Full Freeview on the Beacon Hill (Torbay, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 50.446,-3.611 or 50°26'45"N 3°36'40"W | TQ3 1RT |
The symbol shows the location of the Beacon Hill (Torbay, England) transmitter which serves 84,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Beacon Hill (Torbay, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Beacon Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Beacon Hill transmitter?
BBC Spotlight 0.8m homes 2.9%
from Plymouth PL3 5BD, 37km west (262°)
to BBC South West region - 107 masts.
ITV West Country News (West) 0.8m homes 2.9%
from Plymouth PL7 5BQ, 30km west (260°)
to ITV West Country region - 107 masts.
All of lunch, weekend and 50% evening news is shared with West Country (East)
Are there any self-help relays?
Lannacombe | Active deflector | 25 km SW Torbay | 4 homes |
How will the Beacon Hill (Torbay, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2009 | 2009-13 | 2013-18 | 2013-17 | 27 Mar 2019 | |||
C/D E | C/D E | C/D E | E T | E T | W T | K T | |||
C33 | com7 | com7 | |||||||
C34 | com8 | com8 | |||||||
C40 | ArqB | ||||||||
C41 | D3+4 | ||||||||
C42 | SDN | SDN | SDN | SDN | |||||
C44 | BBCA | ||||||||
C45 | ArqA | ArqA | ArqA | ArqA | |||||
C47 | BBCB | ||||||||
C51tv_off | ArqB | ArqB | ArqB | ||||||
C53tv_off | C4waves | C4waves | C4waves | +D3+4 | +D3+4 | +D3+4 | |||
C57tv_off | BBC1waves | BBC1waves | BBC1waves | +BBCB | +BBCB | +BBCB | |||
C60tv_off | ITVwaves | ITVwaves | ITVwaves | -BBCA | -BBCA | ||||
C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Apr 09 and 22 Apr 09.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 100kW | |
BBCA, D3+4, BBCB | (-7dB) 20kW | |
SDN, ARQA, ARQB | (-10dB) 10kW | |
com7 | (-11.4dB) 7.3kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-17dB) 2kW | |
Mux C*, Mux D*, com8 | (-20dB) 1000W |
Local transmitter maps
Beacon Hill Freeview Beacon Hill AM/FM Beacon Hill TV region BBC South West West CountryWhich companies have run the Channel 3 services in the Beacon Hill transmitter area
|
|
Tuesday, 18 October 2011
M
Mike Dimmick2:41 PM
Chrisonahill: And C42 and C45 are also adjacent to the PSB transmissions from Weymouth and Charmouth transmitters.
link to this comment |
Tuesday, 25 October 2011
C
Chrisonahill8:49 AM
Mike, thanks for that. I'm surprised Rowridge prediction is so significant. Local topography here definitely favours Beacon Hill - almost line of sight despite the distance - and is against Rowridge, less favourable to Stockland than Beacon but Stockland closer and more power. The situation is not the same throughout this postcode. I guess we'll have to experiment.
link to this comment |
Saturday, 21 January 2012
F
frank ellis11:44 AM
Buckfastleigh
i have a brand new humax pvr-9300t recorder box and am experiancing intermittant picture and sound freezing on some freeview channels any advice please
link to this comment |
frank's: mapF's Freeview map terrainF's terrain plot wavesF's frequency data F's Freeview Detailed Coverage
J
jb381:38 PM
frank ellis: Well the first thing to consider is if when you first tuned the box in it has picked up multiplexes from different stations, as you are indicated as being to receive signals from more than one station, some of being better than others.
Another important factor is, that depending on your aerial set up you could be receiving an excessive level of signal, this more likely from Beacon Hill, so have a look up at your aerial and if its horizontally mounted its Beacon Hill whereas if vertical its your local station at less than one mile away.
A simple way to test for an over powerful signal being to check the result when using a set top aerial, or if not available then with a short piece of wire pushed into the inner of the Humax's aerial socket.
If this gives a reasonable picture then an in-line attenuator is required in your co-ax lead, if though the signal isn't excessive then you will have to factory reset your Humax and use manual tuning for the station required, info given dependant on aerial direction / mounting.
link to this comment |
Sunday, 22 January 2012
frank ellis: Also see Freeview intermittent interference | ukfree.tv - independent free digital TV advice please.
link to this comment |
Wednesday, 15 February 2012
J
john8:17 PM
hello i receive my tv from the beacon hill mast, i can see the mast out of my window about 1-2 miles away so i have a very good signal but my ITV1+1 channel is wales the signal is very strong and its the same with either my freeview tv or freeview set top box so i am a bit confused
link to this comment |
K
KMJ,Derby9:25 PM
john: ITV1+1 in the Westcountry region is currently ITV1 Wales, as you have observed. This is because there are a limited number of regions fitted with equipment for the ITV1+1 service. A similar situation exists with regard to the ITV1 HD service, regions not yet upgraded for HD take the service from a region that is suitably equipped. Remember that to increase the number of ITV1+1 and ITV1HD feeds would require extra capacity on satellite if the services are to be made available on all platforms, thereby increasing the transmission costs, which ITV are understandably not in a hurry to do.
link to this comment |
Monday, 27 February 2012
john: In addition to the above comments, see ITV1+1, ITV1HD, BBC One HD regional services on Freeview | ukfree.tv - independent free digital TV advice please.
link to this comment |
A
Andrew Grant12:52 PM
I was looking on this site to find details of the aerial specification I need for receiving transmissions from the Beacon Hill mast. Due to planning requirements I must use an indoor aerial and have one mounted in my loft area, but I suspect it's a 'cheapy' and thought that a good quality replacement might help with the poor signal quality & strength I experience. However, I see that there is some speculation that transmissions from Beacon Hill are due to change and will require a 'wideband' (whatever that is) aerial, if this is so I'd be a chump to buy a new aerial now only for it to become redundant later this year. Does anyone know if this is true, and what constitutes a good quality aerial anyway?
Maqny thanks
link to this comment |
Andrew Grant: For advice on this stuff and products too, have a look at ATV Sheffield: www.aerialsandtv.com
Specifically, look at aerial groups:
Aerials, TV Aerial and Digital Aerial
How does your current aerial fair?
Check out the Digital UK Tradeview predictor for some guidance. If you supply your location (preferably in the form of a post code), we might be able to offer suggestions.
Basically, in the days of four-channel analogue, Beacon Hill was a Group C/D (roughly top third of the band of frequencies used for TV). Whilst the Public Service Broadcaster (PSB) multiplexes still are, the lower two of the commercial (COM) ones are in Group B (middle third of the band).
Due to the fact that many aerials fitted to homes will have been Group C/D, the lower COMs may now necessitate replacement aerials.
If your aerial is a DIY one, I think it's fairly certain to be a wideband one. If you can work out which it is might be useful.
ATV has listed its suggestions for Beacon Hill:
Digital TV Transmitters
link to this comment |
Select more comments
Your comment please