menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Full Freeview on the Bluebell Hill (Medway, England) transmitter

first published this on - UK Free TV
sa_streetviewGoogle Streetviewsa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps51.324,0.520 or 51°19'25"N 0°31'13"Esa_postcodeME5 9RD

 

The symbol shows the location of the Bluebell Hill (Medway, England) transmitter which serves 200,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

Are there any planned engineering works or unexpected transmitter faults on the Bluebell Hill (Medway, England) mast?

Bluebell Hill transmitter - Bluebell Hill transmitter: Possible effect on TV reception week commencing 25/03/2024 Pixelation or flickering on some or all channels Digital tick


Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Bluebell Hill transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 H max
C32 (562.0MHz)242mDTG-20,000W
Channel icons
1 BBC One (SD) South East, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, plus 16 others

PSB2
D3+4
 H max
C34 (578.0MHz)242mDTG-20,000W
Channel icons
3 ITV 1 (SD) (Meridian (East micro region)), 4 Channel 4 (SD) South ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 South ads, 18 More4, 26 ITV4, 28 ITVBe, 30 E4 +1, 35 ITV1 +1 (Meridian south coast),

PSB3
BBCB
 H max
C45+ (666.2MHz)242mDTG-20,000W
Channel icons
46 5SELECT, 101 BBC One HD South East, 102 BBC Two HD England, 103 ITV 1 HD (ITV Meridian Southampton), 104 Channel 4 HD South ads, 105 Channel 5 HD, 106 BBC Four HD, 107 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others

COM4
SDN
 H max
C40 (626.0MHz)242mDTG-820,000W
Channel icons
20 Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 38 Channel 5 +1, 41 Legend, 42 GREAT! action, 57 Dave ja vu, 58 ITVBe +1, 59 ITV3 +1, 64 Blaze, 67 TRUE CRIME, 68 TRUE CRIME XTRA, 78 TCC, 81 Blaze +1, 83 Together TV, 89 ITV4 +1, 91 WildEarth, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, 267 Al Jazeera English, plus 30 others

COM5
ArqA
 H max
C43+ (650.2MHz)245mDTG-820,000W
Channel icons
11 Sky Mix, 17 Really, 19 Dave, 31 E4 Extra, 36 Sky Arts, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 60 Drama +1, 65 That's TV 2, 70 Quest +1, 74 Yesterday +1, 75 That's 90s, 233 Sky News, plus 11 others

COM6
ArqB
 H max
C46 (674.0MHz)245mDTG-820,000W
Channel icons
12 Quest, 25 W, 27 Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 52 GREAT! romance, 56 That's TV (UK), 61 GREAT! movies extra, 63 GREAT! romance mix, 71 That’s 60s, 73 HobbyMaker, 82 Talking Pictures TV, 84 PBS America, 235 Al Jazeera Eng, plus 18 others

DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)

Which BBC and ITV regional news can I watch from the Bluebell Hill transmitter?

regional news image
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 28km southwest (218°)
to BBC South East region - 45 masts.
regional news image
ITV Meridian News 0.7m homes 2.7%
from Maidstone ME14 5NZ, 5km south-southeast (155°)
to ITV Meridian (East) region - 36 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford

How will the Bluebell Hill (Medway, England) transmission frequencies change over time?

1984-971997-981998-20122012-1319 Jul 2018
EEEW TW T
C21_local
C28_local
C32com7
C34com8
C39+ArqA
C40BBC1wavesBBC1wavesBBC1waves+BBCBSDN
C43ITVwavesITVwavesITVwavesD3+4ArqA
C45SDNBBCB
C46BBC2wavesBBC2wavesBBC2wavesBBCAArqB
C54tv_offArqB
C55tv_offcom7tv_off
C56tv_offCOM8tv_off
C65C4wavesC4wavesC4waves

