Full Freeview on the Pontop Pike (County Durham, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 54.868,-1.771 or 54°52'5"N 1°46'15"W | DH9 9AT |
The symbol shows the location of the Pontop Pike (County Durham, England) transmitter which serves 700,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Pontop Pike (County Durham, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Pontop Pike transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Pontop Pike transmitter?
BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 15km northeast (42°)
to BBC North East and Cumbria region - 70 masts.
ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 12km north-northeast (29°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
Kieldor Dam | Active deflector | 6 homes Holiday complex | |
Low Haber | Active deflector | West Allen Dale, 18 kn SW Hexham | caravan site |
North Hartlepool | Transposer | 84 homes |
How will the Pontop Pike (County Durham, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | ||||
VHF | C/D E | C/D E | C/D E | C/D E T | W T | ||||
C5 | BBCtvwaves | ||||||||
C32 | SDN | ||||||||
C33 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | ArqB | ||||||||
C39 | BBCA | ||||||||
C42 | D3+4 | ||||||||
C45 | BBCB | ||||||||
C49tv_off | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C54tv_off | C4waves | C4waves | C4waves | D3+4 | |||||
C55tv_off | ArqB | com7tv_off | |||||||
C56tv_off | LNE | ||||||||
C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCA | |||||
C59tv_off | ArqA | ||||||||
C61 | ITVwaves | ITVwaves | ITVwaves | ||||||
C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
com8 | (-11.6dB) 34.6kW | |
com7 | (-11.7dB) 33.8kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 10kW | |
LNE | (-20dB) 5kW |
Local transmitter maps
Pontop Pike Freeview Pontop Pike TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Pontop Pike transmitter area
|
|
Wednesday, 24 February 2021
Why is Sony channel 49 unavailable from Pontop Pike ?
link to this comment |
S
StevensOnln111:09 AM
Mr Brian JE Teasdale: Sony Channel and Sony Movies Classic are both carried on the local TV multiplex, which is only available in areas with a local TV station on Freeview channel 7 or 8. There is a local mux broadcast from Pontop Pike, however I believe it is directional towards Newcasle and may not provide a strong signal in other directions.
link to this comment |
Friday, 12 March 2021
I
Ian Carrick12:06 PM
Hi,
Configuring something called TVHeadEnd linked to an HDHomeRun for the Pontop Pike transponders. Wondering if you can help with some settings. So these are my transponders which I believe are correct:
1=618000
2=642000,
3=666000
4=562000
5=578000
6=586000
7=746000
8=754000
9=570000
What I think I need for each of these is the settings below (a to h). In brackets I have listed out the choices I have, separated by commas.
a. Bandwidth (10Mhz, 8Mhz, 7Mhz, 6Mhz, 5Mhz or 1.712Mhz)
b. Constellation (QAM/AUTO, QPSK, QAM/16, QAM/64, QAM/256)
c. Transmission mode (32k, 16k, 8k, 2k, 1k)
d. Guard Interval (1/32, 1/16, 1/8, 1/4, 1/128, 19/128, 19/256)
e. Hierarchy (NONE, 1, 2, 4)
f. FEC High (1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 7/8)
g. FEC Low (1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 7/8)
h. PLP ID (free text defaults to -1)
Any help with some of the above (realise that some of those settings might not make sense) is hugely appreciated, you helped me out a while ago to get those transponders correct for DVBLink. Cheers.
link to this comment |
C
Chris.SE12:52 PM
Ian Carrick:
The frequencies you've listed are correct BUT no:8 754000kHz (COM8) is no longer being transmitted, it was closed at the end of June 2020 for commercial reasons.
If you see my post on Monday, 9 November 2020 (at the top of p111 here) you'll see all the correct UHF channels listed for Pontop Pike. If you hover over each of the C numbers it gives the frequency.
Bandwidth is always 8MHz.
For the rest of the information, rather than me laboriously listing them, you'll probably be best putting your postcode in the box at Platform management | Freeview and then hover your mouse over the relevant channel numbers and it give you the transmission modes and powers.
link to this comment |
C
Chris.SE12:55 PM
Ian Carrick:
Just to add, the transmission modes and powers are listed at the top of the page but I haven't double checked that all the information is correct and up-to-date as some information on pages on this site has not been fully updated/corrected.
link to this comment |
Tuesday, 10 August 2021
P
P Hanlon5:47 PM
No transmission in Crook, Co Durham since 13.15 and no news about the problem so we are completely in the dark.
link to this comment |
J
Judith Boad6:15 PM
Washington
We have no digital tv channels at all and neither do my two neighbours I am aware that the bilsdale transmitter is on fire but according to maps we are with the pontop pike transmitter at Washington Tyne and Wear NE37 1NT
link to this comment |
Judith's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
S
StevensOnln16:36 PM
Judith Boad: Althought Pontop Pike is closer, Bilsdale is the best predicted transmitter for your postcode, so if you look at your aerial you will probably find that it is pointing approximately South-East towards Bilsdale, hence the loss of signal, rather than roughly West towards Pontop Pike.
link to this comment |
Thursday, 12 August 2021
Hi if I point my aerial at Pontop Pike instead of Bilsdale might I be able to get a TV signal while the Bilsdale transmitter is out of action? Our postcode is TS21 and our aerial is in the loft. I had some service this morning by manually tuning to channel 33 which I think is Pontop Pike but it has disappeared now! Any advice really appreciated.
link to this comment |
And sorry for posting three times, my iPad had a technical issues'!
link to this comment |
Select more comments
Your comment please