Full Freeview on the Mendip (Somerset, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 51.237,-2.626 or 51°14'12"N 2°37'33"W | BA5 3LB |
The symbol shows the location of the Mendip (Somerset, England) transmitter which serves 720,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Mendip transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Mendip transmitter?
![regional news image](/styles/images/regionalnews/302x152/itv-west-west.jpg)
ITV West Country News (East) 0.9m homes 3.4%
from Bristol BS4 3HG, 23km north (11°)
to ITV West region - 61 masts.
All of lunch, weekend and 50% evening news is shared with West Country (West)
Are there any self-help relays?
Cheddar | Transposer | 15 km E Weston-super-Mare | 1674 homes |
Luccombe | Active deflector | 6 km w Minehead | 38 homes |
How will the Mendip (Somerset, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2010 | 2010-13 | 2013-18 | 2013-17 | 27 Feb 2018 | |||
C/D E | E | E | C/D E | C/D E T | W T | W T | |||
C30 | _local | ||||||||
C32 | BBCA | ||||||||
C33 | com7 | com7 | |||||||
C34 | D3+4 | ||||||||
C35 | com8 | com8 | |||||||
C36 | ArqB | ||||||||
C37 | C5waves | C5waves | |||||||
C48 | SDN | SDN | SDN | SDN | |||||
C49tv_off | BBCA | BBCA | |||||||
C51tv_off | LBS | LBS | |||||||
C52tv_off | ArqB | ArqB | ArqB | ||||||
C54tv_off | C4waves | C4waves | C4waves | D3+4 | D3+4 | D3+4 | |||
C55tv_off | com7tv_off | ||||||||
C56tv_off | ArqA | ArqA | ArqA | COM8tv_off | |||||
C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCB | BBCB | BBCB | |||
C61 | ITVwaves | ITVwaves | ITVwaves | BBCA | |||||
C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 24 Mar 10 and 7 Apr 10.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
Analogue 5 | (-6dB) 126kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 100kW | |
com7 | (-8.4dB) 72.4kW | |
com8 | (-8.6dB) 69.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D*, LBS | (-17dB) 10kW |
Which companies have run the Channel 3 services in the Mendip transmitter area
|
|
Wednesday, 17 January 2018
S
StevensOnln17:15 PM
Graham: As you've posted on the Mendip page, presumably you are talking about receiving ITV Central HD on Freeview. This is because ITV currently only transmit four of their regions in HD on Freeview in England (London, Meridian, Central and Granada). More ITV HD regions are available on satellite, but as ITV HD is broadcast on Freeview capacity belonging to the BBC, we probably won't see any further ITV HD regions being made available via Freeview until the BBC are in a position to start broadcasting regional versions of BBC One HD (both are broadcast on the PSB3 multiplex which is owned/operated by the BBC).
link to this comment |
Thursday, 18 January 2018
T
TimH2:58 AM
No COM7 or COM8 (UHF chs 33 and 35) at the moment (~3am), are they off at night time for engineering work? COM7 was fine earlier today. I see that they will disappear at the end of March this year, perhaps that is related. Other muxes e.g. the man HD mux (ch58) are fine.
link to this comment |
S
StevensOnln110:39 AM
TimH: It would be very unusual for any engineering work to take place overnight (unless there was a fault). COM7 & COM8 are not closing in March, they are moving to form a national single frequency network (SFN) on UHF channels 55 & 56 (where they will remain until some time between 2020 and 2022), although according to Digital UK those changes aren't happening at Mendip until Spring 2019. Several multiplexes will change frequencies around the same time (although it looks like this will happen in three steps on different dates). The only changes taking place at Mendip this year are that COM5 will move to UHF 33 and COM7 will temporarily move to UHF 36 on 27th February.
link to this comment |
J
John Sykes9:28 PM
we have a Philips HD pvr HDT 8520 working off Mendip: all channels OK and decodable, including CH33. It lost the mux which includes BBC4 HD, so I ended up doing a factory reset and retuning. It pauses to ask which network to choose: "West" (116 tv's) or "Com78 National" (28). You can't choose both. If I select "West", it then puts the BBC4 HD mux channels up in the 815 channel area with no metadata to enable program recording. If I choose "Com78 National" we have the correct channel numbering for BBC4 HD (106) and the other HD channels in Ch33 mux, but not for the normal BBC1/ITV/Ch4 hd's etc, which end up with no metadata, numbered in the 200's I think. Can something be done to make the networks converge? There must hae been a change incompatible with with the box's firmware?
link to this comment |
Friday, 19 January 2018
T
TimH4:10 AM
StevensOnln1: both muxes were back again this morning (of 18/1/18) and are still ok now at 4am with nothing done to my setup to bring that about - the STB signal level meter showed zero when they were out and now it back to the good level they have always had in the past. Thanks for the information about the COM7/8 changes, this information seems to be in conflict with the chart above regarding what happens after 31/3/18 where COM7/8 currently disappear.
link to this comment |
S
StevensOnln110:16 AM
TimH: The chart seems to be based on the frequencies which will be cleared for used at Mendip following completion of the 700MHz clearance in mid 2020. It doesn't show the interim shuffling of muxes to reach that final outcome as these details were only recently announced, nor does it show COM7/COM8 at their new homes in the 700MHz band as these frequencies will be auctioned off to the mobile networks at some stage and will cease being available for broadcast use (although no firm date has been announced for when COM7 & COM8 will close).
link to this comment |
S
StevensOnln110:17 AM
John Sykes: Does your PVR have a manual tuning function? If so, select the West region then try manually tuning COM7 on UHF channel 33 and COM8 on 35.
link to this comment |
J
John Sykes12:30 PM
StevensOnln1:
No, you can only select either West or Com78 National during tuning. In either case all 140 TV channels are "tuned", but those with the "wrong" region do not have any information attached so you can't record them from the epg. Perhaps this will be resolved when the next frequency shift takes place?
link to this comment |
S
StevensOnln112:50 PM
John Sykes: The new Com78 National has been created because the COM7 & COM8 muxes are becoming a single frequency network (SFN) and therefore need to have identical broadcasts, therefore each transmitter has to broadcast the same region information for COM7 & COM8. I would suggest contacting Philips technical support as this will presumably affect anyone else using that model who can receive COM7/COM8 and may lead to Philips issuing a firmware update if there are a large number of affected users.
link to this comment |
J
John Sykes3:00 PM
StevensOnln1:
Re "Philips technical support as this will presumably affect anyone else using that model who can receive COM7/COM8 and may lead to Philips issuing a firmware update if there are a large number of affected users."
Yes, with some difficulty I've done that: the chances are remote! The email address to report this to Philips is
reception@xgem.com
John
link to this comment |
Select more comments
Your comment please