Full Freeview on the Emley Moor (Kirklees, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 53.611,-1.666 or 53°36'41"N 1°39'57"W |  | HD8 9TF |
The symbol shows the location of the Emley Moor (Kirklees, England) transmitter which serves 1,550,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Are there any planned engineering works or unexpected transmitter faults on the Emley Moor (Kirklees, England) mast?
Emley Moor transmitter - Emley Moor transmitter: Possible effect on TV reception week commencing 04/11/2024 Pixelation or flickering on some or all channels 
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Emley Moor transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Emley Moor transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 22km north-northeast (22°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 22km north-northeast (16°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
Are there any self-help relays?
| Derwent B | Active deflector | 74 homes | |
| Derwent C | Active deflector | (second level) | |
| Dunford Bridge | Active deflector | 14 km S Huddersfield | 15 homes |
| Hmp Leeds | Transposer | 30 homes | |
| Thixendale | Transposer | 25 km ENE York | 40 homes |
How will the Emley Moor (Kirklees, England) transmission frequencies change over time?
| 1956-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | ||||
| VHF | B E T | B E T | B E T | B E T | W T | ||||
| C10 | ITVwaves | ||||||||
| C32 | com7 | ||||||||
| C33 | SDN | ||||||||
| C34 | com8 | ||||||||
| C36 | ArqA | ||||||||
| C37 | C5waves | C5waves | |||||||
| C39 | _local | ||||||||
| C41 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
| C44 | BBC1waves | BBC1waves | BBC1waves | D3+4 | D3+4 | ||||
| C47 | ITVwaves | ITVwaves | ITVwaves | BBCA | BBCA | ||||
| C48 | ArqB | ArqB | |||||||
| C51tv_off | BBC2waves | BBC2waves | BBC2waves | SDN | |||||
| C52tv_off | ArqA | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | LLS |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-5 | 870kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 174kW | |
| com7 | (-12dB) 54.8kW | |
| com8 | (-12.3dB) 51.2kW | |
| Mux 1*, Mux 2*, Mux B*, Mux C* | (-19.4dB) 10kW | |
| Mux A*, LLS | (-22.4dB) 5kW | |
| Mux D* | (-23.4dB) 4kW |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Wednesday, 5 February 2020
A
Arthur7:20 PM
So, your website says that "stuff" is scheduled for Weds 5th Feb today
Currently I have today lost all channels on C51(714Mhz) and C52(722Mhz)
All other channel groups work just fine. Have retuned a number of times but clearly Emley Moor isn't
transmitting those two groups to my area as of today.
Any idea how long this work is going to take please?
| link to this comment |
C
Chris.SE7:48 PM
Arthur:
Arqiva should have completed the work at Emley Moor today on behalf of Freeview. All multiplexes have now moved to their final UHF channels. (The list at the top of this page is out of date as the site owner has not had time to make all the changes to all the transmitter listings).
The multiplexes that were on UHF C51 and C52 have now moved, COM7 has also moved from C32 - this was the whole point of the retune!
Emley's Multiplexes & UHF channels are now as follows, in the order -
PSBs1/BBCA, PSB2/D3&4, PSB3/BBCB HD, COM4/SDN, COM5/ArqA, COM6/ArqB, COM7 HD, COM8 HD, & Local
C47, C44, C41, C33, C36, C48, C55, C56, & C39.
I'd suggest that you unplug your aerial and carry out a retune which will clear all previous tuning as no channels will be found.
Plug the aerial back in and carry out a retune, then check your multiplexes are correctly tuned to those UHF channels. If not repeat, the initial clearance and then retune manually to those UHF channels.
| link to this comment |
C
Chris.SE11:25 PM
Richard caywood:
What local news programmes were you picking up on each set before today?
For the Upstairs set, I wondered whether you've got PSBs 1 & 2 mixed up. As for the other channels there's something of a mystery, except C51 & C52 are the old Emley COMs 4&5, and C48 is now Emley COM6.