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 13 Jun 12 and 27 Jun 12.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-4 30kW
SDN, ARQA, ARQB, BBCA, D3+4, BBCB(-1.8dB) 20kW
com8(-7.8dB) 5kW
com7(-8.1dB) 4.7kW
Mux 1*, Mux B*, Mux C*, Mux D*(-10dB) 3kW
Mux 2*, Mux A*(-11.8dB) 2kW

Which companies have run the Channel 3 services in the Bluebell Hill transmitter area

Sep 1955-Jul 1968Associated-Rediffusion†
Sep 1955-Jul 1968Associated TeleVision◊
Jul 1968-Dec 1981Thames†
Jul 1968-Dec 1981London Weekend Television♦
Jan 1982-Dec 1992Television South (TVS)
Jan 1993-Feb 2004Meridian
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Bluebell Hill was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Comments
Sunday, 7 October 2018
MikeP
sentiment_very_satisfiedPlatinum

10:18 AM

Clive Whitehead:

To advise we need you to post your full post code so that we can tell which transmitter you are near and hence which channels are not currently in use.



link to this comment
MikeP's 3,056 posts GB flag
Tuesday, 9 October 2018
D
DaveK
9:04 AM

I keep losing certain channels on my freeview box due to no signal or signal too weak. Quest, drama, yesterday. being the main ones I watch (Im getting no signal on them now) there are others I lose or keeps breaking up

Ive done a retune loads of times, when I save Im given the choice of London or Kent. If I select London I can receive Quest, Drama and the ones I keep losing, but it doesnt find ITV and loads of other channels. But if I select Kent it finds them all but I keep losing quest, drama, yesterday etc

But my TV with its own built in freeview receives them all?? Thats saved to Kent as well???

Other TVs and freeview boxes in the house seem to be able to get quest yesterday etc ok??

link to this comment
DaveK's 2 posts US flag
MikeP
sentiment_very_satisfiedPlatinum

10:26 AM

DaveK:

Please provide a full post code, as requested, so that we can detwermine the reception conditions at your location and which transmitter(s) you should be able to receive from.

Retuning as a bad idea as all it will do is lose many channels that might have been correctly tune.



link to this comment
MikeP's 3,056 posts GB flag
D
DaveK
7:02 PM
Faversham

My post code is me13 8je

link to this comment
DaveK's 2 posts US flag
DaveK's: ...
Wednesday, 10 October 2018
K
Ken Collyer
sentiment_satisfiedBronze

11:00 AM

DaveK,
Can I suggest that you look at the signal strength for the programmes that are suffering weak or no signal. This may sound a bit daft but when you find the facility within the menu for monitoring signal strength it will also show what channel you're receiving the program on. Bluebell Hill is transmitting PSB1 on channel 32, PSB2 on 34, PSB3 on$%, COM4 on40, COM5 on 43 COM6 on 46, COM7 on 55 and COM 8 on 56, NOT as listed above (it's about three months out of date) but the programs are still transmitted on the same PSB or COM. The reason I make this suggestion is because I had a similar problem with weak or no signal on some station and when I investigated further I found that although I had selected KENT for my prefered transmitter my PVR had decided to save COM6 and 8 from London, not Bluebell Hill, resulting in the "Weak signal" or "No signal". For you it maybe other than London, perhaps Anglia or Tunbridge. To overcome this problem I selected all the programs transmitted on COM6 and 8, deleted them and did a manual re-tune on those two COM's. I hope this helpful. Incidentally, I too had no problem with my TV, only the PVR.

link to this comment
Ken Collyer's 24 posts US flag
Thursday, 11 October 2018
MikeP
sentiment_very_satisfiedPlatinum

11:12 AM

DaveK:

One common cause for problems like yours is poor aerial connections. So polease check all your aerial cables and if there are coaxial plugs/sockets then unplug them and refit. That will clear any corrosion/oxidation on the contacts and often cures the problem.

Further to that said by Ken Collyer, your signal strengths should all be between 60% and 85% - not more and no less.

