Full Freeview on the Belmont (Lincolnshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.335,-0.172 or 53°20'7"N 0°10'20"W | LN8 6JT |
The symbol shows the location of the Belmont (Lincolnshire, England) transmitter which serves 710,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Belmont transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Belmont transmitter?
BBC Look North (Hull) 0.7m homes 2.7%
from Hull HU1 3RH, 47km north-northwest (346°)
to BBC East Yorkshire and Lincolnshire region - 4 masts.
ITV Calendar 0.7m homes 2.7%
from Leeds LS3 1JS, 106km west-northwest (299°)
to ITV Yorkshire (Belmont) region - 4 masts.
All of lunch, weekend and 80% evening news is shared with Emley Moor region
How will the Belmont (Lincolnshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 4 Mar 2020 | ||||
VHF | A K T | W T | W T | W T | W T | ||||
C7 | ITVwaves | ||||||||
C13 | BBCtvwaves | ||||||||
C22 | BBC1waves | BBC1waves | BBC1waves | BBCA | BBCA | ||||
C23 | ArqA | ||||||||
C25 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C26 | ArqB | ||||||||
C27 | LDN | ||||||||
C28 | BBC2waves | BBC2waves | BBC2waves | BBCB | BBCB | ||||
C30 | -SDN | SDN | |||||||
C32 | C4waves | C4waves | C4waves | _local | |||||
C33 | com7 | ||||||||
C35 | com8 | ||||||||
C53tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | C5waves | C5waves | COM8tv_off | ||||||
C60tv_off | -ArqB |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 3 Aug 11 and 17 Aug 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-5.2dB) 150kW | |
ARQA, ARQB | (-7dB) 100kW | |
Analogue 5, SDN | (-10dB) 50kW | |
com8 | (-10.9dB) 40.9kW | |
com7 | (-11.3dB) 37.1kW | |
Mux 2* | (-14dB) 20kW | |
Mux 1*, Mux A*, Mux B* | (-17dB) 10kW | |
LDN | (-20dB) 5kW | |
Mux C*, Mux D* | (-21dB) 4kW |
Which companies have run the Channel 3 services in the Belmont transmitter area
|
|
Saturday, 21 November 2015
M
MikeP3:37 PM
Trowbridge
Jean Pocklington :
It would assist contributors if you provided a post code so we could investigate the transmission path from your preferred transmitter to your location.
As your neighbour appear to also suffer the same problem it is likely that there is some common factor.
Unfortunately, Holiday TV is not listed above, but it may well be amongst the 'other' channels (clicking on the 'link' does not show what 'other' actually refers to). It is just possible that it may be being transmitted on an HD multiplex (though without any clear listing it is difficult to be sure) in which case you will need a full HD TV (not just an 'HD Ready' type).
link to this comment |
MikeP's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Thursday, 17 December 2015
S
Syd7:53 PM
I have undertaken all reset procedures.
Is the freeview channel listing at the top of this site accurate ?.
I can only receive 106 & 107 from the com7 listing for CH33... none of the others listed appear on my freeview box
Is this because the listing is incorrect or can there be a technical reason? I am obviously receiving the 2 channels ok and signal is ok
If the freeview channel listing is incorrect where do I find an accurate one...
link to this comment |
J
jb3811:32 PM
Syd: Did the procedures referred to include a "manufacturers reset"'?, also known as "default setting" - "first time installation" etc, as I carried out a manual scan on Mux33 and all 15 or so channels came up perfectly OK, albeit a bit on the intermittent side as Stamford (@ 53miles from Belmont) is not really covered by this station.
link to this comment |
Thursday, 4 February 2016
J
Josh 6:31 PM
How long do sky mini dishes last for and freesat dishes .
link to this comment |
J
Josh 6:32 PM
In the north west of England .
I'm worried my freesat dish won't last long .
link to this comment |
MikeP
10:09 PM
10:09 PM
Josh :
How old is your dish? Most will last more than 10 years and good ones probably longer. Before I moved I'd had one in place for over 22 years!.
link to this comment |
Sunday, 14 February 2016
A
Alan Hudnott9:17 AM
i have recently purchased a panasonic 48cx350b t.v....in the morning its impossible to get channels 37, 38 and most of the freeview hd channels (except bbc), if i turn on the pvr and watch through that then the channels are all there....i watch through the belmont transmitter and normally have a perfect picture...is the transmitter power reduced in the morning?..is the freeview reciever in the tv not as good as the pvr one?...any other ideas please...
link to this comment |
J
jb385:01 PM
Alan Hudnott: Although Belmont is indeed presently listed in the planned engineering section warning of a possible weak signal, the fact of you being able to view the missing channels via the PVR is inclined to indicate that the signal is being further reduced by the method used to connect the aerial into the TV, as variations in sensitivity between tuners does not generally have such a dramatic effect as you are experiencing.
If the TV's aerial input is fed via being looped through the PVR? try connecting the aerial directly into the TV, if this action rectifies the problem then make sure that the PVR is not set on "economy" mode, as this setting in most PVR's disables the aerial loop though facility in standby.
If of course the TV and PVR's aerial sockets are fed separately via a two way splitter? then that said obviously does not apply.
link to this comment |
Monday, 4 April 2016
B
Bob2:56 PM
Hi, I live in Sheffield but all around my area we recieve signals for freeview from the Belmont transmitter, can anyone tell me during the last 6 weeks or so I get a remapping message to update my tv nearly every other day when I turn on my tv when I arrive home from work .
I always install the update to be sure I just wonder if other people are having this issue.
Many thanks in advance.
Bob.
link to this comment |
Wednesday, 20 April 2016
W
Will Snell9:22 PM
Bridlington
Signal started going last night on some channels last night, and tonight around 7 for afew mins on main channels, now after 9pm gone on all channels, signal strength is about 7/10 signal quality is zero,
Bridlington YO16 6FH.
Says no faults or engineering works on belmint, god knows why we pay a tv licence.
link to this comment |
Will's: mapW's Freeview map terrainW's terrain plot wavesW's frequency data W's Freeview Detailed Coverage
Select more comments
Your comment please