I think first I'll list the Bilsdale ones for you in the same order as I've done for Emley in the previous post for Arthur.
Bilsdale C21, C24, C27, C43, C46, C40, C55, C56, C30. You can ignore the HD & Local ones C27, 55, 56 & 30.
As for the other channels I can't find any transmitters that you are likely to pick up with those numbers!
Maybe start with the Upstairs set, unplug the aerial and do an automatic tune to clear memory of all previous tuning.
Then carry out a manual tune for each of the Bilsdale UHF channels and see what %Signal & Quality you've got for each multiplex.
| link to this comment |
Thursday, 6 February 2020
hi. i have done a rescan without the aerial attached to wipe the memory of all channels and then did a retune theses are the results from the upstairs tv.
I have decided to use a seperate freeview box
this is a dion 8k bandwidth
psb1 uhf ch21 (682.000 mhz)
psb2 uhf ch24 (658.000mhz)
coms 4 uhf ch43 (594.000 mhz)
coms 5 uhf ch46 (570.000 mhz)
coms 6 uhf ch40 (690.000 mhz)
lls uhf ch55 (618.000 mhz)
coms 7 uhf ch56 (498.000 mhz)
coms 8 uhf ch30 (478.000 mhz)
signal and quality is holding signal 94% quality 84% upstairs
now the downstairs tv
psb 1 uhf ch21
psb 2 uhf ch24
coms 4 uhf ch36
coms 5 uhf ch33
coms 6/7 uhf ch48
coms 8 uhf ch 39
signal and quality is holding signal 100% quality 100% downstairs
u ask the question on what i receive for local news..... NE/C
hope this helps
| link to this comment |
i can also add that when the 6pm news comes on it changes to cumbria /tyne tees news
| link to this comment |
D
Dave Bates6:34 PM
Hi up until the December retune I could get BBC4 HD fine, after that I tried multiple retunes and finally tuned it on a very stormy day (Elmley Moor transmitter). It was only on rare times i could actually view it. (a few other channels such as cbeebies HD also disappeared but no great loss.)
After the February retune I was hoping i'd get it back as the transmitter was outputting at 51,200 W on channel 56 as opposed to 5 kw from a local transmitter since December apparently. Unfortunately I still can't get it. I use a horizontal oldish loft aerial. Is there any mileage in me getting an improved aerial ?
Thanks.
| link to this comment |
After much manual retuning the standard [not HD] channels for anyone in east Yorkshire pointing at Emley Moor are: 33 36 44 47 48
| link to this comment |
C
Chris.SE7:58 PM
Andrew:
All Emley's UHF channels are as I detailed them in my post yesterday at 7:48pm
| link to this comment |
C
Chris.SE8:04 PM
Dave Bates:
There was no retune at Emley in December, the previous one was 23rd October and the transmitter power was reduced to 47.86kW, but that small difference shouldn't have made any difference, it's more likely to have been the effect of the channel change from C34 to C56.
For your postcode (picked up from your other post), you should have no problem with any of the multiplexes from Emley, so yes, a new aerial may solve the problem, especially if your "oldish loft aerial" is a Group B with 10 or 14 elements and not a larger wideband or Group E, although a Group T aerial will do, a Group E might be better as it should have slightly better gain unless you have a more elaborate Wideband/Group T.
Do you know what aerial you have at present, how many elements it has (describe if need be)?
It's also worth checking its alignment which should be bearing 187 degrees, that's 7 degrees W of due S at your location.
It might also be worth you checking that you are correctly tuned to all Emley's UHF channels as listed in my post yesterday at 7:48PM.
| link to this comment |
C
Chris.SE8:38 PM
To be clear, in case anyone gets confused, the reduction in power to 47.86kW is for the COMs 7&8 multiplexes, the main multiplexes PSBs & COMs are all 174kW.
| link to this comment |
Select more comments
Your comment please