Note that PSB3 from Bluebell hill is on channel 45 currently.



link to this comment
MikeP's 3,056 posts GB flag
Monday, 15 October 2018
C
Chris.SE
sentiment_very_satisfiedPlatinum

5:07 AM

MikeP:

As I have said before, I do not agree with your view on signal strength should not be more than 85%. This all very receiver dependant. People should be aware that too much signal can overload a receiver, but if quality on the muxes is 100% then there should be no issue with strength above 85%. Most of my strengthson Mendip are above 85% on 3 different receivers, one of which is PVR, and there are no issues. BUT that does not necessarily mean it would be the same for eg. a neighbour. Also note, the receiver might say the strength is 100% and that may not be accurate in all cases. Again, if quality is 100% and no loss of signal (except when there is transmitter work or adverse weather conditions) then there should be nothing to worry about.
Personally I also think 60% is possibly too low. That might become more critical for COMs 7&8 as more transmitters move to sharing UHF55&56.

link to this comment
Chris.SE's 4,102 posts GB flag
MikeP
sentiment_very_satisfiedPlatinum

10:52 AM

Chris SE:

When we regular contributors respond to a query, we have no knowledge of what equipment might be in use. The figures we all use are what has been found to suit all known equipment. Some are more sensitive than others and some less so. So between 60% and 85% is a good working average that works for everyone. Hence its extensive use.



link to this comment
MikeP's 3,056 posts GB flag
M
MikeB
sentiment_very_satisfiedPlatinum

10:21 PM

Chris.SE: I dont know of many tuners that are happy above 85% - my old Sony PVR got to about 93% before the ocassional breakup, but Mike P is right - 65-85% is fine, and might be too high for some.

If someone gets 100% quality and signal, good luck to them. But when a tuner is just on the cusp of having too high a signal strength, even the slightest change can have an effect. True, its a balancing act with less powerful coms, but I am fifty km from my transmitter, and I still have to kill some of the signal to avoid drop outs.

link to this comment
MikeB's 2,579 posts US flag
Tuesday, 16 October 2018
C
Chris.SE
sentiment_very_satisfiedPlatinum

2:26 AM

MikeP: & MikeB:

Whilst you have both made some statements that are correct -
eg. "Some are more sensitive than others and some less so."
eg. "a tuner is just on the cusp of having too high a signal strength, even the slightest change can have an effect."

you did not read carefully what I said -
Quote "This all very receiver dependant. People should be aware that too much signal can overload a receiver"
Quote "but if quality on the muxes is 100% then there should be no issue with strength above 85%."
Quote "Also note, the receiver might say the strength is 100% and that may not be accurate in all cases"
Quote "if quality is 100% and no loss of signal (except when there is transmitter work or adverse weather conditions) then there should be nothing to worry about. "

MikeB: Your comments "65-85% is fine, and might be too high for some."
"its a balancing act"

If I ever come across a receiver where 65% is too strong, I would say that it is not fit for purpose and would take the manufacturer to task.
As you've said, It can be a balancing act on occasions unfortunately.

I also said - Quote "I also think 60% is possibly too low. That might become more critical for COMs 7&8 as more transmitters move to sharing UHF55&56."
Whilst that is pure speculation, I don't think any of us can make any accurate comment on this as none of us have yet had the experience with multiple transmitters sharing the same 2 UHF channels.

Whilst I can't give any accurate reports from other equipment at present as I'm away, I will quote for the receiver I'm currently looking at on another main transmitter - It's an older Samsung and is showing 95% signal on all muxes and also 0 bit error on all muxes. It's 14 miles line of sight to the transmitter, I can go outside and see the red navigation warning lights on the mast. There is no pixelation or break up of picture or sound.

Whilst I may not post here every day, I have been posting for a number of years and have made more posts than my profile shows due to a change in email address which the system messed up and despite requests, like other things on the site, hasn't been updated/corrected. My comments are also based on being an experienced engineer, now retired.

All the figures we've quoted are not rigid, set in stone, etc. Whilst it reasonable to give a guide, to imply that more (or less) than a certain figure will give significant problems, is not reasonable, figures ought to be qualified.

link to this comment
Chris.SE's 4,102 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.