Full Freeview on the Malvern (Worcestershire, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google map | Bing map | Google Earth | 52.116,-2.331 or 52°6'56"N 2°19'53"W | WR14 4AD |
The symbol shows the location of the Malvern (Worcestershire, England) transmitter which serves 58,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Malvern (Worcestershire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Malvern transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Malvern (Worcestershire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Malvern transmitter?
BBC Midlands Today 2.9m homes 10.9%
from Birmingham B1 1RF, 49km northeast (36°)
to BBC West Midlands region - 66 masts.
ITV Central News 2.9m homes 10.9%
from Birmingham B1 2JT, 49km northeast (35°)
to ITV Central (West) region - 65 masts.
All of lunch, weekend and 80% evening news is shared with Central (East)
How will the Malvern (Worcestershire, England) transmission frequencies change over time?
1984-97 | 1997-98 | 1998-2011 | 2011-13 | 7 Mar 2018 | |||||
C/D E | C/D E | C/D E | C/D E T | W T | |||||
C29 | SDN | ||||||||
C31 | ArqA | ||||||||
C37 | ArqB | ||||||||
C41 | BBCA | ||||||||
C44 | D3+4 | ||||||||
C47 | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C51tv_off | _local | _local | |||||||
C53tv_off | BBCA | ||||||||
C55tv_off | ArqB | ||||||||
C56tv_off | BBC1waves | BBC1waves | BBC1waves | ||||||
C57tv_off | D3+4 | ||||||||
C59tv_off | -ArqA | ||||||||
C60tv_off | -BBCB | ||||||||
C62 | BBC2waves | BBC2waves | BBC2waves | ||||||
C66 | ITVwaves | ITVwaves | ITVwaves | ||||||
C68 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Sep 11 and 21 Sep 11.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 2kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-7dB) 400W | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-10dB) 200W |
Which companies have run the Channel 3 services in the Sutton Coldfield transmitter area
|
|
Saturday, 24 September 2011
B
Brian WR510:29 PM
Richard, Malvern,
Just a quick PS to my previous post - in relation to your comment about the number of sources, I assume you expect 4 sources because you have two dual-tuner cards? I have a single dual-tuner card and on some channels I am getting 18 sources ...
Brian
link to this comment |
Sunday, 25 September 2011
R
Rich11:19 AM
Sid,
Is there really no way of choosing a transmitter in Media Center 7? Am I just stuck with this problem?
Rich
link to this comment |
R
Richard Worthington12:13 PM
Brian,
Yip - I've got two dual tuners hence expect 4 sources but do get 4,8,12 or 16 on various channels. I had a session yesterday to try and resolve the problems. I bought a variable attenuator from Maplins (Blackpole) and set the power of the signal to around 90% using a TV to show the power/quality. I then had various rounds of setting up the TV signal in media center (MCE)- did notice it would detect (or not detect) different channels on different scans in an inconsistent way. Eventually did get a good scan that detected the channels as expected - I think MCE does strange things if it has channels already so I suggest doing a scan and when it's complete you have the option to delete channels. Do this, reboot and then rescan and this seems to solve the scanning issue.
I also invested in a new graphics card (PNY GT430 Nvidia PC World £59.99) that had hardware video processing since did notice PC was struggling decoding the HD signal.
So by the evening was getting all the channels without any problems and recorded/watched BBC1 and ITV in HD with no problems.
Now this morning am getting interference on BBC1 and ITV1. This got me thinking since had noticed before I had problems in the morning but seemed to be ok later on in the day which led me to think about interference from a source. With a bit of googling came across this
TV Interference Advice, Solve TVI Problems | TVI Filters
Since so close to the Malvern transmitter and close to the fire station this is potentially a problem. I've ordered a filter (via ebay for £10 but this has the details http://www.garex.co.uk/AK…htm) so will let you know if this makes any difference.
BTW you can use 'Sitefinder' Mobile Phone Base Station Database to see if there is a Tetra transmitter close by - I stuck in your postcode and there is one on Williamson Rd so depending on where you live could be an issue.
Will let you know how I get on with the filter !
Cheers,
Richard
(WR141QJ)
link to this comment |
R
Richard Worthington12:20 PM
Malvern
Rich,
Suggest trying the "deleting" approach in my previous post and see if that works
"I think MCE does strange things if it has channels already so I suggest doing a scan and when it's complete you have the option to delete channels. Do this, reboot and then rescan and this seems to solve the scanning issue. "
I did try pulling out the aerial until the scan got to 50% (to get the higher channels) but that didn't seem to work though that was before I deleted the channels first so might be worth a try if the above still doesn't work !
cheers,
Richard
link to this comment |
Richard's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
R
Rich2:06 PM
Richard,
Thanks for the advice. I'll give these things a try!
Cheers,
Rich
link to this comment |
G
Graham5:52 PM
andy walker: I'm receiving all channels off Malvern without any problems - check that you haven't got a sky box or VCR with an RF output tuned to channel 59 (simplest way is to switch them off).
link to this comment |
Monday, 26 September 2011
S
Steve Herbert5:13 PM
Redditch
Hi I can get all channels/progs (quality 8 -10) except the HD ones - there is nothing on channel 60. I have one TV with MPEG4 tuner and one with ATSC. have tried the reset procedure. we use Malvern as there is direct unobstructed line of site to the transmitter and earth bank behind the house precudes Sutton Coldfield. Any ideas? Thanks.
link to this comment |
Steve's: mapS's Freeview map terrainS's terrain plot wavesS's frequency data S's Freeview Detailed Coverage
Tuesday, 27 September 2011
G
gary4:14 PM
Worcester
Today i have low power on ch4 ch5 itv2 4+1 more4 e4 and itv+1
the strange thing being itv1 is fine all these are on PSB2 D3+4 C57 off the malvern transmitter they drop out on the epg all but itv1 again.
I am in WR2 4HH the malvern transmitter reports no engineering i run a wideband aerial through adistrubution amp to 6 sets and viewing has been fine since 21sep switchover till to day?
link to this comment |
gary's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
Wednesday, 28 September 2011
P
Pedro B4:27 PM
I have no C60 9i.e. no HD) from Malvern.
Have retuned.
link to this comment |
B
Brian G5:51 PM
Worcester
I also have no HD channels from Malvern at 17:50 28th September 2011.
link to this comment |
Brian's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
Select more comments
Your comment please