitter on 27th of June the EPG data for Humax PVR has not been filling in correctly.
After numerous emails with Humax over the last couple of months, he came to the conclusion that it must be a transmitter issue.
I didn't at first believe that but today I checked my Sony TV and found it was doing exactly the same thing! (I normally watch TV either via humax or cable so don't often use the TV's own tuner)
The channels that are missing EPG seem to be on the same MUXes and will only fill in if I switch to a channel on that MUX and leave it there for a while.
For example, today I noticed I'd only got 2 days worth of guide data for ITV4, Yesterday, PickTV & Dave (and numerous others).
I had to switch the channel to PickTV and leave it there for several minutes before the guide data for PickTV & Dave was populated (both on same MUX).
Similarly, switching channel to ITV4 populated that and Yesterday etc.
This is common to my TV AND My Humax and only started right after the last switch.
The Humax Engineer said that all the guide
data should be being transmitted on the same MUX.
Clearly this must have been the situation before as I never had issues before the last switch over.
When is this situation going to be resolved please?
Its a bit of a nonsense having to religiously switch my humax to a channel on each MUX for several minutes on a daily basis in order to keep the EPG (and therefore recordings) valid.
Regards
Mark Allison
link to this comment |
Thursday, 23 August 2012
K
Ken Collyer12:05 PM
Mark Allison.
I don't know if this helps or confuses things, but I watch TV from Bluebell Hill via a Humax PVR and last night I checked the EPG and as far as I can see all the information is there up until midnight next Wednesday. I did only look at the "Yesterday" channel but that also showed one or two others either side. It is of course possible that there was a problem with the transmitter and that it has been fixed between your posting Tuesday evening and my checking 24hrs later.
link to this comment |
Select more comments
Your comment please