Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
![regional news image](/styles/images/regionalnews/302x152/bbc-look-east-west.jpg)
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
![regional news image](/styles/images/regionalnews/302x152/itv-anglia.jpg)
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Local transmitter maps
Sandy Heath Freeview Sandy Heath DAB Sandy Heath TV region BBC Cambridge Anglia (West micro region)Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Saturday, 28 September 2013
N
NigelJ10:27 PM
Wisbech
During the summer months I was able to receive all the free view channels without any problems.
Since the latest engineering work on Sandyheath, my television reception has been terrible. The signal strength remains very high at all times, but the signal quality is zero a lot of the time. The BBC mux is most affected, but the interference moves across the band.This sound like massive multi-path interference .What have they done to the Tx aerials or are they playing with the linarity of the PAs?
link to this comment |
NigelJ's: mapN's Freeview map terrainN's terrain plot wavesN's frequency data N's Freeview Detailed Coverage
Sunday, 29 September 2013
M
MikeG8:28 AM
Sadly folks it's just interference due to foreign stations coming in strong. Happens on Digital signals just like it did on analogue terrestrial TV in the past when you used to see two pictures at once.
This type of interference usually happens when the barometer reads between 1025 and 1030mB; a little unusual to happen at 1010mB, the current pressure. As soon as the high pressure system moves away all should return to normal. However it looks to be with us for at least another week according to the forecast. If, like I, you also have Freesat that isn't affected. Mike.
link to this comment |
K
KMJ,Derby9:03 PM
MikeG: Sometimes the culprits are UK transmitters in adjacent regions! A look at the William Hepburn's Tropospheric ducting forecast charts will give some indication of which transmitters could be sending signals way beyond the normal coverage area. The Rowridge transmitter is co-channel with the Sandy Heath PSB muxes and Emley Moor is co-channel for the COM muxes.
link to this comment |
M
Mark10:28 PM
We've had no BBC 1,2,ITV1 all day! Is this just rubbish reception stilk? NN7 northants.
link to this comment |
Monday, 30 September 2013
G
G9:07 AM
Mark: I am also in PE38 if it was not for the fact i can view via sky i would get rid of the TV, bbc spent the last week plugging the new Atlantis and low and behold that evening BBC1 signal is gone, the rest of the week its been ITV Ch4 that's been gone. As you say bring back analogue.
link to this comment |
R
Robin Meyers2:41 PM
We have had intermittent loss of signal on all channels since Friday 27th September. It is not only our problem but is affecting various apartment blocks on our site. (51.9506,-0.2748)
link to this comment |
R
Robin Hitchin2:46 PM
We have had problems with loss of signal intermittently affecting all channels since Friday 27th September.
It seems it is affecting many of the apartment blocks on our site so it's it is not within our apartment as first thought. Does anybody know the reason? (51.9506,-0.2748)
link to this comment |
B
Brian Greensides4:24 PM
High Brian Greensides here in March Cambs.
I have been having all the above reported problems, even checked if my loft aerial had moved. It was ok (set at 205 degrees to pick up Sandy) or if the 8 way distriburtion amp had failed, no it hadn't. We have a freeview Humax box which allows me to monitor the signal strength and quality. At the worst times of interference or in some cases no program received at all, the sig strength was 80-85% and quality ranged from 0 to 45%. Following much hair pulling a friend suggested that the problem was possibly Waltham or Tachleston breaking through and to try removing the loft amp. I followed this advice yesterday and although the signal strength has reduced to 65-70% the quality is still 100% and so far reception has been without problems.
Hope this may help others
Regards Brian
link to this comment |
J
jb389:29 PM
Brian Greensides: Although I appreciate the point you are making but its impossible for Waltham (@ 41 miles) or Tacolneston (@ 45 miles) to be the cause of the problem you were experiencing as well as the fact that they operate on totally different channels anyway, and as Sandy is located @ 31 miles away I would doubt if it would be able to overload your receivers input either, and so purely for a test you should backtrack on what you have done by reconnecting the booster / splitter followed by checking if the quality has taken a dive, if it does then although your booster "may" have developed a fault (doubtful though!) its much more likely that the input to your booster is being affected by some powerful form of local interference such as from a newly installed mobile phone mast etc or even an upgrade that has been carried out on an existing one.
That is, unless your problem was just being caused by remnants of the the high pressure induced interference that has been recently plaguing numerous viewers in various areas! but no matter what, those two transmitters can be eliminated from the equation.
link to this comment |
Tuesday, 1 October 2013
B
Bill10:04 AM
I have noticed that the signal returned yesterday morning, and that the problem was very wide spread. Why does it always say "no known problems" at the top of this page? Surely, if we were better informed, we would not be pulling our hair out trying to fix a problem that is not with our own equipment.
link to this comment |
Select more comments
Your comment please