Full Freeview on the Pontop Pike (County Durham, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 54.868,-1.771 or 54°52'5"N 1°46'15"W | DH9 9AT |
The symbol shows the location of the Pontop Pike (County Durham, England) transmitter which serves 700,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Pontop Pike (County Durham, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Pontop Pike transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Pontop Pike transmitter?
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 15km northeast (42°)
to BBC North East and Cumbria region - 70 masts.
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 12km north-northeast (29°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
Kieldor Dam | Active deflector | 6 homes Holiday complex | |
Low Haber | Active deflector | West Allen Dale, 18 kn SW Hexham | caravan site |
North Hartlepool | Transposer | 84 homes |
How will the Pontop Pike (County Durham, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | ||||
VHF | C/D E | C/D E | C/D E | C/D E T | W T | ||||
C5 | BBCtvwaves | ||||||||
C32 | SDN | ||||||||
C33 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | ArqB | ||||||||
C39 | BBCA | ||||||||
C42 | D3+4 | ||||||||
C45 | BBCB | ||||||||
C49tv_off | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C54tv_off | C4waves | C4waves | C4waves | D3+4 | |||||
C55tv_off | ArqB | com7tv_off | |||||||
C56tv_off | LNE | ||||||||
C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCA | |||||
C59tv_off | ArqA | ||||||||
C61 | ITVwaves | ITVwaves | ITVwaves | ||||||
C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
com8 | (-11.6dB) 34.6kW | |
com7 | (-11.7dB) 33.8kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 10kW | |
LNE | (-20dB) 5kW |
Local transmitter maps
Pontop Pike Freeview Pontop Pike TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Pontop Pike transmitter area
|
|
Saturday, 5 February 2011
M
mal2:23 PM
Thanks for your help. HD channels have now returned at half signal strengh at very low quality. It may well be the weather. Will try fine tuning my aerial. Thanks again.
link to this comment |
mal: This problem will not occur as often after switchover.
link to this comment |
Monday, 7 February 2011
M
mike7:16 PM
Hi
Have just tried to install topup tv and picture in the main is rubbish, pixelation on most channels. Have sky sports channel and cannot even get QVC (Channel 16) for it to activate through. Am on Pontop Pike, how can I check if it's powered down because of engineering work? Topup TV say it is but is this passing the buck?
Mike
link to this comment |
mike: As above, there is no TV engineering work. TUTV are indeed "passing the buck".
link to this comment |
Monday, 28 February 2011
L
Len Adams2:25 PM
Washington
My ITV reception from Pontop Pike keeps breaking up. Picture sometimes freezes.
This happens at infrequent times of the day and not every day. I used to switch on to BT Vision box and this cleared it up but that is even causing problems now.
BBC reception is first class.
Please help if possible
link to this comment |
Len's: mapL's Freeview map terrainL's terrain plot wavesL's frequency data L's Freeview Detailed Coverage
Len Adams: Please can you see Freeview intermittent interference | ukfree.tv - independent free digital TV advice for help?
link to this comment |
Monday, 28 March 2011
M
mr deller5:41 PM
Newcastle Upon Tyne
my ch 3- 4- 5- 11- and some other channels. have become very pixalated and unwatchable within the last week. are you working on the transmitter or would it be a fault with my set. many thanks
link to this comment |
mr's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Wednesday, 30 March 2011
mr deller: Please see, as it says above, Single frequency interference | ukfree.tv - independent free digital TV advice .
link to this comment |
Monday, 11 April 2011
T
Tony9:05 PM
I'm experiencing a sound issue with BBCHD at the moment on my Sony KDL TV. I see from the Sony's info screen that the format is changing quite regularly between 1080i and 1080p and when this occurs I'm getting an audio drop out. Why is the format frequently changing mid-programme? Is this a temporary broadcast experiment? Should the TV be seamlessly changing formats? Either way BBCHC for me is unwatchable with the high number of audio drop-outs which I'm totally unhappy about.
link to this comment |
Tuesday, 12 April 2011
Tony: From BBC - Research and Development: Software Upgrade for BBC HD on Freeview HD :
The Freeview HD platform has always been specified to provide a 1080p25 capability. This is why STBs are mandated to have a 1080p50 output to enable seamless up-conversion to a mode which is guaranteed to be present in all display devices. A great deal of material is shot natively at 1080p25 and there are significant advantages in maintaining 1080p25 through to the viewer's display. Within a single programme interlaced may be used for moving credits, cross-fades and studio shots whereas progressive may be used for location shot material.
Up until now this capability has not been exploited and 1080p25 material was encoded using a 1080i25 encoding mode. But after a software upgrade on the 22nd/23rd March the HD encoder supporting BBC HD on Freeview HD has been set-up to automatically detect progressive material and change
encoding mode appropriately. The encoded bitstream can only change at each GOP boundary to ensure decoders maintain a consistent display. This means that each coded video sequence either contains interlaced or progressive pic_struct values within the bitstream. The transitions between interlaced and progressive modes are entirely dependent upon how a programme has been made.
link to this comment |
Select more comments
Your comment please