menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Full Freeview on the Tacolneston (Norfolk, England) transmitter

first published this on - UK Free TV
sa_streetviewGoogle Streetviewsa_gmapsGoogle mapsa_bingBing mapsa_gearthGoogle Earthsa_gps52.518,1.139 or 52°31'6"N 1°8'22"Esa_postcodeNR16 1DW

 

The symbol shows the location of the Tacolneston (Norfolk, England) transmitter which serves 330,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.

Are there any planned engineering works or unexpected transmitter faults on the Tacolneston (Norfolk, England) mast?

Tacolneston transmitter - Tacolneston transmitter: Possible effect on TV reception week commencing 25/11/2024 Pixelation or flickering on some or all channels Digital tick


Choose from three options: ■ List by multiplex ■ List by channel number ■ List by channel name
_______

Which Freeview channels does the Tacolneston transmitter broadcast?

If you have any kind of Freeview fault, follow this Freeview reset procedure first.

Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.

MuxH/VFrequencyHeightModeWatts
PSB1
BBCA
 H max
C40- (625.8MHz)263mDTG-100,000W
Channel icons
1 BBC One (SD) East, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, plus 16 others

PSB2
D3+4
 H max
C43- (649.8MHz)263mDTG-100,000W
Channel icons
3 ITV 1 (SD) (Anglia (East micro region)), 4 Channel 4 (SD) South ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 South ads, 18 More4, 26 ITV4, 28 ITVBe, 30 E4 +1, 35 ITV1 +1 (Anglia east), 71 That’s 60s,

PSB3
BBCB
 H max
C46 (674.0MHz)263mDTG-100,000W
Channel icons
46 5SELECT, 101 BBC One HD East, 102 BBC Two HD England, 103 ITV 1 HD (ITV Meridian Southampton), 104 Channel 4 HD South ads, 105 Channel 5 HD, 106 BBC Four HD, 107 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others

COM4
SDN
 H max
C42 (642.0MHz)263mDTG-8100,000W
Channel icons
20 U&Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 38 Channel 5 +1, 41 Legend, 42 GREAT! action, 57 U&Dave ja vu, 58 ITV3 +1, 59 ITV4 +1, 64 Blaze, 67 TRUE CRIME, 68 TRUE CRIME XTRA, 81 Blaze +1, 83 Together TV, 91 WildEarth, 93 ITVBe +1, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, 251 Al Jazeera English, 255 FRANCE 24 (in English), 265 Rok Sky +1, plus 29 others

COM5
ArqA
 H max
C45 (666.0MHz)246mDTG-8100,000W
Channel icons
11 Sky Mix, 17 Really, 19 U&Dave, 31 E4 Extra, 36 Sky Arts, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 60 U&Drama +1, 65 That's TV 2, 70 Quest +1, 74 &UYesterday +1, 76 That's TV 2 MCR, 233 Sky News, plus 13 others

COM6
ArqB
 H max
C39+ (618.2MHz)246mDTG-8100,000W
Channel icons
12 Quest, 25 U&W, 27 U&Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 52 GREAT! christmas, 56 That's TV (UK), 63 GREAT! romance mix, 73 HobbyMaker, 75 That's 90s, 82 Talking Pictures TV, 84 PBS America, 235 Al Jazeera Eng, plus 18 others

LNR
 H -10dB
C32 (562.0MHz)263mDTG-1210,000W
Channel icons
7 Mustard,

DTG-8 64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)

Which BBC and ITV regional news can I watch from the Tacolneston transmitter?

regional news image
BBC Look East (East) 0.8m homes 3.2%
from Norwich NR2 1BH, 16km northeast (37°)
to BBC East region - 27 masts.
70% of BBC East (East) and BBC East (West) is shared output
regional news image
ITV Anglia News 0.8m homes 3.2%
from NORWICH NR1 3JG, 16km northeast (38°)
to ITV Anglia (East) region - 26 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (West)

Are there any self-help relays?

