Full Freeview on the Belmont (Lincolnshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 53.335,-0.172 or 53°20'7"N 0°10'20"W | LN8 6JT |
The symbol shows the location of the Belmont (Lincolnshire, England) transmitter which serves 710,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Belmont transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Belmont transmitter?
BBC Look North (Hull) 0.7m homes 2.7%
from Hull HU1 3RH, 47km north-northwest (346°)
to BBC East Yorkshire and Lincolnshire region - 4 masts.
ITV Calendar 0.7m homes 2.7%
from Leeds LS3 1JS, 106km west-northwest (299°)
to ITV Yorkshire (Belmont) region - 4 masts.
All of lunch, weekend and 80% evening news is shared with Emley Moor region
How will the Belmont (Lincolnshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 4 Mar 2020 | ||||
VHF | A K T | W T | W T | W T | W T | ||||
C7 | ITVwaves | ||||||||
C13 | BBCtvwaves | ||||||||
C22 | BBC1waves | BBC1waves | BBC1waves | BBCA | BBCA | ||||
C23 | ArqA | ||||||||
C25 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C26 | ArqB | ||||||||
C27 | LDN | ||||||||
C28 | BBC2waves | BBC2waves | BBC2waves | BBCB | BBCB | ||||
C30 | -SDN | SDN | |||||||
C32 | C4waves | C4waves | C4waves | _local | |||||
C33 | com7 | ||||||||
C35 | com8 | ||||||||
C53tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | C5waves | C5waves | COM8tv_off | ||||||
C60tv_off | -ArqB |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 3 Aug 11 and 17 Aug 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-5.2dB) 150kW | |
ARQA, ARQB | (-7dB) 100kW | |
Analogue 5, SDN | (-10dB) 50kW | |
com8 | (-10.9dB) 40.9kW | |
com7 | (-11.3dB) 37.1kW | |
Mux 2* | (-14dB) 20kW | |
Mux 1*, Mux A*, Mux B* | (-17dB) 10kW | |
LDN | (-20dB) 5kW | |
Mux C*, Mux D* | (-21dB) 4kW |
Which companies have run the Channel 3 services in the Belmont transmitter area
|
|
Thursday, 21 April 2016
A
Angela Thompson7:30 PM
Bridlington in East Yorkshire is having lots of problems, over the last 3 days.
No signal for long periods of time.
Can rectify the problem please.
link to this comment |
Friday, 22 April 2016
K
KMJ,Derby9:24 AM
Angela Thompson: the William Hepburn's tropospheric ducting forecast for Europe shows that it is highly likely that reception in Eastern parts of England is currently being influenced by signals from The Netherlands and/or Germany. I noticed yesterday morning on FM radio that there was a radio station playing German music on an adjacent frequency to BBC Radio Derby received here in South Yorkshire. Reception should return to normal when there is a change in weather conditions.
link to this comment |
Monday, 23 May 2016
W
Will snell10:30 PM
Yo16 bridlington.
Just gone 10pm tonight and all channels gone'. No signal at all .
link to this comment |
Tuesday, 24 May 2016
M
MikeB4:13 PM
Will snell: Since Belmont has no reported problems, its probably your system. Check cables, etc - probably a connection has failed, etc.
link to this comment |
MikeB's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Friday, 27 May 2016
D
dave 5:58 PM
Hello I recently had freesat installed I'm wondering if I have a good signal or not and I have had problems with my box freezing and stuff . My signal level at the lowest is 80% signal and 100% quality. But on some channels it's 91% signal and 100% quality where's the rest are 80 % signal I have had a little break up but it's rare and only happens for a few seconds on freeview i got break up all the time . I'm also wondering if there's any plan to put home channel and Dave and quest on freesat in the near future? .
link to this comment |
Saturday, 28 May 2016
D
dave 8:57 AM
I'm worried because I thought signal strength should always be 100% as well as quality.
link to this comment |
MikeP
1:54 PM
Trowbridge
1:54 PM
Trowbridge
Dave:
For Freeview, your signal strength should never be 100%! It is better if it is between 60% and 80% but with quality as high as possible. On Freeview, a strength of 100% is almost certain to give picture and sound problems as it is too strong.
Freesat does not come from the Belmont transmitter but from a group of satellites in geo-stationery orbit above the Equator, roughly over East Africa. A dish is required for such reception, so I assume from your post that you have a dish and suitable Freesat receiver. Again, 100% signal strength is not ideal and is very rare, but the quality should be as high as possible (noting that a stronger signal may actually reduce the quality!).
link to this comment |
MikeP's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
J
jb388:38 PM
dave : If everything you have said preceding - "on freeview i got break up all the time" - is referring to Freesat signal levels? then variation in levels between channels is quite normal, as jumping about satellite channels not only involves receiving signals broadcast on different polarities but also from different transponders, i.e: the satellite equivalent of transmitter.
As far as your box freezing etc, if the previously mentioned "is" applicable i.e: Freesat, although the signal levels given are perfectly OK, try observing one of the channels for at least a minute or so watching for any signs of intermittent dips in quality, as this can result in intermittent freezing of the picture / audio squeaks etc, if evident? then the problem could be caused by a less than perfect fitting of the "F" connector at each end of the coax.
Another possible reason, being that the satellite dish has been positioned where it doesn't have a completely clear view of the S/SE skyline and is being intermittently obstructed by tree foliage etc. (usually shows up more on windy days)
That said, some Freesat boxes (Bush / Goodmans etc) have a reputation for glitching for no apparent reason, maybe you could mention the brand you happen to be using?
link to this comment |
Monday, 6 June 2016
W
Will snell8:25 AM
Tv channels went off last night just after 9pm , just got up put tv on and no signal still. ,
link to this comment |
Intermittent complete signal loss. A quick check at Facebook and it would appear that everyone else in Beverley, East Yorkshire, is experiencing the same problems. So why on earth does this site still state that there are 'no problems reported?
link to this comment |
Select more comments
Your comment please