Full Freeview on the Sudbury (Suffolk, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.005,0.786 or 52°0'17"N 0°47'8"E |  | CO10 5NG |
The symbol shows the location of the Sudbury (Suffolk, England) transmitter which serves 440,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Sudbury (Suffolk, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Sudbury (Suffolk, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Sudbury transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Sudbury (Suffolk, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Sudbury transmitter?
BBC Look East (East) 0.8m homes 3.2%
from Norwich NR2 1BH, 77km north-northeast (24°)
to BBC East region - 27 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 0.8m homes 3.2%
from NORWICH NR1 3JG, 78km north-northeast (24°)
to ITV Anglia (East) region - 26 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (West)
Are there any self-help relays?
| Felixstowe West | Transposer | 1000 homes +1000 or more homes due to expansion of affected area? | |
| Witham | Transposer | 14 km NE Chelmsford. | 118 homes |
How will the Sudbury (Suffolk, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 1 Aug 2018 | |||||
| B E T | B E T | B E T | E T | K T | |||||
| C29 | SDN | ||||||||
| C31 | ArqA | ||||||||
| C35 | C5waves | C5waves | |||||||
| C37 | ArqB | ||||||||
| C41 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C44 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C47 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
| C51tv_off | BBC1waves | BBC1waves | BBC1waves | ||||||
| C56tv_off | ArqB | ||||||||
| C58tv_off | SDN | ||||||||
| C60tv_off | -ArqA |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 6 Jul 11 and 20 Jul 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 250kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 100kW | |
| Analogue 5 | (-7dB) 50kW | |
| Mux 2* | (-14.9dB) 8.1kW | |
| Mux B* | (-15.2dB) 7.5kW | |
| Mux 1* | (-15.5dB) 7kW | |
| Mux A* | (-17dB) 5kW | |
| Mux C* | (-22.2dB) 1.5kW | |
| Mux D* | (-23.6dB) 1.1kW |
Which companies have run the Channel 3 services in the Sudbury transmitter area
|
|
Thursday, 14 March 2013
N
Nick9:10 PM
DTR 2250, JB.
I don't believe it shows the stations it is finding. It does have manual tuning. Progress bar during the scan. I disconnect aerial till nearly half way through to stop it logging onto channels from local relay, 23 and 28.
Thanks
| link to this comment |
Friday, 15 March 2013
J
jb3812:40 AM
Nick: Although I have the manual for that particular box (also known as a Logic LDV2250) the information supplied therein is very limited in the technical sense, but I would like you to go into the main menu and select "reset set top box" to make sure that everything already stored in the EPG list will be deleted, that is excluding any programmes that you have already recorded and stored on the hard drive, as these are quite safe.
Once done then go into the manual tuning screen then enter and scan on BBC's mux Ch44 storing anything found, then change the search channel to 41 (ITV 1 etc) and carry out the same procedure as before.
Have a look at the EPG listings and you should only see BBC and ITV group channels being listed, once this is observed put the box into standby and then switch it off altogether to simulate it being switched off overnight.
Leave it that way for about an hour or so before switching it back on again then check the EPG programme listings and see if BBC is still being seen, if it is then just click on it to see if this results in normal reception, if though the screen is still blank then go into the tuning menu again and enter BBC Mux Ch44 but do NOT press search or scan as this action should result in the signal level being seen, make a note of the level and then compare it with that obtained whilst on ITV1, giving an update on results.
| link to this comment |
N
Nick5:35 PM
JB,
thank you very much, will try this.
Sorry to be thick, but just wondering what we are proving here. Are you suggesting I might have actually lost the signal when I turn on to a blank screen? It does not say 'no signal.'
I will tune it to channels 41 and 44, only as you say, although what gets me is that these strongest channels are the ones that disappear.