Gt YarmouthTransposer1 km S town centre30 homes
Lowestoft (2)TransposerRotterdam Rd125 homes

How will the Tacolneston (Norfolk, England) transmission frequencies change over time?

1950s-80s1984-971997-981998-20112011-132013-182013-1717 Jul 2018
VHFC/D EC/D EC/D EEE TW TW T
C3BBCtvwaves
C31com7com7
C32_local
C37com8com8
C39 +ArqB+ArqBArqB
C40BBCA
C42SDNSDNSDNSDN
C43D3+4
C45ArqAArqAArqAArqA
C46BBCB
C50tv_off BBCBBBCB
C52tv_offC5wavesC5waves
C55tv_offBBC2wavesBBC2wavesBBC2waves-BBCA-BBCA-BBCAcom7tv_off
C56tv_offCOM8tv_off
C57tv_offLNRLNR
C59tv_offITVwavesITVwavesITVwaves-D3+4-D3+4-D3+4
C62BBC1wavesBBC1wavesBBC1wavesBBCB
C65C4wavesC4wavesC4waves

tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 9 Nov 11 and 23 Nov 11.

How do the old analogue and currrent digital signal levels compare?

Analogue 1-4 250kW
SDN, ARQA, ARQB, BBCA, D3+4, BBCB(-4dB) 100kW
com7(-9.6dB) 27.4kW
com8(-10.2dB) 24kW
Mux 1*, Mux 2*, LNR(-14dB) 10kW
Mux A*, Mux B*, Mux C*, Mux D*(-17dB) 5kW
Analogue 5(-18dB) 4kW

Which companies have run the Channel 3 services in the Tacolneston transmitter area

Oct 1959-Feb 2004Anglia Television
Feb 2004-Dec 2014ITV plc
Feb 1983-Dec 1992TV-am•
Jan 1993-Sep 2010GMTV•
Sep 2010-Dec 2014ITV Daybreak•
• Breakfast ◊ Weekends ♦ Friday night and weekends † Weekdays only. Tacolneston was not an original Channel 3 VHF 405-line mast: the historical information shown is the details of the company responsible for the transmitter when it began transmitting Channel 3.

Comments
Friday, 11 November 2011
J
Jane Hore
2:41 PM

ummm, odd it maybe, irritating it most certainly is :))

link to this comment
Jane Hore's 13 posts GB flag
M
Mark Fletcher
sentiment_satisfiedGold

5:04 PM
Halifax

Stephen Lyon.Hard to say without a full postcode.Also you failed to specify what make and model your Dual PVR is.As such all i can say is if you are now unable to receive the high powered BBCA multiplex on ch 55,then come DSO2 on Wednesday 23 November 2011 you will also be unable to receive the remaining high powered multiplexes from Tacolneston.Your box probably does not support the 8k mode and as such unless you replace it then come DSO in under 2 weeks time (Wed 23 Nov 2011) all your new high powered digital channels will not be received at all leaving you with no channels whatsoever on your present Dual PVR that you currently possess.

link to this comment
Mark Fletcher's 673 posts GB flag
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Saturday, 12 November 2011
W
Will
sentiment_satisfiedBronze

9:37 PM

Stephen Lyon: The BBCA multiplex is not going to change at all on the 23rd. As suggested above, check whether your receiver supports the 8k mode.

Another possibility however is that the signal you are receiving is too strong. Mux1 (which carried the BBC channels before) only had an effective radiated power of 10kW compared to BBCA's much higher 100kW. If the signal is too strong for your receiver then you may not be able to find the channels on this mux. If you have any signal boosters installed, try removing them before carrying out a factory reset.

