Full Freeview on the Sandy Heath (Central Bedfordshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 52.130,-0.242 or 52°7'47"N 0°14'33"W | SG19 2NH |
The symbol shows the location of the Sandy Heath (Central Bedfordshire, England) transmitter which serves 920,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Sandy Heath transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Sandy Heath transmitter?
BBC Look East (West) 1.0m homes 3.7%
from Cambridge CB4 0WZ, 29km east-northeast (65°)
to BBC Cambridge region - 4 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 1.0m homes 3.7%
from Norwich NR1 3JG, 119km east-northeast (60°)
to ITV Anglia (West) region - 5 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (East)
How will the Sandy Heath (Central Bedfordshire, England) transmission frequencies change over time?
1965-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 12 Feb 2020 | ||||
VHF | A K T | K T | K T | W T | W T | ||||
C6 | ITVwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +BBCB | BBCB | ||||
C24 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C32 | com7 | ||||||||
C33 | SDN | ||||||||
C34 | com8 | ||||||||
C35 | _local | ||||||||
C36 | ArqA | ||||||||
C39 | C5waves | C5waves | |||||||
C43 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | SDN | ||||||||
C52tv_off | ArqA | ||||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 30 Mar 11 and 13 Apr 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 1000kW | |
BBCA, D3+4, BBCB | (-7.4dB) 180kW | |
SDN, ARQA, ARQB | (-7.7dB) 170kW | |
com7 | (-13dB) 49.6kW | |
com8 | (-13.1dB) 49.1kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 20kW | |
Analogue 5 | (-20dB) 10kW |
Which companies have run the Channel 3 services in the Sandy Heath transmitter area
|
|
Thursday, 10 April 2014
D
DemThonp8:55 PM
Blackpool
There are houses in the way . But I live on an estate so I can't get anywhere without houses
link to this comment |
DemThonp's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
J
jb389:22 PM
DemThonp: Typo error! Winter Hills HD service is C54 and "not" C57.
link to this comment |
D
DemThonp10:44 PM
Blackpool
Is 50-60% quality good . Because on BBC 1.234 .and ITV and CH 4 . Are 50 to 60 % . Is that a good signal
link to this comment |
DemThonp's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
Friday, 11 April 2014
J
jb388:25 AM
DemThonp: No!. The channel numbers you have given correspond to that being used by two different stations, namely Lancaster and Moel-Y-Parc, neither of indicated as providing the best signal in your area. Nearly all of the aerials seen in the Falkirk Avenue area are pointing towards Winter Hill, therefore you should delete everything stored in your TV tuners memory by removing the aerial followed by carrying out an auto-tune, reconnecting the aerial on completion to ensure that "no signal" is indicated if you try to select a channel Should this be the case, then the next stage is to go into your TV's tuning menu / "manual" tune / and enter the following channel numbers "one at a time" followed by scanning each of them in turn and storing the results. Winter Hills channels being / C50 (BBC) - C59 (ITV) - C54 (HD) - C58 (ITV3 etc) - C49 (Pick TV etc) - C55 (4Music etc) - C31 (this being the new COM7 HD service)
link to this comment |
Sunday, 13 April 2014
H
hector3:04 PM
Is 60% signal quality good . Most channels apart from HD ones which is odd because my TV has free view HD built in . So is 60% quality OK . Its on an. Indoor aerial
link to this comment |
H
hector3:06 PM
I get all channels at 60% quality . Apart from HD channels but my TV is free view HD . Is 60% quality OK and could you boost up CH 21 and CH 32
link to this comment |
J
jb389:09 PM
hector: 60% is at the lower end of what is considered acceptable as far as the reception level of "quality" is concerned, however when you say that all channels are 60% apart from the HD channels are you meaning that nothing is being received on HD?, because should this be the case then are you sure that your TV is not just a Freeview HD ready model? as these types can only display and HD image from some externally connected source as their tuners are not capable of receiving it, HD reception requiring a TV or box to be fitted with a DVB-T2 tuner and "not" simply DVB-T as used for normal SD reception.
If you have the instruction manual for your TV have a look in the specifications section / tuner and check what's mentioned under that heading.
Should you experience any problem in finding this info, if you come back with the model number of the TV in question this can be checked out for you.
link to this comment |
H
hector9:33 PM
Yes my TV is freeview hd and my I can't get HD channels at all . Because the quality is so low . So 60% quality is OK then . It breaks up sometimes
link to this comment |
J
jb3811:28 PM
hector : Well, although 60% quality cannot really be said as being ideal, it can however be perfectly OK on many devices provided that its observed to be completely stable if monitored over a minute or so, 80% + quality being a far more desirable level and with the signal strength usually lagging slightly under this.
If you have positively verified that your TV is indeed fitted with a DVB-T2 tuner? then its unusual "not" to be receiving anything at all on HD, therefore in order to get a better idea as to the cause of the problem maybe you could provide your location, this preferably being in the form of a post code or one from somewhere nearby, e.g: a shop / Post Office, plus also a run down on the aerial system you are using.
link to this comment |
Monday, 14 April 2014
H
hector5:31 PM
Thanks . And houses block my tv aerial that's why my HD channels are weak and can't show a video . Can you get someone to boast sandy heath up it would make me happy . I'm very unwell right now plus I have autism . I really could do with my channels not breaking up .
link to this comment |
Select more comments
Your comment please