[I know which are the strongest channels thanks to Icecrypt box.]
| link to this comment |
N
Nick10:18 PM
Please does anyone know why when I use a digibox with crt 12 inch screen tvs I get a buzz on the sound, but not with larger sets?
| link to this comment |
Saturday, 16 March 2013
J
jb387:27 AM
Nick: I am really trying to determine as to whether or not your problem is simply being caused by your box picking up more channels during an auto-scan than the tuners memory capacity allows hence the ones picked up first are dropping out, this excluding the possibility of the tuners memory IC having developed a fault.
Of course it could also be found that the problem is being caused by one of the most common reasons of all, and being that the signal level is dipping under the reception threshold for the tuner, although to reiterate on a previous comment I made with regards to the box, insomuch that by it not having separate strength and quality indicators then this is a serious impediment to it being used for any form of meaningful tests, as when dealing with DTT signals a quality indicator is an absolute must.
And on that subject of quality, it would be advantageous if you had a variable attenuator in line with the boxes aerial socket albeit with it normally being kept set for zero attenuation, because going by what you have reported with regards to receiving a strong signal from the BBC mux, if indeed you are then what "might" be happening is that the signal is occasionally peaking over the top and causing intermittent blocking of that mux, as signals received at distances can rapidly fluctuate upwards as well as the reverse and if the former was applying then this is where the in-line variable attenuator would be handy, because should you find that the picture had vanished you could instantly verify (or not) if the problem was being caused by an intermittent signal level excess.
By the way the other reason for suggesting the variable attenuator is that it might be somewhat easier to use that rather than temporarily bypassing the booster.
| link to this comment |
J
jb387:40 AM
Nick: I would say that the size of the screen is not really connected in any way to the problem, but though does this buzz change in pitch with the content of the picture? insomuch varies with the intensity of the picture but with it generally being worse on a whiter screen likewise fades or darker ones, or is the noise constant no matter what the content of the picture is?
Is this being connected to the box via a scart lead?
| link to this comment |
N
Nick5:10 PM
JB,
You are a marvel.
Yes, connected by scart to small set, buzz does change pitch according to brightness, but only marginally. Have another small set, ancient Fergusson without remote facility connected by aerial socket to Icecrypt, no problem.
I think you may be barking up the right tree re too much signal on BBC/ITV. I have a whopping homemade aerial and booster to be able at last to pull in the naff mux on c60. Fortunately I also have a 'homemade' booster, it is one of those behind the set ones. I have split it, with the gubbins on the mast, powered by a cable, to the transformer in the attic. I will remove the transformer and replace with 6 volts, as I found during testing I could reduce the gain that way. What a palaver over a rotten mux on c60! If I lose c60 doing this, I will swear!
I will also do your experiment.
| link to this comment |
N
Nick5:30 PM
JB, just to clarify.
Only my tvonics is on Sudbury. It is not overstretching itself with channels. I only connect the aerial when it looks close to channel 41, a trick difficult to achieve. If I do not do this, it logs onto the local Aldeburgh channels.
All small sets are on Aldeburgh.
Are you saying that if the BBC signal from Sudbury peaks too high it can cause the picture to vanish...and not be restored without a retune?
| link to this comment |
J
jb386:32 PM
Nick: Basically yes! this based entirely on what you have reported with regards to the signal being strong etc.
But as far as the PSB channels being lost are concerned, if the action of selecting BBC1 results in a blank screen then the "only" way of determining the cause is by following (exactly) the manual tune test procedure as described in my reply on the 12th @ 07.53PM.
| link to this comment |
J
jb387:31 PM
Nick: Re: your 05.10PM posting concerning signal strength reductions etc, I would strongly recommend that you keep the test as simple as possible by "only" using an attenuator in line with the aerial socket as was described, because if you attempt to reduce the signal by changing the voltage being fed to the home made booster then you are effectively bringing something else into the equation thus making it difficult to evaluate the results as its effectively dealing with the unknown as far as signal attenuation is concerned.
Another problem that could be introduced by this action being, that there is always the possibility of the signal passing through the amplifier becoming corrupted due to the RF transistor being used for amplification becoming unstable because of insufficient voltage on its collector compared to that of the high level of RF on its base.
| link to this comment |
Select more comments
Your comment please