Full Freeview on the Chesterfield (Derbyshire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google map | Bing map | Google Earth | 53.283,-1.429 or 53°16'60"N 1°25'43"W | S18 4BT |
The symbol shows the location of the Chesterfield (Derbyshire, England) transmitter which serves 25,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Chesterfield (Derbyshire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Chesterfield transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Chesterfield (Derbyshire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Chesterfield transmitter?
BBC Look North (Leeds) 1.9m homes 7.4%
from Leeds LS9 8AH, 58km north (353°)
to BBC Yorkshire region - 56 masts.
ITV Calendar 1.9m homes 7.4%
from Leeds LS3 1JS, 59km north (351°)
to ITV Yorkshire (Emley Moor) region - 59 masts.
All of lunch, weekend and 80% evening news is shared with Belmont region
How will the Chesterfield (Derbyshire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 5 Feb 2020 | |||||
A K T | A K T | A K T | K T | K T | |||||
C23 | ITVwaves | ITVwaves | ITVwaves | D3+4 | |||||
C26 | BBC2waves | BBC2waves | BBC2waves | BBCA | |||||
C29 | C4waves | C4waves | C4waves | BBCB | BBCB | ||||
C31 | BBCA | ||||||||
C33 | BBC1waves | BBC1waves | BBC1waves | ||||||
C37 | D3+4 | ||||||||
C40 | ArqB | ArqB | |||||||
C43 | SDN | SDN | |||||||
C46 | ArqA | ArqA |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 10 Aug 11 and 24 Aug 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 2kW | |
BBCB | (-4dB) 800W | |
SDN, ARQA, ARQB, BBCA, D3+4 | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux B*, Mux C*, Mux D* | (-17dB) 40W | |
Mux A* | (-20dB) 20W |
Which companies have run the Channel 3 services in the Emley Moor transmitter area
|
|
Wednesday, 24 August 2011
K
KMJ,Derby7:21 PM
whitbread: If you are using the Emley Moor transmitter however, HD will be available at high power from 21st September 2011, or for Waltham the date is 31st August 2011.
link to this comment |
Monday, 29 August 2011
D
DavidHufton2:44 PM
Further to my posting of 28Aug. I am receiving Chesterfield transmitter at S402JH where DSO is completed, but I am still getting dropout on BBC channels and according to my PVR the signal strength is the same as before DSO. Will the signal strength be increased? This site doesn't report any future intention to do this so we might be left with a permanent problem with BBC reception. I already have a mast head booster on my roof aerial and the O.S. map shows us to be line-of-site to the transmitter. I understand some friends in this area have the same problem. Any further comments please?
link to this comment |
J
jb389:41 PM
DavidHufton: Are you absolutely positive that your TV / box is picking up BBC from Chesterfield (Mux Ch26) and not Belmont (Mux Ch22) as that is shown on the reception predictor as being very possible at the post code given.
The only reason I mention this is, because its a very common thing to happen when auto-tuning a TV in any area where signals can be received from more that one station, as the receiving device generally locks onto the first Mux channel it finds. (if strong enough!)
Try a signal check to see what Mux channel is shown.
link to this comment |
P
Paul S Chapman9:54 PM
Chesterfield
Hi.
Just retuned Humax PVR9200T and picking up no stations at all.
Booster installed and digital aerial and all was fine before. Neighbour also complaining of similar problem.
Postcode is S40 3PQ.
Done the reset, even reset to factory defaults.
Any help appreciated.
link to this comment |
Paul's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Tuesday, 30 August 2011
Paul S Chapman: Please remove the booster from your system.
link to this comment |
D
DavidHufton3:25 PM
Chesterfield
jb38: I've just been comparing my LG TV MUXes with the Humax PVR and you are right, automatic tuning has given different results on the two receivers. The Humax has selected Ch57 whereas the LG has selected Ch26. I am going to Manually tune the Humax now hoping there are no complications which might have caused the Humax to have rejected maybe too strong a signal.
Thanks for your help. Do you think Ch57 and 60 I am receiving come from the Hasland relay?
link to this comment |
DavidHufton's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
P
Paul S Chapman4:31 PM
Chesterfield
Paul S Chapman: Please remove the booster from your system.
Hi have done so, complete reset again and still nothing unfortunately.
Any further ideas?
link to this comment |
Paul's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Wednesday, 31 August 2011
D
DavidHufton3:19 PM
Chesterfield
Paul S Chapman: Hello Paul, I have the same Humax as you and I suspect your problem is due to Resetting to default which turns its internal power supply for the mast head amp. off. You have to go to the relevant part of the Menu and turn it on again. This is not possible when doing an OTA SW update for the PVR. I found the only way to do that is to use an external PSU which feeds thro the coax to the aerial. If you are already using an external psu disregard all this. I hope this helps.
link to this comment |
DavidHufton's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
D
DavidHufton3:28 PM
Chesterfield
jb38: Wrt my previous postings. I did a manual retune as in the user manual which is a little difficult to follow. To my suprise it replaced C57 mux with C26 rather than keeping both muxes. This is what I wanted since it only adds to the confusion to keep the unused mux. Signal Strength is up to 90% and Quality 100.
Regards, DH
link to this comment |
DavidHufton's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
J
jb384:56 PM
DavidHufton: Re your 3:25pm query yesterday, yes! its almost certain that the two Mux's referred to are from Hasland, although the BBC one you didn't want (Mux Ch57) may well now be found stored somewhere up in the 800 ranges.
Its possible that the Humax did reject Mux Ch26 during auto-tuning "if" its been slightly too powerful, so your action of manually tuning it is the correct procedure, as tuners (some anyway) are more likely to respond better to a fixed command, this also applying in reverse situations where signals might be a bit on the weak side.
This kind of problem is already widespread across many areas, and wont really calm down until the switchover process has finally been completed, unless that is someone is purchasing a new set that doesn't have area selection facilities attached to the tuning menu, as dependant on location, they might also have to carry out manual tuning to obtain the correct Mux channels for their area.
link to this comment |
Select more comments
Your comment please