If that doesn't work, try installing an attenuator to reduce the signal strength.

link to this comment
Will's 40 posts GB flag
Sunday, 13 November 2011
S
Stephen Lyon
12:16 PM

Lee, Mark & Will,

Thanks for your replies. I did check the unsupported receivers list but it isn't on there. I think Dual is just a badge for a generic make. I suspect that it doesn't support 8K, rather than too strong a signal, as my LG Monitor/TV gets BBCA after retuning. At least the wife will be happy as she wants a PVR that can record 2 channels at the same time rather than just record 1 and watch 1 like the Dual.

Again, many thanks for taking the trouble to reply.

link to this comment
Stephen Lyon's 5 posts GB flag
J
Jane Hore
5:58 PM

I've looked....and none of those apply. I don't vacuum whilst watching TV and the fridge freezer has always been there during good and bad reception.

Maybe I'll wait until Nov 23 and see how it is then.

link to this comment
Jane Hore's 13 posts GB flag
Monday, 14 November 2011
B
billy
12:44 AM

Cheers for the reply Mike Dimmick :)

Could anyone tell me how you know if you are getting too much signal?

Does too much signal end up in the MUX not locking onto the mux (channels not appearing) or does it mean picture drop outs (similar to a weak signal?)

I am curious as to how you can isolate too much signal as being the problem, especially with a box/tv which does not show a signal bar or SNR value

link to this comment
billy's 12 posts GB flag
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

10:48 AM

billy: The symptoms you see are indeed the same as too little signal. The distorted signal pulls the 'value' of each carrier away from the value it should have, so it's interpreted incorrectly. Some carriers will not be disturbed enough to be misinterpreted, so error correction may be able to determine what most of the missing bits are, and reconstruct a block for the video and audio decoders to display it or play it back. Break-up happens when a block is detected to be uncorrectable or if the decoder runs out of valid data to play back (data is buffered, stored temporarily in memory; problems occur when the buffer runs empty). If the error rate is too severe, then the data which tells the receiver what channels are contained in this multiplex can't be decoded, and the receiver won't store it. In the most severe cases, the special Transmission Parameter Signalling carriers - which use a very robust scheme, transmitted redundantly, to indicate how the rest of the carriers are encoded - can't be decoded and the box won't even know the transmission is there.

There's really no way to tell whether it's too much signal without just trying to reduce the level and see what happens. Try disconnecting the aerial cable. If it works, you have grossly too much signal. If not, try an unamplified indoor aerial. Again, if it starts to work, too much signal. If you have a booster, take that out and see what happens. Amplified splitter in the loft or masthead amp? Bypass it, check the result on one TV.

Even if you have a signal strength meter, it may not be reliable. Each box seems to be calibrated differently. I strongly suspect that some have been calibrated to maximum possible input on one channel, but the distortion is caused by the SUM of all signals being too high, so you have to stay substantially below the maximum limit for 'safe' operation. I've seen reports that some boxes will report low signal levels when the levels are in fact high - my assumption there being that the box responds to not being able to decode by turning up the automatic gain control, and it's actually reporting the gain control level as the signal strength.

I usually look at Digital UK's postcode checker and make a guess. If they're shown as being within a short distance of a main transmitter and/or the prediction is 99-100% across the board, I usually assume too much signal :)

There are actually very few places in the country where you can have too little signal. Generally the problem is too much interference - the frequencies are very heavily reused across the country. It doesn't matter how much you amplify the signal, you amplify the interference just as much, and you add some extra noise from the amplifier itself. Amplification is only useful to offset losses along a cable, or occasionally if you have a very noisy receiver - see Usage and abusage of DTT TV booster amplifiers for how to use boosters correctly.

link to this comment
Mike Dimmick's 2,486 posts GB flag
C
Colin Catchpole
10:58 AM
Dereham

Hi
It is not clear to me so, Please could you tell me when FREEVIEW "HIGH DEFINITION" is likely to be available in NR20 4JR
thank you ,Colin.

link to this comment
Colin Catchpole's 1 post GB flag
Colin's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.